Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EMIF02-AV01F3 by STMicroelectronics is a surface mount data line filter with a max operating temp of 85 °C and min of -40°C. It features two functions, 3.2 µF capacitance, and an 18 Ω max DC resistance. Ideal for protecting sensitive electronics in various applications.
Median Price
-
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Cyclops Electronics Ltd
Zilex Electronics Inc.
Vyrian
Lantek
Digiode
Prism Electronics
Anansix
Native Components
$0.214
$0.205
Northwest PG Solutions
$0.235
$0.208
IDEA Electronic Components Group
$1.979
$1.781
MKK Technologies
$3.721
DigiPath Technology Company
AZTECH Wire
$21.050
RC Electronics
Kepictronics
Perfect Parts
Authorized Procurement Solutions
S.R.D Solutions
GreenTree Electronics
Corphita
A-Z Elektronik GmbH
Assy Fe
Parana Technologies
$2.366
Meets international safety and quality standards, ensuring reliability in various applications.
Versatile design that supports multiple functions, enhancing its usability in diverse scenarios.
Specifically designed to filter data lines, reducing electromagnetic interference for improved signal integrity.
High-temperature tolerance allows for reliable operation in demanding environments.
Excellent low-temperature performance makes it suitable for extreme conditions.
Compact size ensures it can fit into tight spaces in modern electronic designs.
Low resistance contributes to efficient performance, minimizing power loss in data transmission.
Short length helps integrate easily into space-constrained applications.
Convenient packaging allows for efficient placement on automated assembly lines.
Surface mount design enables high-density circuit board layouts, saving space and simplifying assembly.
Precise dimensions make it ideal for compact electronic applications.
Durable plastic offers good protection against environmental factors.
Low profile allows for integration into slim devices without compromising performance.
Sufficient capacitance value provides effective filtering, enhancing performance of data lines.
Data Line Filters EMIF02-AV01F3 attributes and parameters. Explore more Data Line Filters devices from STMicroelectronics
Approvals (V):
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Material:
Packing Method:
Dimensions:
Sub-Category:
Width (mm):
EMIF02-AV01F3 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Device OBS 2/Jun/2017
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
KSZ9031RNXIC
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS3203F
Idec
ROTARY SWITCH;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Secos
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
2773021447
Fair-rite Products
Fair-rite Products' 2773021447 is a FERRITE BEAD filter with 2 terminals, matte tin finish, and 70 OHM impedance. Ideal for data line filtering in surface mount applications due to its compact dimensions of L9.6XB3.05XH2.85 mm.
MPZ1608S601ATA00
TDK
TDK's MPZ1608S601ATA00 is a 0603 chip bead data line filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.15 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
MI0603J601R-10
Laird Technologies
Laird Technologies' MI0603J601R-10 is a chip bead data line filter with 2 terminals, operating from -40 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.2 ohm and an output impedance of 600 ohm for frequencies ranging from 25MHz to 1000MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 1A and is commonly used in electronic devices requiring noise suppression on data lines.
CM4440Z121R-10
The Laird Technologies CM4440Z121R-10 is a Data Line Filter with 3 functions, rated at 100V and 20A. It operates b/w -40°C to 125°C, with a max DC resistance of 0.001 ohm. This filter is ideal for applications requiring noise suppression in data lines.
BNX022-01
Murata Manufacturing
Murata Manufacturing's BNX022-01 is a 3-function data line filter with 500 Mohm insulation resistance and 50 V rated voltage. With max insertion loss of 35 dB, it operates b/w -40 to 125 °C and has a rated current of 10 A. Ideal for surface mount applications requiring effective noise filtering in data lines.
BLM18EG221SN1
Murata Manufacturing's BLM18EG221SN1 is a FERRITE CHIP data line filter with 220 OHM output impedance, 2A rated current, and -55 to 125°C operating temperature range. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.
BL02RN2R1M2B
Murata Manufacturing's BL02RN2R1M2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range, and Through Hole Mount. Ideal for noise suppression in electronic circuits.
P0429NLT
Pulse Electronics
Pulse Electronics P0429NLT is a data line filter with 2 functions, AEC-Q200 screening level. It has inductance of 810uH, rated current of 9.7A, and max operating temp of 120°C. Ideal for automotive applications due to its surface mounting type and compact dimensions (L30.99xB25.4xH12.7 mm).
NFM41CC223R2A3L
NFM41CC223R2A3L by Murata Manufacturing is a data line filter with a rated voltage of 100V and capacitance of 22000uF. It has a min insulation resistance of 10000 Mohm and is commonly used in applications requiring noise suppression in electronic circuits.
ACM2012-121-2P-T002
TDK's ACM2012-121-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.37A. With dimensions of L2.0xB1.2xH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics, ensuring reliable performance from -40 to 85 °C temperatures.
ECMF4-20A42N10
STMicroelectronics
ECMF4-20A42N10 by STMicroelectronics is a data line filter with 4 functions and 10 terminals. It operates in temperatures ranging from -55°C to 125°C and has dimensions of 2.25mm x 1.4mm x 0.5mm. It is commonly used for IEC-approved applications requiring surface mounting type.
B82790C0113N201
TDK B82790C0113N201 is an 80V data line filter with 11uH inductance and 0.08 ohm DC resistance. It has UL and IEC approvals, suitable for applications requiring a 50 OHM output impedance in surface mount configurations.
MMZ1608R102ATA00
TDK MMZ1608R102ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C and min of -55°C, with width of 0.8mm and length of 1.6mm. Ideal for data line filtering applications due to its ferrite construction, output impedance of 1000Ω, and rated current of 0.4A.
LI0805G301R-10
Steward
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .7 A; No. of Functions: 1; Terminal Finish: Tin (Sn); Output Impedance (ohm): 300 OHM;
BLM15EG221SN1D
BLM15EG221SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 0.5A, and output impedance of 220 ohm. It operates b/w -55 to 125 °C, suitable for applications requiring filtering in the frequency range of 100-1000 MHz. This surface mount ferrite chip is compact at L1.0xB0.5xH0.5 mm and ideal for noise suppression in electronic circuits.
BLM31SN500SZ1L
Murata's BLM31SN500SZ1L is a FERRITE CHIP filter with 2 terminals, rated for 12A current. It operates b/w -55°C to 150°C, with max DC resistance of 0.0016 ohm. Ideal for data line filtering in automotive applications due to AEC-Q200 screening and compact dimensions of L3.2xB1.6xH1.1 mm.
ACT1210-101-2P-TL00
TDK's ACT1210-101-2P-TL00 is a data line filter with 10 Mohm insulation resistance, 80V rated voltage, and 100uH inductance. It has 2 functions and operates b/w -40 to 150 °C, making it ideal for automotive applications meeting AEC-Q200 standards.
BLM15PX330SN1D
Murata Manufacturing's BLM15PX330SN1D is a FERRITE CHIP data line filter with 33 OHM output impedance, 1.7A rated current, and -55 to 125 °C operating temperature range. Ideal for surface mount applications in electronics to suppress electromagnetic interference.
LFBK2125HS470-T
Taiyo Yuden
LFBK2125HS470-T by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0XB1.25XH0.85 (mm), it is ideal for surface mount applications requiring an output impedance of 47 OHM and rated current of 1 A.
BLM21PG221SN1J
Murata Manufacturing's BLM21PG221SN1J is an 0805 chip bead filter with 2 terminals, operating from -55 to 125 °C. With a width of 1.25mm and length of 2mm, it offers an output impedance of 220 ohm for data line filtering applications at frequencies ranging from 100 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EMIF04-1005M8
DATA LINE FILTER; Maximum DC Resistance: 110 ohm; Rated Voltage: 10 V; Width (mm): 1.5; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e4;
EMIF02-USB03F2
EMIF02-USB03F2 by STMicroelectronics is a DATA LINE FILTER with 2 functions and 11 terminals. It has a capacitance of 20uF, operates b/w -40 to 85°C, and uses matte tin finish. Ideal for applications requiring IEC approvals in surface mount configurations.
EMIF06-MSD02N16
STMicroelectronics' EMIF06-MSD02N16 is a 16-terminal data line filter with max temp of 85°C and min temp of -30°C. It features nickel palladium gold finish, surface mounting type, and compact dimensions (L3.55xB1.25xH0.55 mm). Ideal for applications requiring effective filtering in compact spaces.
EMIF06-USD14F3
EMIF06-USD14F3 by STMicroelectronics is a data line filter with 6 functions and 15 terminals. It operates b/w -30°C to 85°C, with a capacitance of 12uF. This surface mount filter is ideal for applications requiring IEC and UL approvals.
EMIF06-MSD04F3
DATA LINE FILTER; Maximum DC Resistance: 44 ohm; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Mounting Type: SURFACE MOUNT; Height: .605 mm; Maximum Operating Temperature: 85 Cel;
EMIF01-10005W5
FERRITE CHIP; Length: 2 mm; Minimum Operating Temperature: -40 Cel; Output Impedance (ohm): 100 OHM; JESD-609 Code: e3; No. of Functions: 1;
EMIF04-1K030F3
DATA LINE FILTER; Capacitance: 24 uF; Mounting Type: SURFACE MOUNT; Width (mm): 1.17; Approvals (V): IEC; Minimum Operating Temperature: -40 Cel;
EMIF04-EAR02M8
DATA LINE FILTER; Packing Method: TR; Dimensions: L1.75XB1.55XH0.6 (mm)/L0.069XB0.061XH0.024 (inch); JESD-609 Code: e3; Approvals (V): UL; IEC; Length: 1.75 mm;
EMIF03-SIM02M8
EMIF03-SIM02M8 by STMicroelectronics is a DATA LINE FILTER with 3 functions and 8 terminals. It has a capacitance of 17uF, operates b/w -40 to 85°C, and is approved by IEC. Ideal for surface mount applications in various electronic devices.
EMIF02-MIC02F1
FERRITE CHIP; Minimum Operating Temperature: -40 Cel; Length: 1.57 mm; Capacitance: 16 uF; Dimensions: L1.57XB1.07XH0.65 (mm); Output Impedance (ohm): 470 OHM;
EMIF01-TV02F3
DATA LINE FILTER; Maximum DC Resistance: 75 ohm; Mounting Type: SURFACE MOUNT; No. of Functions: 1; Capacitance: 330 uF; Length: .89 mm;
EMIF02-MIC02F3
DATA LINE FILTER; Maximum DC Resistance: 470 ohm; Approvals (V): IEC; Dimensions: L1.17XB0.77XH0.605 (mm)/L0.046XB0.03XH0.024 (inch); Length: 1.17 mm; Width (mm): 0.77;
EMIF02-MIC01F2
DATA LINE FILTER; Length: 1.92 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Height: .65 mm; No. of Functions: 2;
EMIF01-TV01F3
DATA LINE FILTER; Maximum DC Resistance: 75 ohm; Capacitance: 30 uF; No. of Terminals: 4; Package Material: PLASTIC; Mounting Type: SURFACE MOUNT;
EMIF02-MIC02F2
DATA LINE FILTER; Maximum DC Resistance: 517 ohm; Package Material: PLASTIC; Height: .65 mm; Maximum Operating Temperature: 85 Cel; Dimensions: L1.42XB0.92XH0.65 (mm)/L0.056XB0.036XH0.026 (inch);
EMIF01-10018W5
FERRITE CHIP; Length: 2.2 mm; Width (mm): 1.35; Maximum Operating Temperature: 85 Cel; Packing Method: TAPE AND REEL; Capacitance: 180 uF;
EMIF02-MIC03C2
DATA LINE FILTER; Maximum DC Resistance: 68 ohm; No. of Functions: 2; Capacitance: 100 uF; Width (mm): 1.07; Minimum Operating Temperature: -40 Cel;
EMIF010-COM01F2
DATA LINE FILTER; Maximum DC Resistance: 220 ohm; No. of Functions: 10; Capacitance: 45 uF; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT;
EMIF01-1003M3
DATA LINE FILTER; Maximum DC Resistance: 100 ohm; Width (mm): 0.6; Minimum Operating Temperature: -40 Cel; Height: .5 mm; Mounting Type: SURFACE MOUNT;
EMIF02-02OABRY
DATA LINE FILTER; Width (mm): 3.05; Length: 3.05 mm; No. of Functions: 1; Mounting Type: SURFACE MOUNT; Height: .9 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved