Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VN750S-E by STMicroelectronics is a versatile peripheral driver with a max supply voltage of 36V and supports output currents up to 2A. It features built-in protections against overcurrent, overvoltage, and thermal issues. Ideal for automotive and industrial applications, it ensures reliable performance in compact designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Chip Stock
Digiode
Anansix
ACDS - Activité Composants Distribution Service
Sensible Micro Corp
AZTECH Wire
$3.910
$3.760
$3.680
$3.610
IDEA Electronic Components Group
$7.112
$6.400
Microchip USA
$10.342
MKK Technologies
$13.373
DigiPath Technology Company
Ampacity Inc.
$26.500
Kepictronics
Corphita
Perfect Parts
Parana Technologies
$8.503
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
The PLASTIC/EPOXY material ensures durability and resistance to environmental factors, making the product reliable for various applications.
Surface mount design allows for easier integration into compact circuits, saving space and enabling high-density designs.
With a maximum supply voltage of 36 V, this driver can be used in a wide range of applications, supporting robust and high-voltage systems.
The rectangular package shape is designed for efficient layout and integration in printed circuit boards.
Comprehensive built-in protections ensure the product can handle various fault conditions, enhancing reliability and safety in operation.
A flexible power supply range of 8 to 36 V makes this device suitable for a variety of applications, accommodating different system requirements.
Having 8 terminals provides multiple connection options for enhanced functionality and ease of integration into existing systems.
The small outline package style facilitates space-saving designs and is ideal for miniaturized electronic devices.
A minimum supply voltage of 5.5 V allows for low-power applications, contributing to energy efficiency in designs.
The high-quality nickel palladium gold terminal finish ensures excellent conductivity and resistance to corrosion, promoting long-lasting performance.
Dual terminal positions allow for versatile layout options, enhancing design flexibility in circuit configurations.
A low seated height of 1.75 mm is suitable for applications requiring minimal height profiles, making it perfect for thin devices.
The compact width of 3.9 mm makes it easy to fit into space-constrained PCB layouts.
The short length of 4.9 mm further contributes to the small footprint of the device, ideal for compact electronic assemblies.
With a maximum output current of 2 A, this driver can effectively handle demanding peripheral devices, providing robust performance.
The gull wing terminal form allows for easier soldering and provides solid mechanical support, enhancing reliability in PCBs.
A nominal supply voltage of 13 V is optimal for many standard applications, enabling efficient operation across various devices.
A terminal pitch of 1.27 mm strikes a balance between compactness and ease of handling during assembly and soldering.
The ability to handle a nominal output peak current limit of 9 A makes this driver suitable for high-demand applications where temporary surges are common.
Being a buffer or inverter-based peripheral driver expands its usability in various logic level applications, providing versatility.
The sink output current flow direction is effective for interfacing with various load types, making this driver versatile for multiple applications.
Peripheral Drivers VN750S-E attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Maximum Output Current:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
VN750S-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
IRS2181SPBF
Infineon Technologies
IRS2181SPBF by Infineon Technologies is a peripheral driver with 8 terminals and built-in transient & under voltage protections. It operates b/w -40 to 125 °C, with a supply voltage range of 10-20 V. Ideal for automotive applications due to its small outline package style and CMOS technology.
BTS133BKSA1
BTS133BKSA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for over current, over voltage, and thermal issues. It has a nominal output peak current limit of 28A and a turn-on time of 100µs. This rectangular package style device is ideal for applications requiring sink output current flow direction in automotive systems.
TPS22965NDSGR
TPS22965NDSGR by Texas Instruments is a peripheral driver with max supply voltage of 5.7V, min supply voltage of 2.5V, and operating temp range from -40 to 105°C. It is used as an interface IC type buffer or inverter based peripheral driver for industrial applications.
SN754410NE
SN754410NE by Texas Instruments is a 16-terminal peripheral driver with built-in transient and thermal protections. It operates b/w -40 to 85°C, supports a max output current of 1A, and has a turn-on time of 0.4us. Ideal for industrial applications requiring true output polarity control in a compact package style.
TPS22964CYZPR
TPS22964CYZPR by Texas Instruments is a 6-terminal peripheral driver with built-in transient protection. It features a very thin profile, fine pitch grid array package style and operates in industrial temperature range (-40 to 85°C). Ideal for applications requiring sink output current flow direction.
FSFR2100XSL
FSFR2100XSL by Onsemi is a half bridge based peripheral driver with 9 terminals in a rectangular package. It offers over current, over voltage, and thermal protections. Ideal for applications requiring source and sink output current flow direction control.
BTS443PXT
BTS443PXT by Infineon is a MOS peripheral driver with 36V max supply voltage, 7.6A output peak current limit, and built-in protections. It is used for buffer or inverter-based interface ICs in applications requiring sink output current flow direction and fast turn-on/off times.
BTT60101ERAXUMA1
BTT60101ERAXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 28V and has a max supply voltage of 36V. With a turn-on time of 150us, it is commonly used in automotive applications due to its AEC-Q100 screening level.
L293DDWP
Unitrode
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 28; Package Shape: RECTANGULAR; Terminal Position: DUAL; Nominal Output Peak Current Limit: 1.2 A;
DS2482S-100+
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MIC5801YWM
Rochester Electronics
LATCH BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
MIC5891YWM
Micrel
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
TPIC6B595DW
TPIC6B595DW by Texas Instruments is an 8-bit register-based peripheral driver with sink output current flow direction. It operates b/w -40 to 125 °C and has a max supply voltage of 5.5 V, making it suitable for automotive applications requiring transient protection and standard input characteristics.
DS2482S-800+
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
VNI4140KTR
STMicroelectronics
VNI4140KTR by STMicroelectronics is a 24V peripheral driver with 4 functions. It offers built-in protections for transient, over current, thermal, and under voltage. With a max supply voltage of 36V, it is ideal for applications requiring sink output current flow direction in a small outline package.
TPS1H100BQPWPRQ1
TPS1H100BQPWPRQ1 by Texas Instruments is a high side driver with built-in protections for transient, over current, thermal, and under voltage. It operates at a max supply voltage of 40V and has a nominal output peak current limit of 7A. Ideal for automotive applications due to its AEC-Q100 screening level and compact rectangular package design.
MIC2026-1YM
BTS50302EKAXUMA1
BTS50302EKAXUMA1 by Infineon Technologies is a peripheral driver with 14 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 5V to 28V and has a turn-on/off time of 230us. Ideal for automotive applications due to AEC-Q100 screening level and compact rectangular package design.
EL7156CSZ-T7
Intersil
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS2482S-800/T&R
DS2482S-800/T&R by Maxim Integrated is a peripheral driver with 8 functions, operating voltage range of 2.9V to 5.5V, and industrial temperature grade (-40°C to 85°C). It is used for buffer or inverter-based interface IC applications requiring a small outline package style and source current flow direction.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VN750PSTR-E
STMicroelectronics' VN750PSTR-E is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. Ideal for applications requiring true output polarity and source flow direction in compact designs.
VN750PTTR-E
VN750PTTR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
VN751PT13TR
VN751PT13TR by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in transient protections. It operates in automotive applications, offering a nominal output peak current limit of 2.5A. With a small outline package style and gull wing terminal form, it is suitable for surface mount installations in various electronic systems.
VN750PT-E
STMicroelectronics' VN750PT-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
VN751STR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
VN750PS-E
VN750PS-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. This small outline package is ideal for applications requiring source output current flow direction and quick turn-on/off times.
VN750B5TR-E
STMicroelectronics' VN750B5TR-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 36V and can handle a max output current of 2A. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
VN751PT
VN751PT by STMicroelectronics is a Peripheral Driver with 5 terminals, operating voltage range of 5.5V to 36V, and built-in transient protection. It has a small outline package style suitable for automotive applications, with a max temperature of 125°C. The device offers a nominal output peak current limit of 2.5A and operates as a buffer or inverter-based peripheral driver with source flow direction.
VN750SMPTR-E
STMicroelectronics' VN750SMPTR-E is a peripheral driver with 8-36V power supplies, 2A max output current, and built-in protections. Ideal for applications requiring source flow direction, it features a small outline package style and turn-on/off times of 40/30us.
VN750B5-E
STMicroelectronics' VN750B5-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 36V and has a max output current of 2A. Ideal for applications requiring sink output current flow direction in compact spaces.
VN751S
STMicroelectronics' VN751S is a peripheral driver with 8-36V power supplies, built-in transient protection, and 2.7A output current limit. Ideal for automotive applications, it operates b/w -40 to 125°C and features a small outline package with gull wing terminals.
VN750PT13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; Output Current Flow Direction: SINK;
VN750PT
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; Package Equivalence Code: SMSIP4/5H,.37,50TB;
VN750PEP-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
VN750
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Maximum Output Current: 2 A;
VN750SMTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G8;
VN750S
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 9 A;
VN750-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 9 A;
VN750-B5
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
VN750PEP
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved