Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VN5E050MJTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 28V and built-in protections for transient, overvoltage, thermal, and undervoltage. It has a max output current of 4A and is ideal for applications requiring buffer or inverter-based peripheral drivers with a nominal voltage of 13V.
Median Price
$2.645
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
DigiKey
1+ parts
$2.490
100+ parts
$1.688
1k+ parts
-
10k+ parts
Newark
$3.090
$2.290
$1.640
Element14
$2.800
$1.920
$1.760
Farnell
$1.010
Nova Conductors
$1.539
Digiode
$2.574
Chip Stock
Vyrian
Cyclops Electronics Ltd
Anansix
Bristol Electronics
Atlantic Semiconductor
QIE Inc.
Ampacity Inc.
$0.790
Semicontronic
$0.770
$0.766
Argo Parts USA
$1.426
Continental Prestige Electronics
$1.397
Bastille Electronics
$1.462
$1.389
$1.370
Corphita
$2.439
IDEA Electronic Components Group
$7.966
$7.170
Microchip USA
$8.857
Aztec Data Supply Inc.
$11.690
Corohmni
$14.475
MKK Technologies
$14.980
DigiPath Technology Company
Lixinc
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Kepictronics
Futuretech Components
Perfect Parts
A-Z Elektronik GmbH
S.R.D Solutions
Parana Technologies
$9.525
Authorized Procurement Solutions
Provides durability and protection for the internal components, ensuring a longer lifespan for the product.
Enhanced safety features protect the peripheral driver and connected devices from potential damage due to power fluctuations or overheating.
Capable of delivering sufficient power to drive peripherals effectively without overloading the system.
Handles peak current demands with ease, ensuring reliable performance under varying load conditions.
Peripheral Drivers VN5E050MJTR-E attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Maximum Output Current:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
VN5E050MJTR-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev Assembly Chg 18/Oct/2019
PCN Packaging - Material Barrier Bag 17/Dec/2020 Mult Dev Label Chgs 29/Oct/2020
PCN Other - APG-ABD/14/8764 13/Nov/2014
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
1552200253
Molex
WIRE AND CABLE;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Fairchild Semiconductor
EU2B-YS3103F
Idec
ROTARY SWITCH;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
Philips Components
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
FDC6330L_NL
FDC6330L_NL by Fairchild Semiconductor is a CMOS peripheral driver with 6 terminals, 2.3A output current, and built-in transient protection. It operates in temperatures ranging from -55 to 150°C and is ideal for military-grade applications requiring a low-profile, small outline package with source current flow direction.
BTT60101ERAXUMA1
BTT60101ERAXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 28V and has a max supply voltage of 36V. With a turn-on time of 150us, it is commonly used in automotive applications due to its AEC-Q100 screening level.
BSP742RIXUMA1
BSP742RIXUMA1 by Infineon Technologies is a MOS technology-based peripheral driver with 8 terminals. It offers built-in protections for transient, over current, and over voltage scenarios. With a max supply voltage of 34V, it is suitable for applications requiring sink output current flow direction and a nominal output peak current limit of 1.2A.
IRS21864STRPBF
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
BTS3028SDLATMA1
BTS3028SDLATMA1 by Infineon is a peripheral driver with 36V max supply voltage, built-in protections, and 5.8A nominal output peak current limit. Ideal for industrial applications requiring sink output current flow direction and fast turn-on/off times of 120us/200us. Package style is small outline with gull wing terminals for surface mount assembly.
IRS21844MTRPBF
IRS21844MTRPBF by Infineon is a peripheral driver with 20V max supply voltage, 15V power supplies, and -40 to 125°C operating temp. Ideal for automotive applications, it features built-in transient protection, 0.9us turn-on time, and 2.3A output current limit for half-bridge based systems.
L293DN
Unitrode
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Shape: RECTANGULAR; Maximum Supply Voltage: 36 V; Output Current Flow Direction: SOURCE AND SINK;
FSFR2100XS
FSFR2100XS by Onsemi is a half bridge peripheral driver with 9 terminals in a rectangular package. It offers over current, over voltage, thermal, and under voltage protection. Ideal for applications requiring source and sink output current flow control.
ULN2004AD16-U
Diodes Incorporated
ULN2004AD16-U by Diodes Inc. is a peripheral driver with 7 bits, open-collector output characteristics, and a max supply voltage of 13V. It is commonly used as a buffer or inverter based peripheral driver in various applications.
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
VND5050AKTR-E
STMicroelectronics
VND5050AKTR-E by STMicroelectronics is a 24-terminal peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates on power supplies ranging from 8V to 36V and has a max supply voltage of 36V. This rectangular package with gull wing terminals is ideal for buffer or inverter-based interface IC applications.
LTC4376HDHD#TRPBF
Analog Devices
LTC4376HDHD#TRPBF by Analog Devices is a 16-terminal peripheral driver with built-in transient protection. It operates b/w -40 to 125 °C, with a supply voltage range of 4-40 V. Ideal for automotive applications, it features a small outline package and 0.5 mm terminal pitch for efficient performance.
EL7156CSZ-T7
Renesas Electronics
EL7156CSZ-T7 by Renesas Electronics is a full bridge peripheral driver with 3.5A output current limit, suitable for industrial applications. It operates b/w -40 to 85°C, with a supply voltage range of 4.5-16.5V. This small outline package has dual terminals and matte tin finish, making it ideal for surface mount designs.
BTS428L2ATMA1
BTS428L2ATMA1 by Infineon is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 12V with a max of 41V. With a turn-on/off time of 200us, it's ideal for applications requiring a sink output current flow direction in small outline packages.
NCV8460ADR2G
NCV8460ADR2G by Onsemi is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 6V to 36V and has a nominal output peak current limit of 9A. This buffer or inverter based driver is commonly used in automotive applications due to its AEC-Q100 screening level.
LM3525MX-H/NOPB
LM3525MX-H/NOPB by Texas Instruments is a peripheral driver with 8 terminals, operating voltage range of 2.7V to 5.5V, and built-in protections for transient, over current, thermal, and under voltage. It has an output current limit of 1A and is ideal for automotive applications due to its temperature grade.
BTS432E2E3043
BTS432E2E3043 by Infineon is a MOS technology peripheral driver with 5 terminals and built-in protections. It operates at supply voltages ranging from 4.5V to 42V, offering a nominal output peak current limit of 44A. This rectangular package is ideal for applications requiring source output current flow direction and fast turn-on/off times.
BSP742R
BSP742R by Infineon Technologies is a Peripheral Driver with 8 terminals, MOS technology, and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages of 5-34 V and has a turn-on time of 140 us. Ideal for automotive applications requiring buffer or inverter based peripheral drivers.
L6202
STMicroelectronics L6202 is a full bridge peripheral driver with 18 terminals, operating voltage range of 12-48V. It features built-in thermal protection and supports up to 5A output current flow in source and sink direction. Ideal for applications requiring true output polarity control and standard input characteristics.
VNB35NV04-E
STMicroelectronics VNB35NV04-E is a peripheral driver with built-in protections for transient, over current, and over voltage. It has 2 terminals in a small outline package style with gull wing terminal form. Operating at 5V nominal voltage, it is ideal for buffer or inverter based applications requiring sink output current flow direction.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VN5E160STR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Driver No. of Bits: 1;
VN5E160MSTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 4.5 V;
VN5E006ASPTR-E
STMicroelectronics' VN5E006ASPTR-E is a peripheral driver with 10 terminals, operating voltage range of 4.5-28V, and built-in protections against various faults. It comes in a small outline package suitable for surface mount applications. Ideal for buffering or inverting signals with a peak output current limit of 90A.
VN5E160ASTR-E
VN5E160ASTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 28V and a max output current of 1A. It is commonly used as a buffer or inverter based peripheral driver for various applications.
VN5E050AJTR-E
STMicroelectronics' VN5E050AJTR-E is a CMOS technology-based peripheral driver with 12 terminals and built-in protections for transient, over voltage, thermal, and under voltage. It operates within a supply voltage range of 4.5V to 28V, delivering a max output current of 4A in sink direction. This rectangular package is designed for applications requiring buffer or inverter based interface ICs.
VN5E025AJTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
VN5E050JTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HLSSOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 4.5 V;
VN5E010MHTR-E
VN5E010MHTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 28V and a max output current of 6A. It is used as a buffer or inverter based peripheral driver for applications requiring transient, over current, over voltage, thermal, and under voltage protections.
VN5E010MH-E
STMicroelectronics' VN5E010MH-E is a peripheral driver with 6A output current, 28V max supply voltage, and built-in protections. It is used in applications requiring buffer or inverter-based interface ICs for controlling high-current loads efficiently.
VN5E025MJTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
VN5E160S-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Width: 3.9 mm;
VN5E016MHTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
VN5E050ASO-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): NOT SPECIFIED;
VN5E050ASOTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
VN5E025AJ-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HLSSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): NOT SPECIFIED;
VN5E050J-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HLSSOP; Package Shape: RECTANGULAR; Maximum Output Current: 2 A;
VN5E016AFH-E
VN5E025ASO-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
VN5E025ASOTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved