Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
Median Price
$3.160
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
Anansix
Vyrian
Corohmni
$2.339
Continental Prestige Electronics
$3.097
Argo Parts USA
IDEA Electronic Components Group
$10.292
$9.263
Ampacity Inc.
$12.500
Aztec Data Supply Inc.
$13.350
Microchip USA
$15.444
AZTECH Wire
$16.525
MKK Technologies
$19.354
DigiPath Technology Company
Parana Technologies
$12.306
Corphita
Peripheral Drivers IPS161HF attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Interface IC Type:
Peak Reflow Temperature (C):
Maximum Time At Peak Reflow Temperature (s):
IPS161HF Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
1554216004
Molex
WIRE AND CABLE;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Laube Technology
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
TPS22916BYFPR
TPS22916BYFPR by Texas Instruments is a 4-terminal peripheral driver with a supply voltage range of 1V to 5.5V. It offers transient protection, operates in industrial temperature range (-40°C to 85°C), and has a peak reflow temperature of 260°C. Ideal for buffer or inverter applications requiring source current flow direction.
VND5050J-E
STMicroelectronics
VND5050J-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used as a buffer or inverter-based peripheral driver for applications requiring sink output current flow direction. The package style is small outline with low profile and matte tin terminal finish.
IRS2186STRPBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TBD62083AFWG(Z,EHZ)
Toshiba
Toshiba TBD62083AFWG(Z,EHZ) is a Peripheral Driver with 8 functions, 18 terminals, and built-in transient protection. It operates b/w -40 to 85 °C with a supply voltage range of 2.5V to 25V. Ideal for industrial applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
IFX9201SGAUMA1
Infineon Technologies
IFX9201SGAUMA1 by Infineon is a 12-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 8-36 V. Ideal for automotive applications due to its small outline package style and sink output current flow direction.
FDC6330L
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
VNQ7140AJTR-E
STMicroelectronics' VNQ7140AJTR-E is a peripheral driver with 1 function, operating at supply voltages from 4V to 28V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. This small outline IC is ideal for buffer or inverter-based applications requiring fast turn-on/off times of 120us/100us and sink output current flow.
TPS22965DSGR
TPS22965DSGR by Texas Instruments is a Peripheral Driver with 8 terminals, operating b/w -40 to 105 °C. It has a supply voltage range of 2.5V to 5.7V and built-in transient protection. Ideal for industrial applications requiring source/sink current flow control in compact designs.
UDN2982LWTR-T
Allegro MicroSystems
UDN2982LWTR-T by Allegro MicroSystems is a peripheral driver with 8 functions. It has a max supply voltage of 50V and can handle a max output current of 0.35A. This IC type is commonly used as a buffer or inverter based peripheral driver in various applications.
SN754410NE
SN754410NE by Texas Instruments is a 16-terminal peripheral driver with built-in transient and thermal protections. It operates b/w -40 to 85°C, supports a max output current of 1A, and has a turn-on time of 0.4us. Ideal for industrial applications requiring true output polarity control in a compact package style.
FAN7391MX
FAN7391MX by Onsemi is a 14-terminal peripheral driver with built-in transient and under voltage protections. It operates b/w -40 to 125 °C, with a supply voltage range of 10-20 V. Ideal for automotive applications, it features a turn-on time of 0.05 us and turn-off time of 0.045 us.
PTPS1H000AQDGNRQ1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Screening Level: AEC-Q100;
IR25600SPBF
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BTS141TCBUMA1
BTS141TCBUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 40us. This small outline package driver is ideal for applications requiring sink output current flow direction.
TPS27SA08CQPWPRQ1
TPS27SA08CQPWPRQ1 by Texas Instruments is a peripheral driver with a max supply voltage of 36V, built-in protections for transient, over current, thermal, and under voltage. It is designed for automotive applications with a high side driver feature and can handle a max output current of 10A. The package style is small outline with heat sink/slug and thin profile, making it suitable for compact designs in automotive systems.
FPF2700MPX
FPF2700MPX by Onsemi is a peripheral driver with a supply voltage range of 2.8V to 36V, offering built-in protections against overcurrent, thermal issues, and undervoltage. This industrial-grade device has a compact square package style with 8 terminals and operates in temperatures ranging from -40°C to 85°C. It serves as an interface IC type for buffer or inverter-based applications requiring a max output peak current limit of 0.4A.
IPS160HTR
STMicroelectronics' IPS160HTR is a 12-terminal peripheral driver with 2.5A output current, suitable for various applications. It operates on 8-36V power supplies and features a small outline package style. The interface IC type is buffer or inverter based, making it ideal for electronic systems requiring high-current drive capabilities.
FPF2125
FPF2125 by Onsemi is a MOS technology peripheral driver with 5 terminals and built-in protections. It operates b/w -40 to 85 °C, with a supply voltage range of 1.8-5.5 V. Ideal for industrial applications requiring a compact, low-profile design and peak current limit of 0.8 A.
BTM7740GXUMA1
Infineon's BTM7740GXUMA1 is a 28-terminal peripheral driver with a peak current limit of 15A. It features Gull Wing terminals, suitable for surface mount applications. This buffer/inverter-based driver supports bidirectional current flow and is ideal for various electronic systems requiring high output currents.
IRS2153DSPBF
IRS2153DSPBF by Infineon Technologies is a CMOS half bridge peripheral driver with 8 terminals. It operates b/w -40 to 125 °C and supports a supply voltage range of 10.1-15.4 V. Ideal for automotive applications, it offers under voltage protection and source/sink current flow direction.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IPS160HFTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
IPS160H
STMicroelectronics' IPS160H is a peripheral driver with 12 terminals, supporting power supplies from 8V to 36V. It offers a max output current of 2.5A and features a small outline package style for surface mount applications. Ideal for buffer or inverter-based interface ICs, this rectangular-shaped driver has dual terminal positions and gull wing form factor.
IPS160HF
IPS161HFTR
IPS161HTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: Matte Tin (Sn) - annealed; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
IPS161H
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HLSSOP; Package Shape: RECTANGULAR;
IPS1025HFTR
IPS1042GPBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
IPS1025HFQ
IPS1025HF
IPS1031PBF
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Shape: RECTANGULAR; Built-in Protections: THERMAL; OVER VOLTAGE; Maximum Supply Voltage: 5.5 V;
IPS1025HTR-32
IPS1025H
IPS1025HQ
IPS1025HQ-32
IPS1025H-32
IPS1025HTR
IPS1011RTRPBF
Peripheral Drivers; No. of Terminals: 3; Terminal Pitch: 2.3 mm; Qualification: Not Qualified; Driver No. of Bits: 1; Terminal Position: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved