Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STP11N65M5 by STMicroelectronics is a N-CHANNEL FET with 650V DS breakdown voltage, 36A IDM, and 0.48 ohm RDS(on). Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 85W. The transistor has a temp range of -55 to 150 °C and comes in a rectangular package with through-hole terminals.
Median Price
$1.430
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Farnell
1+ parts
$1.170
100+ parts
$0.846
1k+ parts
$0.700
10k+ parts
-
Element14
$1.270
$1.230
$1.210
Newark
$2.760
$1.220
$0.896
$0.773
Avnet
Digiode
$1.102
Cyclops Electronics Ltd
Vyrian
Anansix
R&J Components
IDEA Electronic Components Group
$0.899
$0.809
Corphita
$1.044
MKK Technologies
$1.690
DigiPath Technology Company
Continental Prestige Electronics
$2.050
$1.300
$0.886
Ampacity Inc.
$2.590
Microchip USA
$13.455
Kepictronics
Epart123
$0.560
iodParts Technologies Inc.
GreenTree Electronics
A-Z Elektronik GmbH
Authorized Procurement Solutions
Alle Elektronik GmbH
Perfect Parts
Eastek
Parana Technologies
$1.075
This material provides good protection and insulation for the transistor, making it durable and reliable in various operating conditions.
N-Channel transistors typically have faster switching speeds and lower on-resistance compared to P-Channel transistors, making them more efficient.
The built-in diode helps in inductive load applications, providing protection against back EMF and reducing the need for additional components.
Designed specifically for switching applications, this transistor is optimized for fast turn-on and turn-off times, making it ideal for high-speed circuits.
With a high breakdown voltage, this transistor can handle high voltage loads, making it suitable for power electronics applications.
The high power dissipation rating allows this transistor to handle large amounts of power without overheating, ensuring reliable performance.
With a high operating temperature range, this transistor can be used in a wide variety of environments without the risk of thermal shutdown.
Power Field Effect Transistors (FET) STP11N65M5 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from STMicroelectronics
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
STP11N65M5 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Mult Dev Adv Material Notice 8/Apr/2019 Datasheet Rev 09/Feb/2022
PCN Assembly/Origin - New Molding Compound 13/Sep/2019
PCN Packaging - Traceability 06/Mar/2017
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Hitano Enterprise
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Formosa Microsemi
LL4148
Semtech Electronics
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSC093N15NS5ATMA1
Infineon Technologies
Infineon BSC093N15NS5ATMA1 is a N-CHANNEL FET with 150V DS breakdown voltage, 0.0093 ohm RDS(on), and 348A IDM. Ideal for switching applications due to its built-in diode, it operates in enhancement mode and has an EAS of 130mJ. The transistor's small outline package makes it suitable for surface mount designs.
JANTX2N6796
JANTX2N6796 by Infineon Technologies is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 32A IDM, 75mJ EAS, and 0.195 ohm RDS(on). Operating from -55 to 150 °C, it has a max power dissipation of 25W in a CYLINDRICAL package.
IRFS4010TRLPBF
IRFS4010TRLPBF by Infineon is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 180A Drain Current. It is used for SWITCHING applications, operates in ENHANCEMENT MODE, and has a max power dissipation of 375W.
SI7252DP-T1-GE3
Vishay Intertechnology
Vishay Intertechnology's SI7252DP-T1-GE3 is a N-channel Power FET with 100V DS breakdown voltage, ideal for switching applications. Featuring separate elements with built-in diode, it has 80A max pulsed drain current and 0.017 ohm max drain-source resistance. Its small outline package and matte tin finish make it suitable for surface mount designs.
BSS123
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (ID): .17 A; Operating Mode: ENHANCEMENT MODE;
AUIRF3205ZSTRL
AUIRF3205ZSTRL by Infineon is a N-CHANNEL FET with 55V DS Breakdown Voltage, 440A IDM, and 0.0065 ohm RDS(on). Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE at up to 175°C, making it suitable for high-power tasks.
CSD18540Q5BT
CSD18540Q5BT by Texas Instruments is a N-CHANNEL FET for SWITCHING applications. It has a 60V DS Breakdown Voltage, 400A IDM, and 0.0033 ohm Drain-Source On Resistance. Operating in ENHANCEMENT MODE, it can handle temperatures from -55 to 175 °C.
IRFR4620TRLPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 144 W; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
FDMS86101
Onsemi
FDMS86101 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 200A IDM. Ideal for SWITCHING applications, it features a built-in diode, 0.008 ohm RDS(on), and 135mJ EAS rating. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 104W in a small outline package.
FQD11P06TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 38 W; Package Body Material: PLASTIC/EPOXY; Maximum Time At Peak Reflow Temperature (s): 30;
SI7439DP-T1-E3
Vishay Intertechnology's SI7439DP-T1-E3 is a P-CHANNEL FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 50A IDM, 80mJ EAS, and 0.09 ohm Drain-Source On Resistance. Operating at up to 150°C, it has a small outline package style for efficient heat dissipation.
DMP6023LE-13
DMP6023LE-13 by Diodes Inc. is a P-channel FET with 60V DS breakdown voltage and 50A IDM for switching applications. It operates in enhancement mode, has a max temp of 150°C, and features a drain-source resistance of 0.028 ohm. Ideal for automotive use due to AEC-Q101 standard compliance.
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
AUIRFZ44NS
AUIRFZ44NS by Infineon is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 160A IDM, 150mJ EAS, and 0.0175 ohm RDS(ON). With a max power dissipation of 94W and operating temperature up to 175°C, it's suitable for high-power circuits.
SI7489DP-T1-E3
Vishay Intertechnology's SI7489DP-T1-E3 is a P-CHANNEL FET with 100V DS Breakdown Voltage, 40A IDM, and 83W Power Dissipation. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with -55 to 150 °C temperature range.
IRF530A
The Onsemi IRF530A is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 14A Max ID. Ideal for SWITCHING applications, it features a 0.11 ohm Drain-Source Resistance and operates in ENHANCEMENT MODE up to 175°C.
MRF151G
TE Connectivity
TE Connectivity's MRF151G is a N-CHANNEL FET with 40A ID and 500W power dissipation. Ideal for high-power applications, it operates in enhancement mode with a max temp of 150°C.
FDS6890A
FDS6890A by Onsemi is an N-CHANNEL Power FET with 20V DS Breakdown Voltage and 0.034 ohm RDS(ON). It features 2 elements with built-in diode, suitable for SWITCHING applications. This small outline transistor has a max operating temperature of 150°C and can handle up to 20A pulsed drain current.
FDB2532
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 310 W; Qualification: Not Qualified; Maximum Operating Temperature: 175 Cel;
IRF640
Vishay Intertechnology's IRF640 is a N-CHANNEL Power FET with 200V DS Breakdown Voltage and 72A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 125W and operates in ENHANCEMENT MODE. Suitable for various electronic devices requiring high current switching capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STP11NK50ZFP
STP11NK50ZFP by STMicroelectronics is a N-CHANNEL FET with 500V DS Breakdown Voltage, 40A IDM, and 0.52 ohm RDS(on). Ideal for SWITCHING applications due to its 30W power dissipation, 190mJ EAS rating, and ENHANCEMENT MODE operation at up to 150°C.
STP11NK50Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; JESD-609 Code: e3;
STP10NK60ZFP
STP10NK60ZFP by STMicroelectronics is a N-CHANNEL power FET with 600V DS breakdown voltage. It is used for switching applications, offering a max pulsed drain current of 36A and an avalanche energy rating of 300mJ.
STP12NK80Z
STP12NK80Z by STMicroelectronics is a N-CHANNEL FET with 800V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 42A IDM, 400mJ EAS, and 0.75 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 190W at 150°C.
New Jersey Semiconductor Products
N-CHANNEL; Configuration: SINGLE; Transistor Element Material: SILICON; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): 10.5 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
STP15NK50ZFP
STP15NK50ZFP by STMicroelectronics is a N-CHANNEL FET with 500V DS breakdown voltage and 56A pulsed drain current. Ideal for switching applications, it operates in enhancement mode with 40W power dissipation and -50 to 150°C temperature range.
STP12NM50
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 110 W; No. of Elements: 1; Maximum Operating Temperature: 150 Cel;
STP12NM50FP
STP12NM50FP by STMicroelectronics is a N-CHANNEL FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 48A IDM, 400mJ EAS, and 0.35 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max temp of 150°C and 35W power dissipation.
STP10NK70ZFP
STP10NK70ZFP by STMicroelectronics is a N-CHANNEL power FET with 700V DS breakdown voltage. It is used for switching applications, offering a max pulsed drain current of 34A and an avalanche energy rating of 350mJ.
STP12NM50FD
STP12NM50FD by STMicroelectronics is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. It's ideal for SWITCHING applications, featuring 48A IDM and 0.4 ohm RDS(on). Operating at up to 150°C, it offers a max power dissipation of 160W in a RECTANGULAR package.
STP12NM50FDFP
STP12NM50FDFP by STMicroelectronics is a power FET with N-channel configuration and built-in diode. It has a min DS breakdown voltage of 500V, making it suitable for switching applications. With a max pulsed drain current of 48A and an avalanche energy rating of 400mJ, it offers high performance in power dissipation and temperature resistance.
STP12NM50N
STP12NM50N by STMicroelectronics is a N-CHANNEL FET with 500V DS Breakdown Voltage, 44A IDM, and 0.38 ohm RDS(on). Ideal for SWITCHING applications due to its 100W power dissipation and ENHANCEMENT MODE operation. Package style is FLANGE MOUNT with Matte Tin finish, suitable for high-temp environments up to 150°C.
STP13NK60Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 135 W; Package Style (Meter): FLANGE MOUNT; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
STP120N4F6
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 110 W; Package Shape: RECTANGULAR; Qualification: Not Qualified;
STP150N10F7AG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 250 W; Transistor Element Material: SILICON; Transistor Application: SWITCHING;
STP150N10F7
STP150N10F7 by STMicroelectronics is a power FET with N-channel configuration and built-in diode. It has a min DS breakdown voltage of 100V, max pulsed drain current of 440A, and avalanche energy rating of 495mJ. This transistor is commonly used for switching applications.
STP11NM60ND
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Form: THROUGH-HOLE;
STP16NF06L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 45 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Qualification: Not Qualified;
STP105N3LL
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 140 W; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Elements: 1;
STP15N80K5
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 190 W; Transistor Element Material: SILICON; JESD-30 Code: R-PSFM-T3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved