Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics VIPER100(022Y) is a current-mode switching regulator with 5 terminals, operating at 200 kHz. It offers a max output current of 5.3A and nominal input voltage of 13V, suitable for applications requiring efficient power conversion in various electronic devices.
Median Price
$1.673
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Vyrian
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Microfarads
Bristol Electronics
Microchip USA
$5.431
IDEA Electronic Components Group
$10.461
$9.415
AZTECH Wire
$14.750
MKK Technologies
$19.672
DigiPath Technology Company
Component Stockers USA
$99.990
Authorized Procurement Solutions
Parana Technologies
$12.508
Corphita
Plastic/Epoxy material provides good insulation and thermal conductivity, making the product durable and reliable.
Rectangular shape allows for easy mounting and installation in various electronic devices.
Having 5 terminals provides flexibility in connection options and allows for multiple configurations.
Current-mode control provides better transient response and improved stability in varying load conditions.
Matte Tin finish offers good solderability and corrosion resistance, ensuring a secure and long-lasting connection.
High maximum output current allows for powering multiple components or higher power devices efficiently.
MOS technology offers high efficiency and low power consumption, making the product energy-efficient.
PWM control technique provides precise regulation of output voltage and efficient power conversion.
Single switcher configuration simplifies the design and reduces component count, leading to a more compact and cost-effective product.
Switching Regulators & Controllers VIPER100(022Y) attributes and parameters. Explore more Switching Regulators & Controllers devices from STMicroelectronics
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Terminals:
Maximum Output Current:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Sub-Category:
Maximum Supply Current (Isup):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
VIPER100(022Y) Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
EU2B-YS3303C
Idec
ROTARY SWITCH;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
Bytesonic Electronics
LMZ23603TZ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Peak Reflow Temperature (C): 245; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: SINGLE;
CHL8316CRT
Infineon Technologies
Switching Regulator or Controllers;
AP3012KTR-G1
Bcd Semiconductor Manufacturing
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS62130RGTRF0
Texas Instruments
TPS62130RGTRF0 by Texas Instruments is a switching regulator with 16 terminals, operating b/w -40 to 85°C. It features a buck switcher configuration, PWM control technique, and can handle input voltages from 3V to 17V. Ideal for industrial applications requiring high efficiency and compact design with a max switching frequency of 2500 kHz.
AOZ1282CI-2
Alpha & Omega Semiconductor
SWITCHING REGULATOR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
AP63205WU-7
Diodes Incorporated
SWITCHING REGULATOR; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
LM3578AMX/NOPB
LM3578AMX/NOPB by Texas Instruments is a switching regulator with 0-1V output voltage range, 2-40V input voltage range, and 100kHz max switching frequency. Ideal for applications requiring current-mode control technique in small outline packages.
TL494IN
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
PLMR51420XDDCT
PLMR51420XDDCT by Texas Instruments is a switching regulator with 2A output current, 1100 kHz max frequency, and 34.2V max output voltage. Ideal for applications requiring efficient power conversion in compact spaces.
LMZM23600V5SILT
LMZM23600V5SILT by Texas Instruments is a switching regulator with a max output current of 0.5A and a control technique of pulse width modulation. It operates in an automotive temperature grade range from -40°C to 125°C, making it suitable for various automotive applications requiring stable power supply solutions. With a compact rectangular package style and surface-mount design, this IC offers efficient buck-boost switching configurations for voltage regulation in tight spaces.
LMZ14201TZ-ADJ/NOPB
LMZ14201TZ-ADJ/NOPB by Texas Instruments is a switching regulator with 1A output current, 6V max output voltage, and 1000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact design.
LM5575QMHX/NOPB
LM5575QMHX/NOPB by Texas Instruments is a 16-terminal switching regulator with a max output voltage of 70V and max current of 2.5A. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring pulse width modulation control mode at a max frequency of 500kHz.
LM5008MMX/NOPB
LM5008MMX/NOPB by Texas Instruments is a switching regulator with a max output voltage of 75V and max output current of 0.61A. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring hysteric current mode control technique and buck switcher configuration.
LTC3646EMSE#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Analog Devices
LTC3646EMSE#PBF by Analog Devices is a current-mode switching regulator with 16 terminals, operating b/w -40 to 85°C. It has a buck switcher configuration, accepting input voltages from 4-40V and providing a stable output of 5V. This compact device in small outline package is ideal for industrial applications requiring efficient power management.
LT8608EMSE#PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE; Surface Mount: YES;
FAN5331SX
FAN5331SX by Onsemi is a small outline, low profile switching regulator with 5 terminals. It operates b/w -40 to 85°C and supports input voltage range of 2.7-5.5V. With a max output current of 1A and PWM control technique, it's ideal for boost applications in industrial settings.
LTC3646IDE#PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
UCC28C43DGK
UCC28C43DGK by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power management applications. With a small outline package style and surface-mount capability, this IC is ideal for compact designs requiring efficient pulse width modulation control.
LMZ14202HTZX/NOPB
LMZ14202HTZX/NOPB by Texas Instruments is a switching regulator with 2A output current, 5-24V output voltage range, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact size of 10.16mm x 9.85mm x 4.82mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VIPER013HS
STMicroelectronics
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Additional Features: PFM CONTROL TECHNIQUE ALSO AVAILABLE;
VIPER013LSTR
VIPER013LSTR by STMicroelectronics is a current-mode switching regulator with a buck-boost switcher config. It operates b/w -40 to 125°C, with input voltage ranging from 4.5V to 30V and a max switching frequency of 132 kHz. Ideal for applications requiring efficient power management in compact spaces.
VIPER06HSTR
VIPER06HSTR by STMicroelectronics is a switching regulator with a small outline, shrink pitch package. It operates in current-mode control and has a max switching frequency of 127 kHz. This IC is commonly used in applications requiring buck switcher configuration and a nominal input voltage of 14 V.
VIPER06LSTR
VIPER06LSTR by STMicroelectronics is a current-mode switching regulator with 1 function, operating at 66 kHz. It has a buck switcher configuration and supports PWM control technique. Ideal for applications requiring compact design and efficient power management in the voltage range of 11.5V to 23.5V.
VIPER12ASTR-E
VIPER12ASTR-E by STMicroelectronics is a switching regulator with 8 terminals, operating at a max output current of 0.48A and a switching frequency of 66kHz. It features pulse width modulation control technique and is suitable for applications requiring a nominal input voltage of 18V, such as power supplies in compact electronic devices.
VIPER06XN
STMicroelectronics' VIPER06XN is a 7-terminal switching regulator with current-mode control and PWM technique. It operates b/w 11.5-23.5V, with a max frequency of 33kHz in buck configuration. Ideal for applications requiring compact design and efficient power management in various electronic devices.
VIPER06LS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G10;
VIPER06HS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
VIPER16LDTR
VIPER16LDTR by STMicroelectronics is a 16-terminal switching regulator with current-mode control and pulse width modulation. It operates at a max switching frequency of 66 kHz, suitable for buck configuration applications. The small outline package makes it ideal for compact designs in various electronic devices.
VIPER22ADIP-E
STMicroelectronics' VIPER22ADIP-E is a switching controller with 8 terminals in an inline package. It operates at a max frequency of 66 kHz and supports a max output current of 0.84 A. Ideal for applications requiring pulse width modulation control technique and single switcher configuration within input voltage range of 9-38 V.
VIPER22ASTR-E
STMicroelectronics VIPER22ASTR-E is a switching controller with 8 terminals, 66 kHz max frequency, and 0.84 A output current. Ideal for applications requiring pulse width modulation control technique in compact designs. Features small outline package style and nickel/palladium/gold terminal finish for efficient performance.
VIPER06XSTR
VIPER06XSTR by STMicroelectronics is a switching regulator with a small outline, shrink pitch package style. It operates in current-mode control and has a max switching frequency of 33 kHz. With a nominal input voltage range of 11.5 V to 23.5 V, it is suitable for various applications requiring efficient power conversion.
VIPER12ADIP-E
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Qualification: Not Qualified;
VIPER12AS-E
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: .48 A;
VIPER265KDTR
VIPER265KDTR by STMicroelectronics is a switching regulator with 16 terminals, operating temperature range of -40 to 125°C, and max output current of 0.53A. It utilizes pulse width modulation control technique in a buck switcher configuration for applications requiring efficient power conversion in compact spaces.
VIPER011XS
VIPER011XS by STMicroelectronics is a switching regulator with a max operating temperature of 125°C and a min operating temperature of -40°C. It has a small outline, shrink pitch package style and can handle input voltages ranging from 4.5V to 30V. This regulator is commonly used in applications that require pulse width modulation control and buck-boost configuration.
VIPER06XS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 33 kHz;
VIPER22ADIP
VIPER22ADIP by STMicroelectronics is a switching regulator with 8 terminals in an in-line package. It operates at a max frequency of 66 kHz and can handle up to 0.84 A output current. Ideal for applications requiring pulse width modulation control, such as power supplies and voltage converters.
VIPER267KDTR
VIPER267KDTR by STMicroelectronics is a switching regulator with 16 terminals, operating b/w -40 to 125°C. It features a max output current of 0.74A and supports pulse width modulation control technique at a frequency of up to 66kHz. Ideal for applications requiring efficient power conversion in compact spaces.
VIPER22AS-E
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved