Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EMIF02-USB05F2 by STMicroelectronics is a compact data line filter designed for USB applications, featuring a max operating temp of 85 °C and a capacitance of 30µF. It operates b/w -40°C to 85°C and comes in a surface mount package. Ideal for protecting sensitive electronics from noise.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Native Components
$1.201
Northwest PG Solutions
$1.321
IDEA Electronic Components Group
$3.127
$2.814
MKK Technologies
$5.880
DigiPath Technology Company
AZTECH Wire
$9.640
Perfect Parts
Authorized Procurement Solutions
Corphita
RC Electronics
Parana Technologies
$3.739
Meets international standards, ensuring reliability and compatibility in various applications.
Versatile functionality allows for enhanced performance in data line filtering.
Specifically designed to effectively suppress noise, ensuring better signal integrity.
High temperature tolerance for robust performance in demanding environments.
Wide temperature range allows for reliable operation in extreme conditions.
High-quality finish improves conductivity and reduces oxidation for longer service life.
Compact size enables efficient use of space and ease of integration in designs.
Small footprint suitable for space-constrained applications without compromising functionality.
Facilitates automated assembly processes, enhancing production efficiency.
Surface mount design streamlines integration into PCB designs, saving space.
Precise dimensions ensure compatibility with various manufacturing processes and layouts.
Durable material protects components during storage and handling, ensuring reliability.
Low profile design makes it an ideal choice for compact electronic devices.
Adequate capacitance supports effective filtering and stabilization of signal integrity.
Data Line Filters EMIF02-USB05F2 attributes and parameters. Explore more Data Line Filters devices from STMicroelectronics
Approvals (V):
Capacitance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Material:
Packing Method:
Dimensions:
Sub-Category:
Terminal Finish:
Width (mm):
EMIF02-USB05F2 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
261
Deltrol Controls
Other Relays;
1N4148WS
Taiwan Semiconductor
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
Tak Cheong Electronics Holdings
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
NUF4001MUT2G
NUF4001MUT2G by Onsemi is a 4-function data line filter with 25 dB attenuation at 800 MHz. It operates b/w -40 to 85 °C and has a max DC resistance of 115 ohm. Ideal for applications requiring noise filtering in data lines, it comes in a compact surface mount package measuring L1.8xB1.2xH0.55 mm.
ACM2012-900-2P-T002
TDK
TDK's ACM2012-900-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.4A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics.
4400-076
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 10 A; Manufacturer Series: 4400-076; Terminal Finish: Silver (Ag); Mounting Type: PANEL MOUNT; JESD-609 Code: e4;
FLT007A0-SRZ
Ge Power Electronics
DATA LINE FILTER MODULE; Rated Current: 7 A; Approvals (V): UL; CSA; VDE; Packing Method: BAG; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel;
MI0603J680R-10
Laird Technologies
MI0603J680R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 68 OHM output impedance. It operates b/w -40 to 125 °C, has a DC resistance of 0.1 ohm, and supports frequencies from 25 MHz to 1000 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
MMZ2012S121AT000
MMZ2012S121AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.15 ohm and output impedance of 120 ohm, suitable for surface mount applications in electronics to suppress electromagnetic interference.
BLM31PG121SN1L
Murata Manufacturing
Murata Manufacturing's BLM31PG121SN1L is a chip bead data line filter with 2 terminals, rated for 3A current. It offers 120 OHM output impedance, -55 to 125 °C operating temperature range, and 0.025 ohm DC resistance. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM21PG221SH1D
BLM21PG221SH1D by Murata is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125°C. With a DC resistance of 0.045 ohm and output impedance of 220 OHM, it's ideal for data line filtering applications. Rated at 1.25 A, this ferrite chip offers surface mounting in compact dimensions of L2.0xB1.25xH0.85 mm.
MPZ1608S221ATD25
TDK's MPZ1608S221ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 2.2A current and 220 ohm output impedance. Operating b/w -55°C to 125°C, it's ideal for data line filtering in surface mount applications due to its compact dimensions of L1.6xB0.8xH0.8 mm.
LI0402C221R-10
Laird Technologies' LI0402C221R-10 is a chip bead data line filter with 220 OHM output impedance, 0.35 ohm max DC resistance, and 25-1000 MHz frequency range. Ideal for surface mount applications in electronics to suppress electromagnetic interference (EMI) and ensure signal integrity.
NFM21PC104R1E3D
Murata Manufacturing's NFM21PC104R1E3D is a data line filter with 1000 Mohm insulation resistance, 25V rated voltage, and 100000 uF capacitance. It is a feed through capacitor used in applications requiring noise filtering and signal conditioning.
DLW5BTM102SQ2L
Murata Manufacturing DLW5BTM102SQ2L is a Data Line Filter with 2 functions, rated at 50V and 2A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L5.0xB5.0xH2.35 mm. Ideal for applications requiring noise suppression in data lines.
BK1608TS102-TV
Taiyo Yuden
BK1608TS102-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated at 0.3A current. With dimensions of L1.6xB0.8xH0.8 (mm), it has an output impedance of 1000Ω and max operating temp of 125°C. Ideal for data line filtering in surface mount applications.
ACM2012-900-2P
TDK's ACM2012-900-2P is a 2-function data line filter with 4 terminals, rated voltage of 50V, and max operating temp of 85°C. Ideal for surface mount applications, it offers 0.19 ohm DC resistance, 0.4A rated current, and output impedance of 90 ohm.
B82789C0513N002
The TDK B82789C0513N002 is a data line filter with 2 functions, rated voltage of 80V, and inductance of 51uH. It operates b/w -55°C to 125°C and has a max DC resistance of 0.55 ohm. Ideal for applications requiring noise suppression in electronic circuits.
742792620
Wuerth Elektronik & Kg
Wurth Elektronik 742792620 is a FERRITE CHIP filter with 2 terminals, rated for 1.65A current. It operates b/w -55°C to 125°C, with dimensions of L1.6xB0.8xH0.8 (mm). Ideal for data line filtering in surface mount applications due to its low DC resistance of 0.15 ohm and output impedance of 100 ohm.
742792645
Wurth Elektronik 742792645 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for surface mount applications in electronics to achieve an output impedance of 470 OHM at a rated current of 1 A.
FBMJ3216HS480NT
Taiyo Yuden's FBMJ3216HS480NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85 °C, offering 48 OHM output impedance and 6A rated current. Ideal for surface mount applications, it measures L3.2XB1.6XH1.1 mm and is constructed with ferrite material for effective noise suppression at frequencies up to 100 MHz.
PBY201209T-600Y-N
Chilisin Electronics
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A; Output Impedance (ohm): 60 OHM;
SRF2012-900YA
Bourns
Bourns SRF2012-900YA is a Data Line Filter with 2 functions, rated at 50V and 0.4A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 125 °C, and has a compact size of L2.0xB1.2XH1.2 (mm). Ideal for applications requiring effective filtering in limited space like consumer electronics and communication devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EMIF04-1005M8
STMicroelectronics
DATA LINE FILTER; Maximum DC Resistance: 110 ohm; Rated Voltage: 10 V; Width (mm): 1.5; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e4;
EMIF02-USB03F2
EMIF02-USB03F2 by STMicroelectronics is a DATA LINE FILTER with 2 functions and 11 terminals. It has a capacitance of 20uF, operates b/w -40 to 85°C, and uses matte tin finish. Ideal for applications requiring IEC approvals in surface mount configurations.
EMIF06-MSD02N16
STMicroelectronics' EMIF06-MSD02N16 is a 16-terminal data line filter with max temp of 85°C and min temp of -30°C. It features nickel palladium gold finish, surface mounting type, and compact dimensions (L3.55xB1.25xH0.55 mm). Ideal for applications requiring effective filtering in compact spaces.
EMIF06-USD14F3
EMIF06-USD14F3 by STMicroelectronics is a data line filter with 6 functions and 15 terminals. It operates b/w -30°C to 85°C, with a capacitance of 12uF. This surface mount filter is ideal for applications requiring IEC and UL approvals.
EMIF06-MSD04F3
DATA LINE FILTER; Maximum DC Resistance: 44 ohm; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Mounting Type: SURFACE MOUNT; Height: .605 mm; Maximum Operating Temperature: 85 Cel;
EMIF01-10005W5
FERRITE CHIP; Length: 2 mm; Minimum Operating Temperature: -40 Cel; Output Impedance (ohm): 100 OHM; JESD-609 Code: e3; No. of Functions: 1;
EMIF04-1K030F3
DATA LINE FILTER; Capacitance: 24 uF; Mounting Type: SURFACE MOUNT; Width (mm): 1.17; Approvals (V): IEC; Minimum Operating Temperature: -40 Cel;
EMIF04-EAR02M8
DATA LINE FILTER; Packing Method: TR; Dimensions: L1.75XB1.55XH0.6 (mm)/L0.069XB0.061XH0.024 (inch); JESD-609 Code: e3; Approvals (V): UL; IEC; Length: 1.75 mm;
EMIF03-SIM02M8
EMIF03-SIM02M8 by STMicroelectronics is a DATA LINE FILTER with 3 functions and 8 terminals. It has a capacitance of 17uF, operates b/w -40 to 85°C, and is approved by IEC. Ideal for surface mount applications in various electronic devices.
EMIF02-MIC02F1
FERRITE CHIP; Minimum Operating Temperature: -40 Cel; Length: 1.57 mm; Capacitance: 16 uF; Dimensions: L1.57XB1.07XH0.65 (mm); Output Impedance (ohm): 470 OHM;
EMIF01-TV02F3
DATA LINE FILTER; Maximum DC Resistance: 75 ohm; Mounting Type: SURFACE MOUNT; No. of Functions: 1; Capacitance: 330 uF; Length: .89 mm;
EMIF02-MIC02F3
DATA LINE FILTER; Maximum DC Resistance: 470 ohm; Approvals (V): IEC; Dimensions: L1.17XB0.77XH0.605 (mm)/L0.046XB0.03XH0.024 (inch); Length: 1.17 mm; Width (mm): 0.77;
EMIF02-MIC01F2
DATA LINE FILTER; Length: 1.92 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Height: .65 mm; No. of Functions: 2;
EMIF01-TV01F3
DATA LINE FILTER; Maximum DC Resistance: 75 ohm; Capacitance: 30 uF; No. of Terminals: 4; Package Material: PLASTIC; Mounting Type: SURFACE MOUNT;
EMIF02-MIC02F2
DATA LINE FILTER; Maximum DC Resistance: 517 ohm; Package Material: PLASTIC; Height: .65 mm; Maximum Operating Temperature: 85 Cel; Dimensions: L1.42XB0.92XH0.65 (mm)/L0.056XB0.036XH0.026 (inch);
EMIF01-10018W5
FERRITE CHIP; Length: 2.2 mm; Width (mm): 1.35; Maximum Operating Temperature: 85 Cel; Packing Method: TAPE AND REEL; Capacitance: 180 uF;
EMIF02-MIC03C2
DATA LINE FILTER; Maximum DC Resistance: 68 ohm; No. of Functions: 2; Capacitance: 100 uF; Width (mm): 1.07; Minimum Operating Temperature: -40 Cel;
EMIF010-COM01F2
DATA LINE FILTER; Maximum DC Resistance: 220 ohm; No. of Functions: 10; Capacitance: 45 uF; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT;
EMIF01-1003M3
DATA LINE FILTER; Maximum DC Resistance: 100 ohm; Width (mm): 0.6; Minimum Operating Temperature: -40 Cel; Height: .5 mm; Mounting Type: SURFACE MOUNT;
EMIF02-02OABRY
DATA LINE FILTER; Width (mm): 3.05; Length: 3.05 mm; No. of Functions: 1; Mounting Type: SURFACE MOUNT; Height: .9 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved