Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FPF2110 by Onsemi is a MOS technology-based peripheral driver with built-in protections against transient, over current, and over voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.8-5.5 V, making it suitable for industrial applications requiring a max output current of 0.8 A in a compact package style measuring 2.9mm x 1.6mm x 1.4mm.
Median Price
$1.072
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.150
100+ parts
$0.797
1k+ parts
$0.660
10k+ parts
-
Adafruit Industries
$3.613
$3.433
Mouser Electronics
$0.994
Rochester
$0.787
$0.653
$0.583
Flip Electronics
$0.440
Digiode
$0.577
Nova Conductors
$0.701
Chip Stock
Vyrian
Prism Electronics
Resion
Ampacity Inc.
$0.510
Semicontronic
$0.497
$0.495
Corphita
$0.546
Corohmni
$0.600
Continental Prestige Electronics
$0.687
Argo Parts USA
$0.680
Component Stockers USA
$0.730
Advanced Electronics
Aztec Data Supply Inc.
$12.044
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
Kepictronics
Perfect Parts
SupplyDigital Components
Authorized Procurement Solutions
Microchip USA
Problanco Electronics
Kulean Microsystems
Robosynatics
$14.625
$14.326
Lucentia Tech
Netroflash
$0.666
$0.652
Supply Digital
Alle Elektronik GmbH
UHIMA Technologies
TANS Electronics
The use of plastic/epoxy material makes the product lightweight and durable, suitable for portable and long-lasting applications.
The surface mount feature allows for easy and efficient installation on PCBs, saving space and reducing assembly time.
With a high maximum supply voltage of 5.5V, this peripheral driver can be used in a wide range of applications, providing flexibility and compatibility.
The built-in protections ensure the safety and reliability of the connected devices by preventing damage from various electrical faults and conditions.
The wide range of power supply voltages (1.8V to 5.5V) allows for compatibility with different power sources, making this peripheral driver versatile in various applications.
With 5 terminals, this peripheral driver provides sufficient connections for interfacing with external devices, allowing for versatile functionality.
The high maximum output current of 0.8A enables this peripheral driver to drive power-hungry components efficiently, making it suitable for demanding applications.
Peripheral Drivers FPF2110 attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Maximum Output Current:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
FPF2110 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
BAV99
Meritek Electronics
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
BAV99+
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LM317AEMP/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
NXP Semiconductors
Excel (Suzhou) Semiconductor
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS2482X-100+T
Analog Devices
DS2482X-100+T by Analog Devices is a peripheral driver with 9 terminals, operating voltage range of 2.9V to 5.5V, and built-in overcurrent protection. It features a compact rectangular package style suitable for industrial applications requiring source output current flow direction.
VND5050JTR-E
STMicroelectronics
VND5050JTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used for buffer or inverter-based interface ICs, offering sink output current flow direction. The small outline package with low profile makes it suitable for various applications requiring reliable driving capabilities.
VNQ5050KTR-E
STMicroelectronics VNQ5050KTR-E is a 4-function peripheral driver with max supply voltage of 36V and output current of 2A. It features built-in protections for transient, over current, over voltage, thermal, and under voltage. Ideal for applications requiring SOURCE flow direction in small outline package style.
MC10XS3412CHFKR2
Freescale Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: BUTT; No. of Terminals: 16; Package Code: HBCC; Package Shape: SQUARE;
BTS724GXUMA1
Infineon Technologies
BTS724GXUMA1 by Infineon Technologies is a 20-terminal peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a nominal voltage of 12V and has a max output peak current limit of 7.3A. This small outline package driver is ideal for applications requiring sink output current flow direction.
L6201013TR
L6201013TR by STMicroelectronics is a full bridge peripheral driver with 20 terminals, operating voltage range of 12-48V. It features built-in transient and thermal protections, output polarity is true with source and sink current flow direction. Ideal for applications requiring high reliability in small outline packages.
E-L9823013TR
E-L9823013TR by STMicroelectronics is a peripheral driver with 24 terminals, 5V supply voltage, and 0.5A max output current. It features a small outline package style and gull wing terminal form. Ideal for applications requiring precise control of peripherals in electronic systems.
BTS6143D
BTS6143D by Infineon Technologies is a peripheral driver with 4 terminals and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages of 5.5V to 12V with a max of 38V. Ideal for applications requiring a nominal output peak current limit of 8A in automotive electronics.
FDC6330L
FDC6330L by Onsemi is a CMOS technology peripheral driver with 6 terminals and built-in transient protection. It operates b/w -55 to 150 °C, with a max output current of 2.3 A. Ideal for military-grade applications requiring a small outline, low profile package style.
IRS44262SPBF
IRS44262SPBF by Infineon Technologies is a peripheral driver with 8 terminals, operating voltage range of 11.2-20V, and built-in under voltage protection. It is a CMOS technology-based half bridge peripheral driver suitable for automotive applications due to its small outline package and source/sink current flow capability. With turn-on/off times of 0.095 us, it offers a nominal output peak current limit of 3.3A for efficient performance in various automotive systems.
VNH5050ATR-E
VNH5050ATR-E by STMicroelectronics is a peripheral driver with 36 terminals, operating voltage range of 5.5-18 V. It offers built-in protections against transient, over current, over voltage, thermal and under voltage conditions. Ideal for applications requiring a half bridge based peripheral driver with sink output current flow direction.
MIC2544A-1YM
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ISP752RFUMA1
ISP752RFUMA1 by Infineon Technologies is a peripheral driver with 8 terminals and built-in protections. It operates b/w -30 to 85 °C, with a supply voltage range of 6-52 V. Ideal for applications requiring a small outline package style and sink output current flow direction.
L293NE
Texas Instruments
L293NE by Texas Instruments is a peripheral driver with 2 functions, operating at 4.5-36V. It offers built-in transient and thermal protections, with a max output current of 2A. Ideal for applications requiring true output polarity control in commercial temperature environments.
SN75451BDR
SN75451BDR by Texas Instruments is a peripheral driver with 2 functions, operating at 5V. It features open-collector output polarity and can handle a max output current of 0.5A. Ideal for applications requiring AND gate based peripheral drivers in commercial temperature grades.
BSP742RXUMA1
BSP742RXUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a nominal voltage of 13.5 V and has a max supply voltage of 34 V. This small outline package driver is ideal for applications requiring buffer or inverter based peripheral drivers with a sink output current flow direction.
IRS44273LTRPBF
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
EL7156CSZ-T7A
Renesas Electronics
EL7156CSZ-T7A by Renesas Electronics is a small outline peripheral driver with 8 terminals, operating temperature range of -40 to 85°C. It has a nominal voltage of ±5V and output peak current limit of 3.5A. Ideal for industrial applications requiring source and sink current flow control in compact designs.
ULN-2801A
Vishay Sprague
Vishay Sprague's ULN-2801A is an 8-function peripheral driver with built-in transient protection. It operates b/w -20°C to 85°C, featuring open-collector output characteristics and a turn-on/off time of 1 us. Ideal for applications requiring sink current flow direction, this rectangular package style IC is commonly used in buffer or inverter-based interfaces.
ISP772TFUMA1
ISP772TFUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, offering built-in protections against transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. Ideal for applications requiring buffer or inverter based peripheral drivers.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FPF2123
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
FPF2123 by Onsemi is a peripheral driver with 5.5V max supply voltage, 0.8A output peak current limit, and built-in protections. It is used in industrial applications requiring a compact form factor and operates b/w -40 to 85°C.
FPF2700MX
FPF2700MX by Onsemi is a peripheral driver with a supply voltage range of 2.8V to 36V, offering built-in protections for overcurrent, thermal, and undervoltage. This small outline package IC has 8 terminals and operates in industrial temperature grades from -40°C to 85°C. Ideal for applications requiring buffer or inverter-based peripheral drivers with a peak output current limit of 0.4A.
FPF2125
FPF2125 by Onsemi is a MOS technology peripheral driver with 5 terminals and built-in protections. It operates b/w -40 to 85 °C, with a supply voltage range of 1.8-5.5 V. Ideal for industrial applications requiring a compact, low-profile design and peak current limit of 0.8 A.
FPF2104
FPF2107
FPF2124
FPF2124 by Onsemi is a MOS technology-based peripheral driver with 5 terminals and built-in protections. It operates b/w -40 to 85 °C, with a supply voltage range of 1.8-5.5 V. Ideal for industrial applications requiring a compact, low-profile design and peak current limit of 0.8 A.
FPF2101
FPF2100
FPF2102
FPF2106
FPF2103
FPF2105
FPF2701MPX
FPF2701MPX by Onsemi is a peripheral driver with a max supply voltage of 36V and built-in protections for over current, thermal, and under voltage. It has 8 terminals in a small outline package style suitable for industrial applications requiring a nominal output peak current limit of 0.4A.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
FPF2700MPX
FPF2700MPX by Onsemi is a peripheral driver with a supply voltage range of 2.8V to 36V, offering built-in protections against overcurrent, thermal issues, and undervoltage. This industrial-grade device has a compact square package style with 8 terminals and operates in temperatures ranging from -40°C to 85°C. It serves as an interface IC type for buffer or inverter-based applications requiring a max output peak current limit of 0.4A.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved