Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Maximum DC Resistance: .08 ohm; Rated Current: 1.5 A; Maximum Operating Temperature: 125 Cel; Output Impedance (ohm): 19 OHM; No. of Functions: 1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters MI1206K190R-00 attributes and parameters. Explore more Data Line Filters devices from Steward
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
MI1206K190R-00 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
Fairchild Semiconductor
DS18B20Z/T&R
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Bytesonic Electronics
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Hitano Enterprise
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
DLW5BTN501SQ2L
Murata Manufacturing
DLW5BTN501SQ2L by Murata Mfg is a Data Line Filter with 4 terminals, rated for 50V and 4A. It offers 10 Mohm min insulation resistance, operates b/w -40 to 85 °C, and has a max DC resistance of 0.019 ohm. Ideal for applications requiring output impedance of 500 OHM in surface mount configurations.
MMZ2012S601ATD25
TDK
TDK MMZ2012S601ATD25 is a chip bead data line filter with 2 terminals. It offers max operating temp of 125°C, min of -55°C, and DC resistance of 0.3 ohm. Ideal for automotive applications due to AEC-Q200 screening level and compact dimensions L2.0xB1.25XH0.85 (mm).
NFM21PC224R1C3D
Murata Manufacturing's NFM21PC224R1C3D is a data line filter with 16V rated voltage, 220000uF capacitance, and 2A rated current. It features a feed through capacitor design for noise suppression in electronic circuits. Ideal for surface mount applications where high insulation resistance and temperature tolerance are required.
DLW5BTM102SQ2L
Murata Manufacturing DLW5BTM102SQ2L is a Data Line Filter with 2 functions, rated at 50V and 2A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L5.0xB5.0xH2.35 mm. Ideal for applications requiring noise suppression in data lines.
744273801
Wuerth Elektronik & Kg
Wurth Elektronik 744273801 is a Data Line Filter with 2 functions, rated at 80V. It has an inductance of 9uH and operates b/w -40 to 125°C. Ideal for applications requiring filtering of data lines, it offers low DC resistance of 0.011 ohm and output impedance of 800 OHM.
742792695
Wurth Elektronik 742792695 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a max frequency of 110 MHz. Ideal for applications requiring noise suppression in electronic circuits.
7427927161
Wurth Elektronik 7427927161 is a FERRITE CHIP filter with 2 terminals, rated for 0.51A current. It operates b/w -55 to 125 °C and has a max DC resistance of 0.56 ohm. Ideal for data line filtering in surface mount applications due to its compact dimensions of L1.0xB0.5xH0.5 mm.
PA3747.505NL
Pulse Electronics
PA3747.505NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 3330 uH inductance. It operates b/w -40 to 125 °C and has a max DC resistance of 0.1035 ohm. Ideal for applications requiring high output impedance like automotive electronics.
BLM21AG121SN1D
Murata Manufacturing's BLM21AG121SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.09 ohm and output impedance of 120 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications due to its compact size and surface mounting type.
74279274
Wurth Elektronik 74279274 is a multi-layer FERRITE CHIP filter with dimensions of L1.0XB0.5XH0.5 (mm). It operates b/w -55 to 125 °C, has a DC resistance of 0.25 ohm, and an output impedance of 30 OHM. Ideal for data line filtering applications up to 500 MHz frequency range.
MI0603L301R-10
Laird Technologies
MI0603L301R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L1.6XB.8XH.8 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 300 OHM. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 0.1 ohm and can handle up to 2 A rated current.
BLM31AF700SN1L
Murata Manufacturing's BLM31AF700SN1L is a Ferrite Chip Data Line Filter with 2 terminals, 70 Ohm output impedance, and 0.15 ohm max DC resistance. It operates b/w -55°C to 125°C, suitable for surface mount applications in various electronic devices requiring noise suppression.
BLA2ABD601SN4D
Murata Manufacturing's BLA2ABD601SN4D is a FERRITE CHIP data line filter with 4 functions and 8 terminals. It has a max operating temperature of 125°C and min of -55°C, with dimensions L2.0xB1.0xH0.5 (mm). Ideal for applications requiring output impedance of 600 ohm, rated current 0.1 A, and surface mounting type.
NFM21CC471R1H3D
Murata Manufacturing's NFM21CC471R1H3D is a data line filter with 470uF capacitance, 50V rated voltage, and 1A rated current. It features a feed through capacitor design for high insulation resistance applications. Ideal for surface mount installations in various electronic devices operating b/w -55°C to 125°C.
BLM21PG221SN1
Murata Manufacturing's BLM21PG221SN1 is a FERRITE CHIP filter with 2 terminals, rated for 2A current. With dimensions of L2.0XB1.25XH0.85 (mm), it offers an output impedance of 220 ohm and max DC resistance of 0.05 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C in surface mount configurations.
NFA31CC102R1E4D
NFA31CC102R1E4D by Murata Manufacturing is a data line filter with 4 functions and a rated voltage of 25V. It has a capacitance of 1000uF and is commonly used in applications requiring noise suppression and EMI filtering.
MMZ2012R102ATD25
MMZ2012R102ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. It has a max operating temperature of 125°C and min of -55°C, ideal for automotive applications. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.3 ohm and output impedance of 1000 ohm, suitable for surface mounting type.
DLM0NSM900HY2D
Murata Manufacturing's DLM0NSM900HY2D data line filter has 2 functions, rated at 5V with a max temp of 85°C. With a min insulation resistance of 10 Mohm, it is ideal for applications requiring noise filtering in data transmission systems.
MMZ2012Y202B
The TDK MMZ2012Y202B is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, matte tin finish, and dimensions of L2.0xB1.25xH0.85 (mm). With a max operating temperature of 125°C and rated current of 0.4A, it is ideal for surface mount applications requiring an output impedance of 2000 ohm.
MMZ1608B601C
The TDK MMZ1608B601C is a chip bead data line filter with FERRITE CHIP technology. It has a max operating temperature of 125°C and min of -55°C, with a rated current of 0.5A. Ideal for surface mount applications requiring an output impedance of 600 ohms in compact dimensions of L1.6xB0.8xH0.6 mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Steward
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved