Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RM2012A-103/103-PBVW10 by Susumu is a thin film resistor array with 10000 ohm resistance, 0.1% tolerance, and 31.6228 V operating voltage. It is used in AEC-Q200 compliant applications requiring precise resistance values in compact SMT packages.
Median Price
$2.010
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.930
100+ parts
$0.895
1k+ parts
$0.612
10k+ parts
$0.551
DigiKey
$2.090
$0.967
$0.785
-
Nova Conductors
$0.557
Vyrian
NAC Semi
$0.980
$0.891
IBS Electronics
$0.775
$0.656
Prism Electronics
Bristol Electronics
Flex Direct, LLC
Aztec Data Supply Inc.
$0.360
Corohmni
$0.458
Continental Prestige Electronics
$0.545
Argo Parts USA
$0.540
Netroflash
Perfect Parts
Authorized Procurement Solutions
XScomponents
$1.130
Futuretech Components
This low power dissipation makes this resistor network suitable for applications where energy efficiency is important.
With a high rated temperature, this resistor network can operate reliably in various temperature environments.
The two functions in this resistor network provide versatility and flexibility in circuit design.
The thin film technology used in this resistor network ensures high precision and stability in resistance values.
The rectangular package shape allows for easy installation and space-saving on PCBs.
The rectangular construction design simplifies the assembly process and enhances durability.
The embossed packing method ensures protection during transportation and storage.
The 0805 size code is a common standard, allowing for easy compatibility with various electronic components.
The isolated network type prevents interference between resistors, ensuring accurate and reliable circuit operation.
With a resistance of 10000 ohm, this resistor network is suitable for a wide range of applications.
The four terminals provide multiple connection options, increasing the versatility of the resistor network.
This low temperature coefficient tracking ensures stable resistance values across temperature variations.
The surface mount package style enables easy and secure installation on PCBs.
The wraparound terminal shape ensures a strong and reliable connection in the circuit.
With a high maximum operating temperature, this resistor network can withstand high heat conditions.
The consistent resistance value of 10000 ohm in the first element ensures uniform performance.
The low minimum operating temperature allows for operation in cold environments.
The low temperature coefficient of 25 ppm/°C ensures minimal resistance changes with temperature fluctuations.
The matte tin terminal finish provides corrosion resistance and enhances solder joint reliability.
The consistent resistance value of 10000 ohm in the second or last element maintains uniform performance.
The slim profile of 0.45 mm height makes this resistor network suitable for compact electronic designs.
The array/network resistor type provides multiple resistors in a single package, saving space and simplifying circuit design.
The high operating voltage capability of 31.6228 V allows for use in a wide range of voltage applications.
The tight tolerance of 0.1% ensures accurate and precise resistance values in the circuit.
The compact length of 2 mm offers space-saving advantages in circuit layout and design.
The surface mounting type simplifies installation and ensures secure attachment to the PCB.
With a rated power dissipation of 0.1 W, this resistor network can handle higher power requirements.
Compliant with the AEC-Q200 standard, this resistor network meets automotive industry requirements for reliability and performance.
The narrow width of 1.25 mm allows for efficient use of PCB space and easy integration into tight layouts.
Resistor Networks & Arrays RM2012A-103/103-PBVW10 attributes and parameters. Explore more Resistor Networks & Arrays devices from Susumu
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Resistor Type:
Second or Last Element Resistance:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Temperature Coef Tracking:
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
RM2012A-103/103-PBVW10 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.20
SB
8533.21.00.25
As a specialist in thin film technology and resistors, we can turn your ideas into reality. Since our founding in 1964, we have pursued the originality of thin films through research into thin film technology and product development. A corporate culture that dedicates itself to commercialization in the face of difficulties, self-confidence cultivated through repeated basic research, and unique development capabilities enabled by experienced thin-film technology. This is the reason why Susumu is able to acquire a global position and trust. We have the ability to integrate organically while improving each technology. In particular, our thin film deposition technology is backed by our high level of basic research, and there are things that surpass our competitors. Thin film formation technology (plasma reaction method, sputtering, vacuum deposition method, etc.) Fine photo-etching technology (flat/curved surface etching) Microlaser technology (pattern generation, trimming, scribing, etc.) High-density packaging technology (BGA, ultra-small chips, etc.)
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
M8340105K1003JG
Defense Logistics Agency
ARRAY/NETWORK RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
MNR04M0APJ390
ROHM
ROHM's MNR04M0APJ390 resistor network features 4 functions with 39 ohm resistance, 0.063 W power dissipation, and 70°C rated temperature. Ideal for applications requiring a surface mount package with isolated network type and 25V operating voltage.
4609X-101-103LF
Bourns
Bourns 4609X-101-103LF is a resistor network with 8 elements, each at 10000 ohm resistance. It has a power dissipation of 0.2 W and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance values in compact spaces.
EXB2HV390JV
Panasonic
Panasonic EXB2HV390JV is a 39 ohm resistor network with 8 functions, rated at 0.063 W power dissipation. Ideal for surface mount applications, it features a temperature coefficient of 200 ppm/°C and operates b/w -55 to 125 °C. AEC-Q200 compliant, this isolated network has a tolerance of 5% and can handle up to 25 V operating voltage.
Y5076V0004TT0L
Vishay Intertechnology
Vishay Intertechnology Y5076V0004TT0L is a hermetically sealed resistor array with 1000 ohm resistance, 0.01% tolerance, and 200 V operating voltage. Ideal for PCB mounting applications requiring precise temperature coefficient of 2 ppm/°C and divider network type functionality.
752241222GPTR7
Cts
752241222GPTR7 by Cts is a Resistor Network with 22 elements, each having a resistance of 2200 ohm. It features a power dissipation of 2W and operates b/w -55 to 125 °C. This SMT package is ideal for applications requiring precise resistance values in compact electronic devices.
EXB28V330JX
Panasonic's EXB28V330JX is a resistor network with 4 functions, 33 ohm resistance, and 5% tolerance. It operates at temperatures from -55 to 125 °C and has a power dissipation of 0.063 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
4610X-102-152LF
4610X-102-152LF by Bourns is a 5-function resistor network with 1500 ohm resistance, 2% tolerance, and 1.25 W power dissipation. Ideal for through-hole mounting applications requiring isolated networks with a temperature coefficient of 50 ppm/°C.
LT5400BIMS8E-4#PBF
Linear Technology
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; No. of Terminals: 8; No. of Elements: 1;
GQCALF013570BAT
Tt Electronics Plc
GQCALF013570BAT by Tt Electronics Plc is a 12-function resistor network with 357 ohm resistance, 0.1% tolerance, and 1W power dissipation. It is a thin film technology array suitable for surface mount applications in various electronic circuits requiring precise resistance values and high operating temperatures up to 125°C.
VSSR1603102JTF
Vishay Intertechnology's VSSR1603102JTF is a 8-function resistor network with 1000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values and compact design. Operating temperature range from -55 to 150 °C makes it suitable for various industrial and consumer electronic devices.
CAY16-105J4LF
Bourns CAY16-105J4LF is a 4-function resistor network with 1000000 ohm resistance, 5% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in electronics requiring isolated networks with operating voltage up to 50 V. Dimensions of 3.2mm x 1.6mm x 0.5mm make it suitable for compact designs in various electronic devices.
Y1747V0019QT0R
Vishay Precision Group
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Tolerance: .02 %;
4606X-AP1-203LF
Bourns 4606X-AP1-203LF resistor network features 5 elements with 20000 ohm resistance each. It has a power dissipation of 0.2 W and operates at temperatures from -55 to 125 °C. Ideal for through-hole mounting in applications requiring high precision and reliability.
EXBV8V103JV
The Panasonic EXBV8V103JV is a resistor network with 4 functions, each with 10000 ohm resistance. It has a power dissipation of 0.063 W and operates b/w -55 to 125 °C. Ideal for surface mount applications requiring isolated networks with 5% tolerance and operating voltage up to 50 V.
4816P-T01-220LF
Bourns 4816P-T01-220LF is a resistor network with 8 functions, isolated type, and 22 ohm resistance. It features a power dissipation of 0.16W, temperature coefficient tracking of 50 ppm/°C, and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
4310R-102-224
Bourns 4310R-102-224 resistor network has 10 terminals with 220k ohm resistance, suitable for applications requiring a 0.3 W power dissipation. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 125 °C and is ideal for through-hole mounting in various electronic circuits.
Y0006V0009VV0L
ARRAY/NETWORK RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 175 Cel; Tolerance: .005 %;
TC164-JR-0747KL
Yageo
Yageo's TC164-JR-0747KL resistor network features 4 functions with 47000 ohm resistance, 5% tolerance, and 155°C max operating temp. Ideal for AEC-Q200 compliant applications requiring a compact SMT package with isolated network type and surface mounting.
EXBV8V220JV
The Panasonic EXBV8V220JV is a resistor network with 4 functions, each with 22 ohm resistance. It has a power dissipation of 0.063W and operates b/w -55 to 125 °C. Ideal for SMT applications requiring isolated networks with 5% tolerance and operating voltage up to 50V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RM2012B103/203PBVW10
Thin Film Technology
RM2012B103/203PBVW10 by Thin Film Tech is a 0.1W resistor array with 2 functions, offering 10000 ohm and 20000 ohm resistances with 0.1% tolerance. Its thin film tech and 5 ppm/°C temp coef tracking make it ideal for precise applications in isolated networks requiring surface mounting.
RM2012B-103/203-PBVW10
Susumu
The Susumu RM2012B-103/203-PBVW10 is a thin film resistor array with 2 functions, 10000 ohm and 20000 ohm resistances. It has a tolerance of 0.1%, operates b/w -55 to 155 °C, and features temperature coefficient tracking of 5 ppm/°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
RM2012B-103/103-PBVW10
The Susumu RM2012B-103/103-PBVW10 is a thin film resistor network with 10000 ohm resistance, 0.1% tolerance, and 31.6228 V operating voltage. It is ideal for surface mount applications requiring precise resistance values in compact electronic devices. With a temperature coefficient of 25 ppm/°C, it ensures stable performance across a wide temperature range from -55 to 155 °C.
RM2012B103/103PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Tolerance: .1 %; Second or Last Element Resistance: 10000 ohm; Packing Method: TR;
RM2012B103/403PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Tolerance: .1 %; Network Type: ISOLATED; No. of Elements: 1;
RM2012B-103/403-PBVW10
The Susumu RM2012B-103/403-PBVW10 is a thin film resistor network with 1 element and 4 terminals. It has a power dissipation of 0.05 W and can operate at temperatures ranging from -55 to 155 °C. This resistor array is commonly used in surface mount applications requiring high precision resistance values.
RM2012B103/603PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Tolerance: .1 %; Shape (Package): RECTANGULAR PACKAGE; No. of Functions: 2;
RM2012B-103/603-PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 155 Cel; Tolerance: .1 %; Terminal Shape: WRAPAROUND;
RM2012B103/903PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Tolerance: .1 %; Terminal Shape: ONE SURFACE; Temperature Coef Tracking: 5 ppm/Cel;
RM2012B-103/903-PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 155 Cel; Tolerance: .1 %; Temperature Coef (ppm/Cel): 25;
RM2012B-103/503-PBVW10
RM2012B103/503PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Tolerance: .1 %; Temperature Coef (ppm/Cel): 25; No. of Functions: 2;
RM2012B103/303PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Tolerance: .1 %; Terminal Shape: ONE SURFACE; First Element Resistance: 10000 ohm;
RM2012B-103/303-PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 155 Cel; Tolerance: .1 %; No. of Elements: 1;
RM2012B102/103PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Tolerance: .1 %; Element Power Dissipation: .05 W; Terminal Shape: ONE SURFACE;
RM2012B-102/103-PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 155 Cel; Tolerance: .1 %; Terminal Finish: MATTE TIN;
RM2012A-103/603-PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 155 Cel; Tolerance: .1 %; Technology: THIN FILM;
RM2012A103/603PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Tolerance: .1 %; Second or Last Element Resistance: 60000 ohm; Packing Method: TR;
RM2012A-103/203-PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 155 Cel; Tolerance: .1 %; No. of Functions: 1;
RM2012A-103/403-PBVW10
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 155 Cel; Tolerance: .1 %; First Element Resistance: 10000 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved