Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ST1S06PM12R by STMicroelectronics is a compact switching regulator with a max output current of 2.3 A and operates at a nominal input voltage of 5 V. It features a high switching frequency of 1800 kHz, ideal for efficient power management in space-constrained applications. Its small outline design makes it suitable for various electronic devices requiring reliable voltage regulation.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
AZTECH Wire
$1.810
$1.740
$1.700
$1.670
IDEA Electronic Components Group
$3.436
$3.093
MKK Technologies
$6.462
DigiPath Technology Company
Advanced Electronics
$12.640
$11.502
$10.365
Microchip USA
$12.962
Component Stockers USA
$99.990
Corphita
Kepictronics
Parana Technologies
$4.108
The surface mount design allows for compact integration on PCBs, facilitating space-saving layouts.
The square package shape enhances thermal performance and allows for efficient layout in multi-chip applications.
A six-terminal configuration offers flexibility in design and enhanced connectivity options in various circuit applications.
The small outline and thin profile make it suitable for applications with limited space, such as portable devices.
Current-mode control improves dynamic response and stability, making this regulator a reliable choice for demanding applications.
Tin terminal finish provides good solderability and corrosion resistance, ensuring robust performance over time.
Dual terminal positioning facilitates easy layout design and implementation in various circuit configurations.
A maximum height of only 1 mm allows for ultra-low profiles in compact electronic designs.
With a width of 3 mm, this product fits easily in constrained spaces without sacrificing performance.
As a switching regulator, it provides higher efficiency compared to linear regulators, reducing heat and energy loss.
This specification ensures compatibility with standard power supplies and simplifies design considerations for most applications.
A compact length of 3 mm supports space-efficient layouts in modern electronic designs.
A high switching frequency enables smaller inductors and capacitors, leading to reduced overall circuit size and weight.
With a maximum output current of 2.3 A, this regulator can handle a variety of demanding loads effectively.
No-lead terminal form allows for improved thermal performance and supports modern soldering techniques like reflow soldering.
PWM control technique enables precise voltage regulation and efficient power conversion, ensuring optimal performance.
As a buck converter, it is designed to efficiently step down voltage, saving power in various applications.
A terminal pitch of 0.95 mm allows for high-density layouts, making it a good choice for miniaturized electronics.
A minimum input voltage of 4.2 V allows for compatibility with a range of voltage sources, enhancing design flexibility.
This maximum input voltage enables the regulator to work effectively with traditional power supply voltages found in many systems.
Switching Regulators & Controllers ST1S06PM12R attributes and parameters. Explore more Switching Regulators & Controllers devices from STMicroelectronics
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
ST1S06PM12R Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358AN
National Semiconductor
STM32H743IIT6
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
1N4148WS
Synsemi
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3303C
Idec
ROTARY SWITCH;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
TPS82150SILR
TPS82150SILR by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max switching frequency of 2500 kHz. Ideal for automotive applications, it operates in temperatures ranging from -40 to 125°C, making it suitable for various power management needs in compact designs.
TPS60403DBVT
TPS60403DBVT by Texas Instruments is a small outline, low profile switching regulator with a max output current of 0.06A and a max switching frequency of 400kHz. Ideal for industrial applications requiring an input voltage range from 1.8V to 5.25V, it operates in temperatures ranging from -40°C to 85°C.
TLV62568DBVR
TLV62568DBVR by Texas Instruments is a 5-terminal switching regulator with PWM control, operating at -40 to 125°C. It offers a max output current of 1A and frequency of 1500kHz, suitable for automotive applications requiring low profile design and high efficiency power conversion.
LMZ14202HTZ/NOPB
LMZ14202HTZ/NOPB by Texas Instruments is a switching regulator with 2A output current, 5-24V output voltage range, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact size of 10.16mm x 9.85mm x 4.82mm.
LM5118MH/NOPB
LM5118MH/NOPB by Texas Instruments is a switching regulator with 20 terminals, operating temperature range of -40 to 125°C, and output voltage up to 70V. Ideal for automotive applications, it features current-mode control, PWM technique, and buck-boost configuration for efficient power management in compact designs.
MC34063AP
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LMR14206XMKE/NOPB
LMR14206XMKE/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 34V and current of 0.6A, suitable for automotive applications due to its compact size and pulse width modulation control technique.
LM2596S-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2676S-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Seated Height: 4.89 mm;
LM5008AMMX/NOPB
LM5008AMMX/NOPB by Texas Instruments is a switching regulator with a max output current of 0.35 A and a max input voltage of 95 V. It is commonly used in automotive applications due to its temperature grade and small package size.
UCC28600DR
UCC28600DR by Texas Instruments is a switching regulator with a max output current of 1.2A and a max switching frequency of 130kHz. It is commonly used in industrial applications for controlling power supply voltages efficiently.
LMZ14203TZ-ADJ/NOPB
LMZ14203TZ-ADJ/NOPB by Texas Instruments is a switching regulator with 3A output current, 6V max output voltage, and 1000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact design with small outline package style.
LM60430ARPKR
LM60430ARPKR by Texas Instruments is a switching regulator with 3A max output current, 1-24V output voltage range, and 1000kHz max switching frequency. Ideal for automotive applications due to AEC-Q100 screening level, -40 to 150°C operating temperature range, and compact chip carrier package style.
LMR16006YQDDCRQ1
LMR16006YQDDCRQ1 by Texas Instruments is a small outline switching regulator with 6 terminals. It operates b/w -40 to 125 °C and supports input voltage from 4-40 V, output voltage from 0.8-36 V, and current up to 0.6 A. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LM51561HPWPR
LM51561HPWPR by Texas Instruments is a switching controller with a 12V nominal input voltage, operating b/w -40 to 150°C. It features a buck-boost switcher configuration, current-mode control mode, and pulse width modulation technique. Ideal for automotive applications due to AEC-Q100 screening level and moisture sensitivity level of 3.
LMZ14202HTZX/NOPB
LMZ14202HTZX/NOPB by Texas Instruments is a switching regulator with 2A output current, 5-24V output voltage range, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact size of 10.16mm x 9.85mm x 4.82mm.
LM5007SD/NOPB
LM5007SD/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 73V and a max output current of 0.5A, making it ideal for automotive applications requiring efficient power management up to 800kHz switching frequency.
LM2576HVS-5.0/NOPB
LM2576HVS-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 7.5A and a nominal output voltage of 5V, suitable for automotive applications. It operates in a buck configuration with a control technique of pulse width modulation, offering high efficiency and reliability in a small outline package style.
TPSM53604RDAR
TPSM53604RDAR by Texas Instruments is a 15-terminal switching regulator with a max output current of 4A and a control mode of current-mode PWM. With a wide input voltage range of 3.8V to 36V, it is ideal for automotive applications requiring efficient power conversion up to 7V output voltage.
LMZ14201TZ-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: SINGLE; Control Mode: VOLTAGE-MODE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ST1S06PUR
ST1S06PUR by STMicroelectronics is a 6-terminal switching regulator with a max output current of 1.5A and a control mode of current-mode PWM. It operates as a buck switcher with a max switching frequency of 1800kHz, suitable for applications requiring efficient voltage regulation in compact spaces.
ST1S10PHR
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: SOP8,.25;
ST1S14PHR
ST1S14PHR by STMicroelectronics is a switching regulator with 8 terminals, operating b/w -40 to 125 °C. It has a max output current of 5.2 A and supports pulse width modulation control technique. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and high switching frequency of up to 1000 kHz.
ST1S10PUR
ST1S10PUR by STMicroelectronics is a current-mode switching regulator with 3A output current and 1100kHz max frequency. Ideal for applications requiring small outline, heat sink, and thin profile packages. Operates in buck configuration with input voltage range of 2.5V to 18V, making it suitable for various power management systems.
ST1S09IPUR
ST1S09IPUR by STMicroelectronics is a current-mode switching regulator with 3.5A output, 1800kHz max frequency, and BUCK configuration. Ideal for applications requiring efficient power conversion in compact spaces due to its small outline package style and low profile design.
ST1S06PU33R
ST1S06PU33R by STMicroelectronics is a current-mode switching regulator with 6 terminals, offering a max output current of 1.5A and a nominal output voltage of 3.3V. With a compact square package style and very thin profile, it is ideal for applications requiring efficient power management in limited space, such as portable electronic devices. Operating at a max switching frequency of 1800 kHz, this buck switcher supports input voltages ranging from 4.2V to 6V, making it suitable for various battery-powered systems.
ST1S12G18R
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ST1S03PUR
ST1S03PUR by STMicroelectronics is a 6-terminal switching regulator with a max output current of 1.5A and a control mode of current-mode PWM. It operates in buck configuration, supports input voltages from 3V to 16V, and has a compact square package suitable for various applications requiring efficient power management.
ST1S41PHR
ST1S41PHR by STMicroelectronics is a switching regulator with max output current of 7A, operating temp range -40 to 125°C, and max switching frequency of 1000 kHz. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and efficient pulse width modulation control technique.
ST1S09PUR
ST1S09PUR by STMicroelectronics is a switching regulator with 3.5A output current, 1800kHz max frequency, and BUCK switcher config. Ideal for applications requiring efficient power conversion in compact spaces due to its small outline package style and low profile design.
ST1S12G12R
ST1S40IDR
ST1S40IDR by STMicroelectronics is a switching regulator with max output current of 6A and max switching frequency of 1000kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, with input voltage range from 4V to 18V.
ST1S12GR
ST1S06APUR
SWITCHING REGULATOR; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES; Minimum Input Voltage: 4.2 V;
ST1S40IPUR
ST1S40IPUR by STMicroelectronics is a switching regulator with max output current of 6A and max switching frequency of 1000kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring pulse width modulation control technique in a small outline package.
ST1S41PUR
ST1S41PUR by STMicroelectronics is a switching regulator with max output current of 7A and max switching frequency of 1000kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring a buck switcher config and pulse width modulation control technique.
ST1S32PUR
ST1S32PUR by STMicroelectronics is a current-mode switching regulator with 4A output current, 1900 kHz switching frequency, and 5.5V max input voltage. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package design.
ST1S06PU12R
ST1S06PU12R by STMicroelectronics is a 6-terminal switching regulator with a max output current of 1.5A and a max switching frequency of 1800 kHz. It operates in buck configuration, suitable for applications requiring a nominal input voltage of 5V and nominal output voltage of 3.3V.
ST1S40IPHR
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ST1S03PM
SWITCHING REGULATOR; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES; Nominal Input Voltage: 5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved