Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Repetitive Peak Reverse Voltage: 140 V;
Median Price
$0.666
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Arrow
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.466
Verical
$0.893
$0.796
Chip1Stop
$0.559
Rochester
$0.772
$0.641
$0.571
Digiode
$0.648
Bristol Electronics
$0.750
$0.278
$0.195
Vyrian
ECAB
Dan-Mar Components
Pegasus Components GmbH
ACDS - Activité Composants Distribution Service
Goldney Electronics S.L.
Anansix
Nova Conductors
LIBRA Elektronik GmbH
Semicontronic
$0.378
$0.369
$0.367
Ampacity Inc.
Corphita
$0.614
Benley Electronics
$1.500
Corohmni
$2.117
Aztec Data Supply Inc.
$3.730
IDEA Electronic Components Group
$3.869
$3.482
MKK Technologies
$7.275
DigiPath Technology Company
Kepictronics
Perfect Parts
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Continental Prestige Electronics
Argo Parts USA
A-Z Elektronik GmbH
GreenTree Electronics
Parana Technologies
$4.626
Bastille Electronics
Silicon Surge Protectors SMP100LC-140 attributes and parameters. Explore more Silicon Surge Protectors devices from STMicroelectronics
Maximum Breakdown Voltage:
Configuration:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Repetitive Peak Reverse Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
SMP100LC-140 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
PCN Assembly/Origin - Mult Dev 06/Mar/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Micro Commercial Components
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Diotec Semiconductor Ag
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
SMTPB62
SMTPB62 by STMicroelectronics is a silicon surge protector designed for surface mount applications. It features a max breakdown voltage of 82V, non-repetitive peak on-state current of 50A, and comes in a compact rectangular package. Ideal for protecting sensitive electronics from voltage spikes.
LCP1511
LCP1511 by STMicroelectronics is a Silicon Surge Protector with 15mA DC Gate Trigger Current, 5A Non Repetitive Peak On-state Current, and 2.5V Max DC Gate Trigger Voltage. It is used for surge protection in various applications due to its complex configuration and small outline package style.
SMP100LC-230
SMP100LC-230 by STMicroelectronics is a silicon surge protector with 24A non-repetitive peak on-state current and 230V repetitive peak reverse voltage. It is a single configuration device in a surface-mount package, suitable for applications requiring protection against voltage surges. Operating temperature ranges from -55°C to 150°C, making it ideal for various electronic systems.
TISP3250H3SL
Texas Instruments
TISP3250H3SL by Texas Instruments is a Silicon Surge Protector with 60A Non Repetitive Peak On-state Current. It features SERIES CONNECTED, CENTER TAP configuration and 190V Max DC Off-state Voltage. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4070M3BJR
TISP4070M3BJR by Texas Instruments is a single silicon surge protector with 32A peak current, 58V DC voltage, and 70V breakdown voltage. It is a thyristor surge protector for applications requiring protection against electrical surges in small outline packages. Operating temperature ranges from -40°C to 150°C making it suitable for various electronic devices.
TISP4115M3BJ
TISP4115M3BJ by Texas Instruments is a single silicon surge protector with 32A peak current, 90V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection technology.
NP2600GBRLG
Onsemi
NP2600GBRLG by Onsemi is a single silicon surge protector with 2 wire terminals. It has a max DC off-state voltage of 220V and a max breakdown voltage of 300V. This thyristor surge protector is UL recognized, ideal for applications requiring isolated case connection and high holding current up to 150000mA.
TISP7072F3DR
TISP7072F3DR by Texas Instruments is a silicon surge protector with 3A peak current, 72V breakdown voltage, and UL recognition. It is a thyristor surge protector in a small outline package ideal for surface mount applications. The device features 3 elements in delta configuration for effective protection against electrical surges.
TISP4125F3D
TISP4125F3D by Texas Instruments is a single silicon surge protector with 4A peak current, 100V max voltage, and 150°C operating temp. Ideal for protecting circuits in electronics from voltage spikes. Surface mountable with UL recognition, it has dual terminals and Gull Wing form factor.
THBT200SD
STMicroelectronics THBT200SD is a silicon surge protector with 3 terminals, max breakdown voltage of 290V. It has UL recognition and uses tin/lead finish. Ideal for surge protection applications due to its in-line package style and through-hole terminal form.
NP1800GBRLG
NP1800GBRLG by Onsemi is a single silicon surge protector with 170V DC off-state voltage and 220V max breakdown voltage. It features a thyristor surge protector configuration, suitable for applications requiring high holding current up to 150000mA. Ideal for UL recognized systems needing isolated case connection in plastic/epoxy package style.
TISP4115H3LMR
TISP4115H3LMR by Texas Instruments is a single silicon surge protector with 60A peak current and 90V off-state voltage. It is a thyristor surge protector suitable for applications requiring protection against electrical surges, with an operating temperature range of -40 to 150°C.
LS5018B
STMicroelectronics LS5018B is a single silicon surge protector with 50A non-repetitive peak on-state current. It has 8 terminals in an inline rectangular package, ideal for surge protection applications requiring a max breakdown voltage of 22V.
TISP3072F3DR
TISP3072F3DR by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current, 58V Max DC Off-state Voltage, and 72V Max Breakdown Voltage. It is used for surge protection in various applications like telecommunications equipment and industrial controls due to its THYRISTOR SURGE PROTECTOR configuration.
ETP01-1621
STMicroelectronics ETP01-1621 is a Silicon Surge Protector with 3 elements, 8 terminals, and max breakdown voltage of 25V. It has a small outline package shape suitable for surface mount applications. Operating temp range: -40 to 150 °C, ideal for complex configurations needing surge protection.
ETP01-2821
STMicroelectronics ETP01-2821 is a Silicon Surge Protector with 3 elements, 8 terminals, and max breakdown voltage of 36V. It has a complex configuration, Gull Wing terminal form, and operates b/w -40 °C to 150°C. Ideal for surge protection in various electronic applications.
THBT20011
THBT20011 by STMicroelectronics is a silicon surge protector designed for robust circuit protection. It features a max breakdown voltage of 290 V, supports 5 A peak on-state current, and comes in a compact rectangular package. Ideal for applications requiring reliable surge protection in electronic devices.
TISP4250M3BJ
TISP4250M3BJ by Texas Instruments is a single silicon surge protector with 32A peak current, 190V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
FLC01-200B
FLC01-200B by STMicroelectronics is a silicon surge protector designed for surface mount applications. It features a min breakdown voltage of 206 V, max operating temp of 150 °C, and a built-in diode and resistor configuration. Ideal for protecting sensitive electronics from voltage spikes.
NP2600SCT3G
NP2600SCT3G by Onsemi is a single silicon surge protector with 2 terminals, max breakdown voltage of 300V, and trigger device type as thyristor. It has a small outline package style and is suitable for applications requiring protection against surges in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMP100LC-35
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Shape: RECTANGULAR;
SMP100LC-8
SMP100LC-8 by STMicroelectronics is a silicon surge protector with 24A non-repetitive peak on-state current and 8V repetitive peak reverse voltage. It is a single configuration device suitable for surface mount applications in various electronic circuits, offering protection against voltage surges. Operating temperature ranges from -55°C to 150°C, making it ideal for diverse environments.
SMP100LC-400
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Breakdown Voltage: 530 V;
SMP100LC-160
Vishay Intertechnology
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-30 Code: R-PDSO-C2;
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Peak Reflow Temperature (C): 260;
SMP100LC-270
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e3;
Vishay Intertechnology's SMP100LC-270 is a silicon surge protector with 55A non-repetitive peak current and 262V repetitive peak reverse voltage. Ideal for protecting electronic devices from power surges, it features a thyristor surge protector configuration in a surface-mount package with plastic/epoxy material.
SMP100LC-140
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Non Repetitive Peak On-state Current: 55 A;
SMP100LC-25
SMP100LC-25 by STMicroelectronics is a silicon surge protector with a non-repetitive peak on-state current of 24A and a repetitive peak reverse voltage of 25V. It is designed for surface mount applications, featuring a package style of small outline and terminal finish in matte tin. Ideal for protecting electronic circuits from voltage spikes in various industrial and consumer electronics devices.
SMP100LC-65
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Terminals: 2;
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-30 Code: R-PDSO-C2;
SMP100-230
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Terminals: 2;
SMP100LC-120
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Finish: Matte Tin (Sn) - annealed;
SMP100-140H125
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Breakdown Voltage: 220 V;
SMP100-230H225
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JEDEC-95 Code: DO-214AA;
SMP100-270
SMP100-120H225
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
SMP100-140H225
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Finish: MATTE TIN;
SMP100-270H225
SMP100LC-270-E3
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Breakdown Voltage: 350 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved