Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel; Length: 1.6 mm; Mounting Type: SURFACE MOUNT;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters BK1608HS101-T attributes and parameters. Explore more Data Line Filters devices from Taiyo Yuden
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Terminal Finish:
Width (mm):
BK1608HS101-T Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
1554216002
Molex
WIRE AND CABLE;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
742792716
Wuerth Elektronik & Kg
Wurth Elektronik 742792716 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C. With dimensions of L1.0xB0.5xH0.5 (mm), it's ideal for surface mount applications requiring output impedance of 60 ohm and rated current of 0.3A.
KBMF01SC6
STMicroelectronics KBMF01SC6 is a DATA LINE FILTER with 2 functions and 5 terminals. It has a max operating temperature of 70°C, DC resistance of 39 ohm, and capacitance of 120 uF. Ideal for IEC-approved applications requiring surface mount filters in compact dimensions L3.05xB1.75xH1.45 mm.
NFM21PC475B1A3D
Murata Manufacturing
Murata Manufacturing's NFM21PC475B1A3D is a data line filter with 100 Mohm insulation resistance, 10V rated voltage, and 4700000 uF capacitance. It is ideal for applications requiring noise suppression in electronic circuits.
B82789C0104N002
TDK
TDK B82789C0104N002 is a data line filter with 2 functions, rated voltage of 80V, and inductance of 100uH. It operates b/w -55°C to 125°C, has matte tin over nickel finish, and dimensions of L4.5xB3.2xH3.0mm. Ideal for applications requiring filtering in data lines with a max current rating of 0.15A.
1250F-003
Spectrum Control
DATA LINE FILTER; Maximum DC Resistance: .01 ohm; Rated Current: 10 A; Rated Voltage: 200 V; No. of Functions: 1; Additional Features: PI-TYPE CIRCUIT;
742792133
Wurth Elektronik 742792133 is a FERRITE CHIP Data Line Filter with dimensions L3.2XB1.6XH1.1 (mm). It has a Max Operating Temperature of 125°C and Min Operating Temperature of -55°C, suitable for surface mount applications with a rated current of 0.5 A and output impedance of 600 OHM.
744220203
Wurth Elektronik 744220203 is a Data Line Filter with 2 functions and rated voltage of 80V. It has inductance of 20000uH, max operating temp of 125°C, and DC resistance of 2.6 ohm. Ideal for applications requiring noise suppression in data lines with approval from IEC standards.
NFL21SP107X1C3D
Murata Manufacturing's NFL21SP107X1C3D is a 16V data line filter with 1000 Mohm insulation resistance. Featuring 0.135 uH inductance and 44 uF capacitance, it operates b/w -55 to 125 °C. Ideal for surface mount applications, this filter has three terminals and is packed in tape format.
FBMJ2125HS420-T
Taiyo Yuden
Taiyo Yuden's FBMJ2125HS420-T is an 0805 chip bead filter with 2 terminals. With a max operating temp of 85°C and min of -40°C, it offers low DC resistance of 0.008 ohm and output impedance of 42 OHM at 100 MHz. Ideal for data line filtering applications, this ferrite chip measures L2.0xB1.25xH0.85 mm and can handle a rated current of 4 A in surface mount installations.
MI0805K400R-10
Steward
FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: 1.5 A; Minimum Operating Temperature: -55 Cel; Length: 2 mm; Dimensions: L2.0XB1.25XH0.9 (mm)/L0.079XB0.049XH0.035 (inch);
FLTR75V05Z
Ge Power Electronics
DATA LINE FILTER MODULE; Maximum DC Resistance: .02 ohm; Rated Current: 5 A; Minimum Operating Temperature: -40 Cel; Rated Voltage: 75 V; Dimensions: L25.4XB25.4XH10.16 (mm)/L1.0XB1.0XH0.4 (inch);
BLM31SN500SN1L
Murata Manufacturing's BLM31SN500SN1L is a FERRITE CHIP filter with 2 terminals, rated for 10A current. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55 to 125 °C and has a max DC resistance of 0.0021 ohm. Ideal for data line filtering applications due to its 50 OHM output impedance and surface mounting type.
CM5441Z161B-10
Laird Technologies
The Laird Technologies CM5441Z161B-10 is a data line filter with 2 functions and 4 terminals. It has a max DC resistance of 0.0003 ohm and an output impedance of 160 OHM, suitable for applications requiring a rated current of 75 A. This through-hole mount filter measures L13.72XB10.41XH15.24 mm and is ideal for use in electronic devices to reduce electromagnetic interference.
NFM21CC223R1H3D
Murata Manufacturing's NFM21CC223R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 22000 uF capacitance. It is a feed-through capacitor suitable for applications requiring filtering in temperatures ranging from -55 to 125 °C.
BNX025H01L
Murata Manufacturing's BNX025H01L is a 25V DATA LINE FILTER with 50 Ohm output impedance. AEC-Q200 compliant, it operates b/w -55°C to 125°C. Ideal for automotive applications due to its high insulation resistance and 15A rated current capacity.
SNUF6401MNT1G
SNUF6401MNT1G by Onsemi is a data line filter with 6 functions, AEC-Q100 screening level, and 12 terminals. It operates b/w -40°C to 85°C, has a max DC resistance of 115 ohm, and output impedance of 50 ohm. Widely used in automotive applications for noise filtering in data lines due to its compact dimensions (L3.0XB1.35XH1.0 mm).
BLM18AG102SN1J
Murata Manufacturing's BLM18AG102SN1J is a chip bead data line filter with 2 terminals, 0603 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.5 ohm, and output impedance of 1000 OHM. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
W2F15C4738AT1F
W2F15C4738AT1F by KYOCERA AVX is a data line filter with 3 terminals, rated for 50V and 0.3A current. Featuring a feed through capacitor design, it offers high insulation resistance of 1000 Mohm and capacitance of 47000 uF. Ideal for applications requiring surface mount filters in temperature range -55 to 125 °C.
NUF4001MUT2G
NUF4001MUT2G by Onsemi is a 4-function data line filter with 25 dB attenuation at 800 MHz. It operates b/w -40 to 85 °C and has a max DC resistance of 115 ohm. Ideal for applications requiring noise filtering in data lines, it comes in a compact surface mount package measuring L1.8xB1.2xH0.55 mm.
744822222
Wurth Elektronik 744822222 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 2200uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.07 ohm. Ideal for applications requiring noise suppression in data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved