Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VND7040AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. Operating at -40 to 125 °C, it has a supply voltage range of 4-28 V. Widely used in automotive applications due to its small size and fast turn-on/off times of 120/100 us.
Median Price
$2.400
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
DigiKey
1+ parts
$2.330
100+ parts
$1.410
1k+ parts
$1.292
10k+ parts
-
Element14
$2.390
Newark
$1.460
$1.270
Mouser Electronics
$2.420
$1.280
$1.210
Farnell
$2.510
$1.640
$1.170
Arrow
Verical
$0.793
RS (Exports)
$2.623
$2.357
Nova Conductors
$1.745
Digiode
$2.270
Vyrian
Semtec, LLC
TME
$1.240
Cogito LLC
Cyclops Electronics Ltd
Anansix
LIBRA Elektronik GmbH
Ampacity Inc.
$0.930
Semicontronic
$0.907
$0.902
Argo Parts USA
Bastille Electronics
$1.658
$1.575
$1.553
Corphita
$2.151
Continental Prestige Electronics
$2.660
$1.310
Aztec Data Supply Inc.
$5.820
Microchip USA
$9.915
IDEA Electronic Components Group
$10.523
$9.471
Corohmni
$14.540
MKK Technologies
$19.788
DigiPath Technology Company
Infinite Electronics LLP (Excess)
Lixinc
A-Z Elektronik GmbH
GreenTree Electronics
Kepictronics
Authorized Procurement Solutions
Parana Technologies
$12.582
This material provides durability and protects the internal components from external elements, making the product reliable for long-term use.
Allows for easy and secure installation on circuit boards, saving time and effort during assembly.
Can handle high voltage inputs, making it suitable for a wide range of applications that require higher power levels.
Provides comprehensive protection for both the peripheral driver and the connected devices, ensuring safe operation in various conditions.
The compact design and heat sink feature help optimize space utilization and maintain thermal performance, suitable for compact electronic applications.
Designed to withstand automotive environments, ensuring reliability in harsh conditions such as high temperatures and vibrations.
Compatible with typical voltage requirements, making it a versatile choice for various electronic systems.
Peripheral Drivers VND7040AJTR attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
VND7040AJTR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - VNYYY 11/Dec/2017
PCN Packaging - Mult Dev Label Chgs 29/Oct/2020 Material Barrier Bag 17/Dec/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Daco Semiconductor
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Plessey Semiconductors Discrete Components Div
Infinex
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
Cheng-yi Electronic
Crystalonics
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
Fagor Electronica S Coop
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
E-L9338MD/TR
STMicroelectronics
E-L9338MD/TR by STMicroelectronics is a peripheral driver with 4 functions, built-in protections for transient, over current, and thermal issues. It operates at supply voltages ranging from 4.5V to 32V and has a max output current of 0.3A. This small outline driver is ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
ISP742RIFUMA1
Infineon Technologies
ISP742RIFUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, operating at -30 to 85 °C. It offers built-in protections for over current, over voltage, and thermal issues. This small outline package has a max supply voltage of 34 V and sink output current flow direction, suitable for buffer or inverter-based interface IC applications.
VN5160STR-E
STMicroelectronics' VN5160STR-E is a peripheral driver with 8-36V power supplies, built-in protections, and 10us turn-on time. Ideal for applications requiring true output polarity, such as buffer or inverter-based interface ICs. Package style: small outline, terminal pitch: 1.27mm, and max supply current of 3.5mA make it versatile for various designs.
ULN2003AFWG
Toshiba's ULN2003AFWG is a 16-terminal peripheral driver with open-collector output, ideal for buffer or inverter-based applications. With a small outline package style and gull wing terminals, it offers standard input characteristics and inverted output polarity. This bipolar technology device features transient protection and sink current flow direction, making it suitable for various electronic designs.
L293DWP
Unitrode
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 28; Package Shape: RECTANGULAR; No. of Functions: 2; Built-in Protections: THERMAL;
VN800PSTR-E
STMicroelectronics' VN800PSTR-E is a peripheral driver with 8-36V power supplies, 0.7A max output current, and built-in protections. Ideal for automotive applications due to AEC-Q100 screening level and sink output current flow direction. Package style: small outline, terminal pitch: 1.27mm, and moisture sensitivity level of 3.
VNH5050ATR-E
VNH5050ATR-E by STMicroelectronics is a peripheral driver with 36 terminals, operating voltage range of 5.5-18 V. It offers built-in protections against transient, over current, over voltage, thermal and under voltage conditions. Ideal for applications requiring a half bridge based peripheral driver with sink output current flow direction.
XSN6507DGQR
XSN6507DGQR by Texas Instruments is a peripheral driver with a max supply voltage of 36V and nominal output peak current limit of 1.3A. It operates in temperatures ranging from -55°C to 125°C, making it suitable for various industrial applications requiring high-performance buffer or inverter-based interface ICs.
L293NE
L293NE by Texas Instruments is a peripheral driver with 2 functions, operating at 4.5-36V. It offers built-in transient and thermal protections, with a max output current of 2A. Ideal for applications requiring true output polarity control in commercial temperature environments.
BTS428L2
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE; Qualification: Not Qualified;
ITS428L2XT
ITS428L2XT by Infineon Technologies is a peripheral driver with a max supply voltage of 43V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline package is suitable for applications requiring buffer or inverter based interface ICs with a nominal output peak current limit of 1.8A.
ULN2004ADRG3
ULN2004ADRG3 by Texas Instruments is a 7-function peripheral driver with built-in transient protection. It operates b/w -20 to 70°C, with a max supply voltage of 8V and current of 1.35mA. Ideal for applications requiring buffer or inverter-based interface ICs in compact spaces due to its small outline package style.
TLE6220GP
TLE6220GP by Infineon is a 20-terminal MOS driver with built-in protections for transient, over current, and over voltage. Operating at 5V with a max output current of 3A, it's ideal for automotive applications due to its AEC-Q100 screening level and small outline package style. With a turn-on/off time of 10us and sink output flow direction, it offers reliable performance in harsh environments.
LMD18201T/NOPB
LMD18201T/NOPB by Texas Instruments is a BCDMOS peripheral driver with PWM, offering 6A output current and 55V max supply voltage. Ideal for automotive applications, it features built-in protections against transient, over current, thermal, and under voltage conditions. With a temperature range of -40 to 125 °C, this rectangular package with flange mount style has 11 terminals in zig-zag position.
E-TDE1707BFP
E-TDE1707BFP by STMicroelectronics is a Peripheral Driver with 8 terminals, operating voltage range of 6-48V, and built-in protections against transient, over current, and thermal issues. It is a small outline package suitable for commercial extended temperature applications requiring buffer or inverter based peripheral drivers with source and sink output current flow direction.
TPS27S100APWPR
TPS27S100APWPR by Texas Instruments is a peripheral driver with a max supply voltage of 40V and built-in protections for transient, over current, thermal, and under voltage. It has 14 terminals in a small outline package style suitable for automotive applications. The device offers a nominal output peak current limit of 7A with sink flow direction.
VN5025AJTR-E
VN5025AJTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This IC type interface driver has a turn-on time of 30us and is commonly used in buffer or inverter based applications.
MIC94090YC6-TR
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
BSP752TXUMA1
BSP752TXUMA1 by Infineon is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 85 °C with a supply voltage range of 6-52 V. This MOS technology-based driver has a nominal output peak current limit of 1.7 A and is ideal for industrial applications requiring sink output flow direction.
IRS21844STRPBF
International Rectifier
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VND7NV04TR-E
VND7NV04TR-E by STMicroelectronics is a Peripheral Driver with built-in protections for transient, over current, over voltage, and thermal issues. It has a max output peak current limit of 9A and turn-on time of 2.3µs. Ideal for applications requiring buffer or inverter based peripheral drivers in compact spaces.
VND7020AJTR
VND7020AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 4-28 V. Ideal for automotive applications due to its compact size and sink output current flow direction.
VND7020AJTR-E
VND7020AJTR-E by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120us. This rectangular package is ideal for applications requiring sink output current flow direction in a compact form factor.
VND7050AJTR
VND7050AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w 4-28 V, has turn-on/off times of 120/100 us, and is ideal for interface IC applications requiring sink output current flow direction.
VND7050AJTR-E
VND7050AJTR-E by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w 4-28 V with turn-on/off times of 120/100 us. Ideal for applications requiring sink output current flow direction in a compact rectangular package.
VND7140AJ12TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
VND7050AJ12TR
VND7050AJ-E
VND7050AJ-E by STMicroelectronics is a peripheral driver with a max supply voltage of 28V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. This small outline IC is commonly used as a buffer or inverter based peripheral driver.
VND7020AJ-E
VND7020AJ-E by STMicroelectronics is a peripheral driver with a max supply voltage of 28V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline driver is commonly used as a buffer or inverter based peripheral driver in various applications.
VND7140AJTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; No. of Functions: 1;
VND7NV04-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Shape: RECTANGULAR; Output Current Flow Direction: SINK; Terminal Position: SINGLE;
VND7NV0413TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 3;
VND7030AJTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HLSSOP; Package Shape: RECTANGULAR;
VND7004AYTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): NOT SPECIFIED;
VND7140AJTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
VND7NV04-1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Code: SIP; Package Shape: RECTANGULAR; Output Current Flow Direction: SINK;
VND7040AJTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HLSSOP; Package Shape: RECTANGULAR; Length: 4.9 mm;
VND7030AJ-E
VND7012AYTR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved