Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
L7920 by STMicroelectronics is a fixed negative single output regulator designed for reliable performance. It features a bipolar technology, metal package, and flange mount style with 2 terminals. Ideal for powering sensitive analog circuits in various applications.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Anansix
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Vyrian
IDEA Electronic Components Group
$6.135
$5.522
MKK Technologies
$11.537
DigiPath Technology Company
Parana Technologies
$7.336
Corphita
The metal package body provides excellent durability and thermal conductivity, making it suitable for applications that require reliable performance in various environmental conditions.
Bipolar technology allows for high-speed operation and low noise, making this regulator a great choice for sensitive electronic applications.
The round package shape facilitates easy integration into compact circuit designs, allowing for efficient space utilization.
Pin/PEG terminal form ensures secure connections and simplifies the assembly process, enhancing reliability in circuit designs.
With only two terminals, this regulator simplifies installation and reduces the potential for wiring errors, making it user-friendly.
Flange mount style provides a stable installation option, ensuring the regulator remains securely in place even in high-vibration environments.
This type of regulator provides a consistent negative output voltage, ideal for powering analog circuits and other voltage-sensitive applications.
Bottom terminal positioning allows for efficient PCB layout and helps improve overall circuit design while maintaining a low profile.
Fixed Regulators - Negative Single Output Standard L7920 attributes and parameters. Explore more Fixed Regulators - Negative Single Output Standard devices from STMicroelectronics
JESD-30 Code:
No. of Functions:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Surface Mount:
Technology:
Terminal Form:
Terminal Position:
L7920 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
Panjit International
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC79L12ABPG
MC79L12ABPG by Onsemi is a fixed negative single output standard regulator with an operating temperature range of -40 to 125°C. It offers a nominal output voltage of 12V, max load regulation of 0.1%, and max input voltage of 27V. Ideal for applications requiring stable power supply in various electronic devices.
UA7908CKTER
UA7908CKTER by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 8V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs. The package style is small outline, ideal for surface mount applications where space is limited.
L79L06ABD13TR
STMicroelectronics
L79L06ABD13TR from STMicroelectronics is a fixed negative regulator with a nominal output of 6V and max current of 0.1A, ideal for low-power applications. It operates b/w -40 °C to 125 °C, ensuring reliability in various environments. Its compact SO-8 package facilitates easy surface mounting.
UA79M08CKVURG3
UA79M08CKVURG3 by Texas Instruments is a fixed negative single output standard regulator with an 8V nominal output voltage and 0.5A max output current. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in a compact package. The device features surface mount capability and Gull Wing terminal form, ideal for space-constrained designs in electronics.
LM79L05ACMX
LM79L05ACMX by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs.
MC79L15ACLP
MC79L15ACLP by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 15V and max current of 0.1A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact cylindrical package.
OM7915AIH
Infineon Technologies
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 3 %; Maximum Line Regulation: .05 %;
L79L08ABD13TR
L79L08ABD13TR from STMicroelectronics is a fixed negative regulator with an 8V output, ideal for applications requiring stable voltage. It operates b/w -40 °C and 125 °C, supports up to 0.1A load current, and features a compact SO package. Its high line regulation of 0.175% ensures reliable performance in various electronic devices.
L79L12ABZTR
L79L12ABZTR from STMicroelectronics is a fixed negative regulator with a nominal output of 12V and max current of 0.1A, suitable for various applications. It operates b/w -40 °C to 125 °C, ensuring reliability in extreme conditions. With excellent line and load regulation, it’s ideal for stable voltage supply needs.
L7915
L7915 by STMicroelectronics is a fixed negative single output regulator designed for reliable voltage regulation. It features a bipolar technology, metal package, and flange mount style with 2 terminals. Ideal for powering sensitive electronic circuits in various applications.
OMR7915SR
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: GULL WING; Terminal Position: SINGLE; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
MC79L15CPRE
MC79L15CPRE by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage. It operates in temperatures from 0 to 125 °C, suitable for various applications requiring stable power supply. The package style is cylindrical with through-hole terminals, making it easy to integrate into electronic circuits.
MC7915BD2T
MC7915BD2T by Onsemi is a fixed negative single output standard regulator with an output voltage of 15V and max current of 1A. It operates in temperatures ranging from -40 to 125 °C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
MC7912CD2TR4G
MC7912CD2TR4G by Onsemi is a fixed negative single output standard regulator with 12V nominal output voltage and 1A max output current. It operates at an adjustable temperature range of 0-125 °C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
UA7912CKTE
UA7912CKTE by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 12V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supplies in compact designs. The package style is small outline, ideal for surface mount applications where space is limited.
TA79024SB
Toshiba
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SIP; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 4.17 %;
MC79L05ABDR2G
MC79L05ABDR2G by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC7906CD2TG
MC7906CD2TG by Onsemi is a fixed negative single output standard regulator with 1A max output current. It has an operating temperature range of 0-125 °C and a nominal output voltage of 6V. Ideal for applications requiring a compact, surface-mountable regulator with precise voltage regulation.
MC79L15CPRA
MC79L15CPRA by Onsemi is a fixed negative single output standard regulator with a nominal output voltage of 15V and max output voltage of 16.5V. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring stable power supplies in electronic circuits. The package style is cylindrical with three terminals in a through-hole form, ideal for PCB mounting.
L7924
L7924 by STMicroelectronics is a fixed negative single output regulator designed for reliable voltage regulation. It features a bipolar technology, metal package, and flange mount style with 2 terminals. Ideal for applications requiring stable negative voltage supply in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L7922CD2T-TR
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;
L7920CV
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;
L7920ACD2T-TR
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 4 %;
L7922ACV
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 4 %;
L7922AB
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO; Package Shape: RECTANGULAR;
L7920CP
L7922CT
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-3; Terminal Form: PIN/PEG; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;
L7920AB
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Technology: BIPOLAR; JESD-30 Code: R-PSFM-T3; Package Style (Meter): FLANGE MOUNT;
L7922
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: PIN/PEG; Terminal Position: BOTTOM; Surface Mount: NO; Package Shape: ROUND;
L7920ACV
L7922ACD2T-TR
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 4.1 %;
L7922AC
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; No. of Functions: 1; Technology: BIPOLAR;
L7920CD2T-TR
L7922CD2T
L7920ACD2T
L7920CT
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-3; Terminal Form: PIN/PEG; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;
L7920AC
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Style (Meter): FLANGE MOUNT; Package Body Material: PLASTIC/EPOXY; Terminal Position: SINGLE;
L7920CD2T
L7922ACD2T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved