Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Taiyo Yuden's FBMH3225HM202NT is a chip bead data line filter with 2 terminals, ideal for suppressing noise in circuits. Featuring a ferrite chip construction, it offers a max operating temperature of 85°C and DC resistance of 0.13 ohm. With dimensions of L3.2xB2.5xH2.5 mm, this surface mount filter is suitable for applications requiring impedance control at frequencies up to 100 MHz.
Median Price
$0.265
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Newark
1+ parts
$0.106
100+ parts
1k+ parts
-
10k+ parts
Farnell
$0.432
$0.231
$0.202
Mouser Electronics
$0.510
$0.248
$0.163
$0.161
DigiKey
$0.530
$0.254
$0.188
Element14
$0.587
$0.299
$0.198
$0.168
Future Electronics
$0.335
$0.320
Avnet
$0.159
TTI
$0.140
Master Electronics
$0.151
$0.136
Verical
$0.195
$0.167
Chip1Stop
Nova Conductors
$0.148
TME
$0.270
$0.129
$0.109
$0.104
IBS Electronics
$0.170
$0.154
NAC Semi
$0.670
Vyrian
Electro Sonic
$0.160
$0.145
Semi Source
Elcom Components
Connector Distribution Corp
Right Parts Inc.
North Shore Components
Prism Electronics
Bas Electronics GmbH & Co. KG
Semicontronic
$0.062
$0.060
Ampacity Inc.
$0.135
Argo Parts USA
$0.143
Netroflash
Continental Prestige Electronics
$0.348
Advanced Electronics
$1.490
$1.356
$1.222
Corohmni
$1.840
Aztec Data Supply Inc.
$2.970
Abacus Technologies
Eastek
Provides effective filtering for reducing electromagnetic interference and noise in data lines, ensuring data signal integrity.
Allows the filter to withstand higher temperatures, making it suitable for a wide range of operating environments.
Effective in filtering out noise and interference at frequencies starting from 100 MHz, ensuring smooth data transmission.
Helps in matching impedance levels in the circuit, leading to improved signal quality and reduced reflections.
Capable of handling high currents up to 1.2 A, making it suitable for various electronic devices and applications.
Data Line Filters FBMH3225HM202NT attributes and parameters. Explore more Data Line Filters devices from Taiyo Yuden
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Width (mm):
FBMH3225HM202NT Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Part Number - Mult Devs Part Number 23/Sep/2022
PCN Part Status Change - Mult Devs NRND 01/Apr/2023
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Microchip Technology
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
ACM1513-551-2PL-TLHF
TDK
ACM1513-551-2PL-TLHF by TDK is a Data Line Filter with 10A rated current, 50V rated voltage, and 550 ohm output impedance. It has 2 functions and operates b/w -40°C to 85°C. Ideal for applications requiring noise filtering in data lines.
744273801
Wuerth Elektronik & Kg
Wurth Elektronik 744273801 is a Data Line Filter with 2 functions, rated at 80V. It has an inductance of 9uH and operates b/w -40 to 125°C. Ideal for applications requiring filtering of data lines, it offers low DC resistance of 0.011 ohm and output impedance of 800 OHM.
BLM15HG601SN1D
Murata Manufacturing
BLM15HG601SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
ACM12V-701-2PL-TL00
TDK's ACM12V-701-2PL-TL00 data line filter has 2 functions, rated at 80V and 8A. With a wide temperature range (-40 to 125°C), it is ideal for automotive applications requiring high insulation resistance (10 Mohm) and low DC resistance (0.006 ohm).
ACM1211-102-2PL
ACM1211-102-2PL by TDK is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 85°C. Ideal for applications requiring high insulation resistance, low DC resistance, and surface mounting type.
BLM18EG471SN1D
Murata Manufacturing's BLM18EG471SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of 1.6x0.8x0.8 mm, it offers a max frequency of 1000 MHz and DC resistance of 0.21 ohm. Ideal for surface mount applications in electronics requiring impedance control up to 550 OHM at frequencies ranging from 100 MHz to 1000 MHz.
FLTR75V05Z
Ge Power Electronics
DATA LINE FILTER MODULE; Maximum DC Resistance: .02 ohm; Rated Current: 5 A; Minimum Operating Temperature: -40 Cel; Rated Voltage: 75 V; Dimensions: L25.4XB25.4XH10.16 (mm)/L1.0XB1.0XH0.4 (inch);
BLM18PG471SH1J
Murata Manufacturing's BLM18PG471SH1J is a chip bead data line filter with 2 terminals, AEC-Q200 screening. With dimensions of 1.6x0.8x0.8mm, it offers 470 OHM output impedance and operates b/w -55 to 125°C. Ideal for surface mount applications in automotive electronics due to its ferrite construction and rated current of 1A.
BLM41PG181SN1L
BLM41PG181SN1L by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers 180 OHM output impedance, 0.025 ohm DC resistance, and supports frequencies from 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression.
74279207
Wurth Elektronik 74279207 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a max frequency of 400 MHz. Ideal for surface mount applications in electronics to suppress noise and interference on data lines up to 100 OHM impedance.
MPZ1005S121CT
The TDK MPZ1005S121CT is a chip bead data line filter with 2 terminals, rated for 1.2A current and 120 ohm output impedance. It operates b/w -40°C to 85°C, suitable for applications requiring noise suppression in circuits up to 100MHz frequency range. Dimensions: L1.0xB0.5xH0.5 (mm).
MPZ1005S121CT000
TDK's MPZ1005S121CT000 is a chip bead data line filter with 2 terminals, rated for 1.2A current and 120 ohm output impedance. With dimensions of L1.0xB0.5xH0.5 mm, it operates b/w -40 to 85°C and is ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM18EG221SN1D
Murata Manufacturing's BLM18EG221SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 260 ohm at frequencies ranging from 100 MHz to 1000 MHz.
FBMJ2125HS420-T8
Taiyo Yuden
Taiyo Yuden's FBMJ2125HS420-T8 is a Ferrite Chip Data Line Filter with 2 terminals, 125°C max temp, -40°C min temp. It has 1.25mm width, 2mm length, and 0.008 ohm DC resistance. With an output impedance of 42Ω and rated current of 4A, it's ideal for surface mount applications in electronics to reduce electromagnetic interference.
74279262
74279262 by Wurth Elektronik is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It has a max operating temperature of 125°C and min frequency of 100 MHz. With dimensions of L1.6xB0.8xH0.8 (mm), it offers an output impedance of 120 OHM and rated current of 1.35 A, making it ideal for surface mount installations in electronic devices.
BL01RN1A1F1J
Murata Manufacturing's BL01RN1A1F1J is a data line filter with a ferrite bead filter type. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This through-hole mount filter has dimensions of D3.6XH5.0 (mm) and is suitable for applications requiring a rated current of 6 A.
CM4440Z121R-10
Laird Technologies
The Laird Technologies CM4440Z121R-10 is a Data Line Filter with 3 functions, rated at 100V and 20A. It operates b/w -40°C to 125°C, with a max DC resistance of 0.001 ohm. This filter is ideal for applications requiring noise suppression in data lines.
FBMJ2125HS420-T
Taiyo Yuden's FBMJ2125HS420-T is an 0805 chip bead filter with 2 terminals. With a max operating temp of 85°C and min of -40°C, it offers low DC resistance of 0.008 ohm and output impedance of 42 OHM at 100 MHz. Ideal for data line filtering applications, this ferrite chip measures L2.0xB1.25xH0.85 mm and can handle a rated current of 4 A in surface mount installations.
MH1608-601Y
Bourns
The Bourns MH1608-601Y is a chip bead data line filter with 2 terminals, offering 0.2 Mohm insulation resistance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55 to 125°C and has a max frequency of 100 MHz. Ideal for applications requiring a compact surface mount filter with an output impedance of 600 ohms.
MMZ2012Y102BT000
MMZ2012Y102BT000 by TDK is a chip bead data line filter with 2 terminals, rated current of 0.5A, and max DC resistance of 0.3 ohm. It is used for filtering in electronic circuits due to its ferrite construction and output impedance of 1000 ohm. Operating temperatures range from -55 to 125 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FBMH3225HM102NT
FBMH3225HM102NT by Taiyo Yuden is a chip bead data line filter with 2 terminals, rated for 2A current. Featuring ferrite chip construction, it operates b/w -40°C to 85°C and offers an output impedance of 1000Ω at frequencies ranging from 100MHz. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.
FBMH3225HM601NT
Taiyo Yuden's FBMH3225HM601NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85°C, offering 600 OHM impedance at 100 MHz. Ideal for surface mount applications, it measures L3.2xB2.5xH2.5 mm and has a max DC resistance of 0.042 ohm.
FBMH3225HM601NTV
FERRITE CHIP; Maximum DC Resistance: .042 ohm; Rated Current: 3 A; Mounting Type: SURFACE MOUNT; Length: 3.2 mm; Maximum Operating Temperature: 125 Cel;
FBMH1608HM102-T
Taiyo Yuden's FBMH1608HM102-T is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it operates b/w -40 to 125 °C and has a max DC resistance of 0.35 ohm. Ideal for surface mount applications, it offers an output impedance of 1000 OHM at a min frequency of 100 MHz.
FBMH4532HM132-T
FBMH4532HM132-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, rated for 3A current. Featuring ferrite construction, it offers an output impedance of 1300Ω and operates b/w -40°C to 85°C. Ideal for surface mount applications, this filter measures L4.5xB3.2xH3.2mm and is designed for frequencies ranging from 100MHz with a max DC resistance of 0.06Ω.
FBMH3225HM601NT8
Taiyo Yuden's FBMH3225HM601NT8 is a Ferrite Chip Data Line Filter with 2 terminals, 600 Ohm output impedance, and 3A rated current. It operates b/w -40°C to 125°C, measures 3.2mm in length, and is ideal for surface mount applications requiring noise suppression in electronic circuits.
FBMH3216HM221NT
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .02 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 4 A;
FBMH3216HM221NTV
Taiyo Yuden's FBMH3216HM221NTV is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 220 ohm and operates b/w -40°C to 125°C. Ideal for surface mount applications requiring effective noise filtering in compact spaces.
FBMH4532HM681-T
FBMH4532HM681-T by Taiyo Yuden is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.
FBMH1608HM601-T
Taiyo Yuden's FBMH1608HM601-T is a chip bead data line filter with 2 terminals, rated for 0.7A current and 600 ohm output impedance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -40°C to 85°C, ideal for noise suppression in high-frequency applications up to 100MHz.
FBMH2012HM221-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .06 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
FBMH3225HM102NTV
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; Mounting Type: SURFACE MOUNT; Length: 3.2 mm; Packing Method: TR, EMBOSSED;
FBMH1608HM101-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .035 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
FBMH1608HM600-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .025 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
FBMH3216HM221NT8
FERRITE CHIP; Maximum DC Resistance: .02 ohm; Rated Current: 4 A; No. of Terminals: 2; Packing Method: TR, EMBOSSED; Height: 1.6 mm;
FBMH1608HM601-TV
Taiyo Yuden's FBMH1608HM601-TV is a Ferrite Chip Data Line Filter with 2 terminals, rated for 0.9A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers 600 ohm output impedance and operates b/w -40 to 125°C. Ideal for surface mount applications in various electronic devices requiring noise suppression.
FBMH4525HM102NT
Taiyo Yuden's FBMH4525HM102NT is a chip bead data line filter with 2 terminals, rated for 3A current. With dimensions of L4.5xB2.5xH2.5 mm, it operates b/w -40 to 85°C and offers a max DC resistance of 0.06 ohm. Ideal for surface mount applications, this ferrite chip filter has an output impedance of 1000 ohms at frequencies ranging from 100 MHz.
FBMH4525HM102NTV
FERRITE CHIP; Maximum DC Resistance: .06 ohm; Rated Current: 3 A; Output Impedance (ohm): 1000 OHM; Dimensions: L4.5XB2.5XH2.5 (mm)/L0.177XB0.098XH0.098 (inch); JESD-609 Code: e3;
FBMH1608HM601-T8
FERRITE CHIP; Maximum DC Resistance: .17 ohm; Rated Current: .9 A; No. of Functions: 1; Output Impedance (ohm): 600 OHM; Packing Method: PAPER, TAPE;
FBMH3225HM202-T
Data Line Filters; Construction: Chip Bead; Maximum DC Resistance: .13 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1.2 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved