Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Taiyo Yuden's FBMH3225HM102NTV is a Ferrite Chip Data Line Filter with 2 terminals, rated for 2A current. It operates b/w -40°C to 125°C, offering a max DC resistance of 0.1 ohm and an output impedance of 1000 ohm. Ideal for surface mount applications requiring effective noise filtering in compact spaces.
Median Price
$0.683
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
$0.514
100+ parts
$0.251
1k+ parts
$0.188
10k+ parts
-
Newark
$0.358
$0.281
Mouser Electronics
$0.840
$0.414
$0.280
$0.275
Element14
$0.897
$0.429
$0.273
$0.262
DigiKey
$0.950
$0.447
$0.338
Avnet
$0.197
$0.176
TTI
$0.287
$0.270
Chip1Stop
Nova Conductors
$0.225
Vyrian
Semicontronic
$0.154
$0.150
$0.149
Ampacity Inc.
Corohmni
$0.216
Argo Parts USA
$0.218
Continental Prestige Electronics
$0.488
$0.241
Advanced Electronics
$0.662
$0.602
$0.543
Aztec Data Supply Inc.
$2.530
Abacus Technologies
Authorized Procurement Solutions
Perfect Parts
Netroflash
$0.220
$0.214
$0.209
Having 2 terminals allows for easy connectivity and integration into a circuit.
The ferrite chip filter type ensures effective filtering of unwanted noise and interference in data lines.
With a high maximum operating temperature, this data line filter can withstand challenging environmental conditions.
The low minimum operating temperature enables this filter to function reliably even in cold environments.
The compact width of 2.5mm allows for space-efficient installation in various electronic devices.
The low maximum DC resistance ensures minimal impact on the overall circuit performance.
The length of 3.2mm provides a balance between compact size and effective filtering capabilities.
The output impedance of 1000 ohms helps in maintaining signal integrity and reducing signal loss.
The TR embossed packing method ensures secure storage and easy handling during transportation and assembly.
The surface mounting type allows for convenient and secure attachment to PCBs without the need for through-holes.
The compact dimensions make this data line filter suitable for space-constrained electronic applications.
With a rated current of 2A, this filter can handle moderate to high power loads effectively.
The low height profile of 2.5mm allows for flexible placement within electronic devices without occupying excessive space.
Data Line Filters FBMH3225HM102NTV attributes and parameters. Explore more Data Line Filters devices from Taiyo Yuden
Additional Features:
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Width (mm):
FBMH3225HM102NTV Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Part Number - Mult Devs Part Number 23/Sep/2022
PCN Part Status Change - Mult Devs NRND 01/Apr/2023
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
DP83848IVVX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
LI0402C221R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .35 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
MMZ2012Y202BTD25
TDK
MMZ2012Y202BTD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP construction, it has 2 terminals and operates b/w -55 to 125 °C. With a max DC resistance of 0.5 ohm, it is ideal for automotive applications requiring an output impedance of 2000 OHM.
HI3312X101R-10
Laird Technologies
HI3312X101R-10 by Laird Technologies is a Ferrite Chip Data Line Filter with 100 OHM output impedance, 10 A rated current, and operates b/w -40 to 125 °C. It is used for noise suppression in data lines, featuring surface mounting type and compact dimensions of L8.5XB3.05XH2.28 mm.
BLM15BB121SN1D
Murata Manufacturing
Murata Manufacturing's BLM15BB121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.0XB0.5XH0.5 (mm), it offers a max frequency of 100 MHz and output impedance of 120 OHM. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.3 A and DC resistance of 0.55 ohm, making it suitable for noise suppression in electronic circuits.
742792640
Wuerth Elektronik & Kg
Wurth Elektronik 742792640 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and output impedance of 300 OHM. Ideal for surface mount applications in electronics to filter frequencies from 100 MHz to 250 MHz.
SBSPP1000103MXT
Knowles Precision Devices
SBSPP1000103MXT by Knowles Precision Devices is a 100 V rated data line filter with inductance of 0.25 uH, max insertion loss of 60 dB, and max DC resistance of 0.5 ohm. It is ideal for surface mount applications requiring high capacitance filtering in a compact L3.2XB1.6XH1.6 mm package.
DLP11SN331HL2L
Murata Manufacturing's DLP11SN331HL2L is a data line filter with 2 functions, rated at 5V and 0.08A. It offers an output impedance of 330 ohm, suitable for applications requiring noise suppression in data lines. With dimensions of L1.25xB1.0xH0.82 (mm), it is designed for surface mount installation in various electronic devices.
744273801
Wurth Elektronik 744273801 is a Data Line Filter with 2 functions, rated at 80V. It has an inductance of 9uH and operates b/w -40 to 125°C. Ideal for applications requiring filtering of data lines, it offers low DC resistance of 0.011 ohm and output impedance of 800 OHM.
MPZ1608S601AT
TDK's MPZ1608S601AT is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, this ferrite chip has a DC resistance of 0.15 ohm and output impedance of 600 OHM.
DLW5BTM142TQ2L
DLW5BTM142TQ2L by Murata is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. It has a min insulation resistance of 10 Mohm and output impedance of 1400 ohm. Ideal for applications requiring noise suppression in data lines.
MMZ2012S102ATD25
MMZ2012S102ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP construction, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L2.0XB1.25XH0.85 (mm), it offers a max DC resistance of 0.35 ohm and output impedance of 1000 OHM, making it ideal for automotive applications due to its high rated current of 0.5 A.
ACM4520-142-2P-T000
ACM4520-142-2P-T000 by TDK is a Data Line Filter with 2 functions, rated at 50V and 1.5A. It offers a min insulation resistance of 10 Mohm, operating b/w -40 to 85 °C. Ideal for applications requiring noise suppression in data lines.
BLM18PG471SH1J
Murata Manufacturing's BLM18PG471SH1J is a chip bead data line filter with 2 terminals, AEC-Q200 screening. With dimensions of 1.6x0.8x0.8mm, it offers 470 OHM output impedance and operates b/w -55 to 125°C. Ideal for surface mount applications in automotive electronics due to its ferrite construction and rated current of 1A.
742792096
742792096 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with 2 terminals, suitable for surface mount applications. It has dimensions of L2.0xB1.2xH0.9 (mm) and operates b/w -55 to 125 °C, offering a max DC resistance of 0.3 ohm at 100 MHz frequency. Ideal for maintaining signal integrity in electronic circuits with an output impedance of 1000 OHM and rated current of 1 A.
BLM31PG121SN1B
Murata's BLM31PG121SN1B is a chip bead filter with 2 terminals, rated for 3A current. With dimensions of L3.2xB1.6xH1.1mm, it operates b/w -55 to 125°C and offers an output impedance of 120Ω at frequencies ranging from 100MHz to DC. Ideal for data line filtering applications due to its ferrite construction and surface mounting type.
MPZ2012S601ATD25
The TDK MPZ2012S601ATD25 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0XB1.25XH0.85 (mm), it is ideal for surface mount applications requiring an output impedance of 600 OHM at a rated current of 2 A.
SRF0905-501Y
Bourns
Bourns SRF0905-501Y is a 2-function data line filter with inductance of 500uH and rated current of 1A. It operates b/w -40 to 105°C, has a max DC resistance of 0.15 ohm, and output impedance of 1000 ohm. Ideal for surface mount applications in electronics for noise filtering and signal conditioning.
ACM1211-701-2PL-TL01
ACM1211-701-2PL-TL01 by TDK is a FERRITE CHIP data line filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has 4 terminals, dimensions of L12.0xB11.0xH6.0 (mm), and insulation resistance of 10 Mohm. Ideal for applications requiring high impedance filtering in compact spaces.
PA3747.505NL
Pulse Electronics
PA3747.505NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 3330 uH inductance. It operates b/w -40 to 125 °C and has a max DC resistance of 0.1035 ohm. Ideal for applications requiring high output impedance like automotive electronics.
74279274
Wurth Elektronik 74279274 is a multi-layer FERRITE CHIP filter with dimensions of L1.0XB0.5XH0.5 (mm). It operates b/w -55 to 125 °C, has a DC resistance of 0.25 ohm, and an output impedance of 30 OHM. Ideal for data line filtering applications up to 500 MHz frequency range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FBMH3225HM102NT
Taiyo Yuden
FBMH3225HM102NT by Taiyo Yuden is a chip bead data line filter with 2 terminals, rated for 2A current. Featuring ferrite chip construction, it operates b/w -40°C to 85°C and offers an output impedance of 1000Ω at frequencies ranging from 100MHz. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.
FBMH3225HM601NT
Taiyo Yuden's FBMH3225HM601NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85°C, offering 600 OHM impedance at 100 MHz. Ideal for surface mount applications, it measures L3.2xB2.5xH2.5 mm and has a max DC resistance of 0.042 ohm.
FBMH3225HM601NTV
FERRITE CHIP; Maximum DC Resistance: .042 ohm; Rated Current: 3 A; Mounting Type: SURFACE MOUNT; Length: 3.2 mm; Maximum Operating Temperature: 125 Cel;
FBMH1608HM102-T
Taiyo Yuden's FBMH1608HM102-T is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it operates b/w -40 to 125 °C and has a max DC resistance of 0.35 ohm. Ideal for surface mount applications, it offers an output impedance of 1000 OHM at a min frequency of 100 MHz.
FBMH4532HM132-T
FBMH4532HM132-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, rated for 3A current. Featuring ferrite construction, it offers an output impedance of 1300Ω and operates b/w -40°C to 85°C. Ideal for surface mount applications, this filter measures L4.5xB3.2xH3.2mm and is designed for frequencies ranging from 100MHz with a max DC resistance of 0.06Ω.
FBMH3225HM601NT8
Taiyo Yuden's FBMH3225HM601NT8 is a Ferrite Chip Data Line Filter with 2 terminals, 600 Ohm output impedance, and 3A rated current. It operates b/w -40°C to 125°C, measures 3.2mm in length, and is ideal for surface mount applications requiring noise suppression in electronic circuits.
FBMH3216HM221NT
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .02 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 4 A;
FBMH3225HM202NT
Taiyo Yuden's FBMH3225HM202NT is a chip bead data line filter with 2 terminals, ideal for suppressing noise in circuits. Featuring a ferrite chip construction, it offers a max operating temperature of 85°C and DC resistance of 0.13 ohm. With dimensions of L3.2xB2.5xH2.5 mm, this surface mount filter is suitable for applications requiring impedance control at frequencies up to 100 MHz.
FBMH3216HM221NTV
Taiyo Yuden's FBMH3216HM221NTV is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 220 ohm and operates b/w -40°C to 125°C. Ideal for surface mount applications requiring effective noise filtering in compact spaces.
FBMH4532HM681-T
FBMH4532HM681-T by Taiyo Yuden is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.
FBMH1608HM601-T
Taiyo Yuden's FBMH1608HM601-T is a chip bead data line filter with 2 terminals, rated for 0.7A current and 600 ohm output impedance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -40°C to 85°C, ideal for noise suppression in high-frequency applications up to 100MHz.
FBMH2012HM221-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .06 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
FBMH1608HM101-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .035 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
FBMH1608HM600-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .025 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
FBMH3216HM221NT8
FERRITE CHIP; Maximum DC Resistance: .02 ohm; Rated Current: 4 A; No. of Terminals: 2; Packing Method: TR, EMBOSSED; Height: 1.6 mm;
FBMH1608HM601-TV
Taiyo Yuden's FBMH1608HM601-TV is a Ferrite Chip Data Line Filter with 2 terminals, rated for 0.9A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers 600 ohm output impedance and operates b/w -40 to 125°C. Ideal for surface mount applications in various electronic devices requiring noise suppression.
FBMH4525HM102NT
Taiyo Yuden's FBMH4525HM102NT is a chip bead data line filter with 2 terminals, rated for 3A current. With dimensions of L4.5xB2.5xH2.5 mm, it operates b/w -40 to 85°C and offers a max DC resistance of 0.06 ohm. Ideal for surface mount applications, this ferrite chip filter has an output impedance of 1000 ohms at frequencies ranging from 100 MHz.
FBMH4525HM102NTV
FERRITE CHIP; Maximum DC Resistance: .06 ohm; Rated Current: 3 A; Output Impedance (ohm): 1000 OHM; Dimensions: L4.5XB2.5XH2.5 (mm)/L0.177XB0.098XH0.098 (inch); JESD-609 Code: e3;
FBMH1608HM601-T8
FERRITE CHIP; Maximum DC Resistance: .17 ohm; Rated Current: .9 A; No. of Functions: 1; Output Impedance (ohm): 600 OHM; Packing Method: PAPER, TAPE;
FBMH3225HM102N
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved