Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics L7922CD2T is a fixed negative single output standard regulator with an output voltage of 22V and max current of 1.5A. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring stable power supply in compact spaces.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
IDEA Electronic Components Group
$9.050
$8.145
MKK Technologies
$17.018
DigiPath Technology Company
Parana Technologies
$10.821
Corphita
The use of plastic/epoxy material makes the product lightweight and durable, ensuring a longer lifespan.
With a high maximum operating temperature, this regulator can handle a wide range of environmental conditions, making it versatile for different applications.
The stable output voltage of 22V ensures reliable performance and consistency in power supply, making it suitable for various electronic devices.
The high maximum output current of 1.5A allows this regulator to power a wide range of devices without any issues, making it versatile and efficient.
The fixed adjustability ensures that the output voltage remains constant, providing a stable power supply for connected devices.
Fixed Regulators - Negative Single Output Standard L7922CD2T attributes and parameters. Explore more Fixed Regulators - Negative Single Output Standard devices from STMicroelectronics
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
L7922CD2T Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Laube Technology
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99-7-F
ROHM
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diodes Incorporated
LM320T-12
Texas Instruments
LM320T-12 by Texas Instruments is a fixed negative single output standard regulator with an operating temperature range of -55 to 150°C. It has a min input voltage of 32V, max output current of 1A, and nominal output voltage of 12V. Ideal for applications requiring stable power supply in harsh environments.
L79L06ABZ-AP
STMicroelectronics
L79L06ABZ-AP by STMicroelectronics is a fixed negative regulator with a nominal output of 6V and max current of 0.1A, ideal for stable voltage applications. It operates b/w -40 °C to 125 °C, ensuring reliability in harsh environments. Its compact cylindrical package allows easy integration into various electronic designs.
L7924ACD2T
L7924ACD2T by STMicroelectronics is a fixed negative single output standard regulator with an output voltage of 24V and max current of 1.5A. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications in electronics requiring stable power supply. Its small outline package and gull wing terminals offer easy integration on PCBs.
MC79L12CPRP
MC79L12CPRP by Onsemi is a fixed negative single output standard regulator with a nominal output voltage of 12V and max input voltage of 27V. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring stable power supply in electronic circuits. The through-hole package style and bipolar technology enhance its durability and performance in different environments.
L79L05ACD13TR
L79L05ACD13TR by STMicroelectronics is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
L79L12ABZ
L79L12ABZ by STMicroelectronics is a fixed negative single output standard regulator with an operating temperature range of -40 to 125 °C. It has a nominal output voltage of 12V, max load regulation of 0.1%, and can handle a max output current of 0.1A. Ideal for applications requiring stable power supply in harsh environments.
UA7908CKC
UA7908CKC by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 8V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply in a through-hole package.
MC79L12ACLPE3
MC79L12ACLPE3 by Texas Instruments is a fixed negative single output standard regulator with 12V nominal output voltage, 0.1A max output current, and 3% max voltage tolerance. It is ideal for applications requiring stable power supply in a compact cylindrical package with through-hole terminals.
LM79L05ACZ/LFT1
LM79L05ACZ/LFT1 by Texas Instruments is a fixed negative single output standard regulator with an operating temperature range of 0-125°C. It has a max output current of 0.1A, voltage tolerance of 5%, and dropout voltage of 1.7V. Ideal for applications requiring a stable -5V output in compact designs with through-hole mounting.
LM120K-5.0/883
LM120K-5.0/883 by Texas Instruments is a MIL-STD-883 compliant fixed negative single output standard regulator with an operating temperature range of -55 to 150°C. It has a max output current of 1.5A, min input voltage of 25V, and nominal output voltage of 5V. This regulator is ideal for applications requiring precise voltage regulation in harsh environments.
MC79L15ACDR2G
MC79L15ACDR2G by Onsemi is a fixed negative single output standard regulator with an operating temperature range of 0 to 125°C. It has a max output current of 0.1A and can handle input voltages up to 30V, making it suitable for various applications requiring stable voltage regulation in a compact package.
L7906CV
L7906CV by STMicroelectronics is a fixed negative single output standard regulator with an operating temperature range of 0-125 °C. It offers a max output current of 1.5A, nominal output voltage of 6V, and max input voltage of 25V. Ideal for applications requiring stable power supply in various electronic devices.
L79L09ABD
STMicroelectronics L79L09ABD is a fixed negative single output standard regulator with an output voltage of 9V and max current of 0.1A. Operating temperature ranges from -40 to 125 °C, making it suitable for various applications requiring stable voltage regulation in compact designs.
MC79L05ACDG4
MC79L05ACDG4 by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs.
LM120H-12/NOPB
LM120H-12/NOPB by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 12V and max current of 1.5A. Operating temperature ranges from -55 to 150°C, making it suitable for various applications in electronics requiring stable power supply. Its compact cylindrical package with gold terminal finish ensures reliable performance in diverse environments.
MC79M15BDTRK
MC79M15BDTRK by Onsemi is a fixed negative single output standard regulator with an output voltage of 15V and max current of 0.5A. Operating temperature ranges from -40 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The surface-mount package style and small outline design enhance its versatility in modern circuit designs.
MC7905BD2TR4G
MC7905BD2TR4G by Onsemi is a fixed negative single output standard regulator with 5% voltage tolerance. It operates b/w -40 to 125°C, providing a nominal output of 5V at 1A. Ideal for applications requiring stable power supply in compact designs.
MC79M15BDTG
MC79M15BDTG by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage. It has a max output current of 0.5A and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact spaces.
7704001HA
The Texas Instruments 7704001HA is a fixed negative single output standard regulator with a package style of flatpack. It has an operating temperature range from 0 to 125°C and can handle up to 0.5A of max output current. This regulator is suitable for applications requiring a stable output voltage of 5V with a tolerance of 5%.
MC79M05BDTRKG
MC79M05BDTRKG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max output current of 0.5A. It is commonly used in applications requiring a stable and regulated power supply, such as industrial control systems and automotive electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L7922CD2T-TR
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;
L7920CV
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;
L7920ACD2T-TR
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 4 %;
L7922ACV
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 4 %;
L7922AB
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO; Package Shape: RECTANGULAR;
L7920CP
L7922CT
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-3; Terminal Form: PIN/PEG; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;
L7920AB
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Technology: BIPOLAR; JESD-30 Code: R-PSFM-T3; Package Style (Meter): FLANGE MOUNT;
L7922
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: PIN/PEG; Terminal Position: BOTTOM; Surface Mount: NO; Package Shape: ROUND;
L7920ACV
L7922ACD2T-TR
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 4.1 %;
L7922AC
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; No. of Functions: 1; Technology: BIPOLAR;
L7920CD2T-TR
L7920ACD2T
L7920CT
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-3; Terminal Form: PIN/PEG; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;
L7920
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: PIN/PEG; Package Style (Meter): FLANGE MOUNT; Package Body Material: METAL; Qualification Status: Not Qualified;
L7920AC
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Style (Meter): FLANGE MOUNT; Package Body Material: PLASTIC/EPOXY; Terminal Position: SINGLE;
L7920CD2T
L7922ACD2T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved