Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MK17-C-1 by Standex-Meder Electronics is a proximity sensor with dimensions of 2.1" x 2.1mm x 8.5mm, operating b/w -40°C to 130°C. It has a response time of 100us and features an epoxy resin housing for surface mount applications.
Median Price
$1.526
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
1k+ parts
$1.380
10k+ parts
$1.290
Verical
$1.673
$1.571
Electro Sonic
$1.830
$1.360
IBS Electronics
$1.935
$1.809
Vyrian
Nova Conductors
Aztec Data Supply Inc.
$1.703
Continental Prestige Electronics
Argo Parts USA
Aranea Global
The compact size of the body allows for easy installation in tight spaces.
This sensor type provides accurate detection and reliable operation.
The low profile design makes it suitable for applications where space is limited.
The rectangular shape allows for easy integration into existing systems.
With a high maximum operating temperature, this sensor is suitable for a wide range of environments.
The fast response time ensures quick and accurate detection of objects.
The low minimum operating temperature allows for use in cold environments.
The epoxy resin housing provides durability and protection against environmental factors.
The small size of the body makes this sensor versatile and easy to install in various applications.
The solder termination type ensures a secure and reliable connection.
The surface mount feature allows for easy installation on PCBs or other surfaces.
Proximity Sensors MK17-C-1 attributes and parameters. Explore more Proximity Sensors devices from Standex-Meder Electronics
Body Width:
Body Height:
Body Length/Diameter:
Housing:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape or Style:
Response Time:
Sensors or Transducers Type:
Termination Type:
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sensitron Semiconductor
EU2B-YS3203C
Idec
ROTARY SWITCH;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
59065-3-V-05-D
Littelfuse
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Maximum Operating Current: 250 mA; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -40 Cel; Termination Type: CABLE;
XS518B1PBM12
Schneider Electric Sa
Schneider Electric Sa's XS518B1PBM12 is an inductive proximity sensor with PNP, NC output. It operates b/w -25°C to 70°C, suitable for industrial automation applications. With a cylindrical body of 18mm diameter and 50.2mm height, it requires a supply voltage ranging from 12V to 24V.
MPS45WGW
C & K Components
MPS45WGW by C & K Components is a proximity sensor with Hall effect technology. It features a body width of 12.7mm, height of 6.98mm, and operates b/w -40°C to 100°C. Ideal for panel mounting applications in various industries requiring precise proximity sensing capabilities.
ATS616LSGTN-T
Allegro MicroSystems
ATS616LSGTN-T by Allegro MicroSystems is a proximity sensor with 3.5-24V supply, 200-400mV analog output, and 3us response time. Ideal for applications requiring precise distance measurement in industrial automation systems.
RE27-SA05L
Sick Ag
RE27-SA05L by Sick Ag is a 25" proximity sensor with magnetic transducer type, ideal for industrial automation. Featuring a rectangular shape and glass-fiber reinforced PPS housing, it operates b/w -20°C to 60°C temperatures. With digital output and cable termination, this sensor is suitable for flange mounting applications.
H1612-009
NXP Semiconductors
PROXIMITY SENSOR,HALL EFFECT; Output Type: ANALOG CURRENT; Package Shape or Style: ROUND; Additional Features: TTL COMPATIBLE; Housing: STAINLESS STEEL; Minimum Measurement Range (mm): .12 mm;
59030-03-T-02-F
PROXIMITY SENSOR,PHOTOELECTRIC;
59060-2-S-04-A
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -20 Cel; Output Interface Type: 2-WIRE INTERFACE; Termination Type: CABLE;
MPR083EJ
PROXIMITY SENSOR,CAPACITIVE; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Minimum Supply Voltage: .041 V; Maximum Supply Voltage: 1.8 V; Termination Type: SOLDER;
QS186E
Hans Turck & Kg
BI2-G12-AP6X-H1141
PROXIMITY SENSOR,INDUCTIVE;
APDS-9930-140
Broadcom
Broadcom's APDS-9930-140 is a proximity sensor with 3% accuracy, operating at -30 to 85°C. It features a 2-wire interface, digital current output, and operates b/w 2.2V to 3.6V. Ideal for photoelectric applications due to its small size of 3.94mm x 1.35mm x 2.36 inch and surface mount capability.
9151710022
Standex-meder Electronics
The Standex-Meder Electronics 9151710022 is a proximity sensor with body dimensions of 16mm x 2.5mm x 2.5 inch. It operates in temperatures ranging from -40°C to 130°C, housed in mineral-filled epoxy for durability. Ideal for applications requiring photoelectric proximity sensing capabilities.
MK17-C-1
59070-2-S-05-F
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Output Interface Type: 2-WIRE INTERFACE; Body Height: 38.1 mm; Maximum Operating Temperature: 105 Cel; Body Length/Diameter: 8 mm;
BC5-S185-AN4X
BC5-S185-AN4X by Hans Turck & KG is a 3-wire capacitive proximity sensor with NPN output, suitable for applications requiring detection in harsh environments. With a supply voltage range of 10V to 65V and operating temperatures from -25°C to 70°C, it offers reliable performance. The sensor's compact barrel shape, plastic housing, and cable termination make it ideal for industrial automation systems.
MK03-1A66C-500W
MK03-1A66C-500W by Standex-Meder Electronics is a proximity sensor with a body height of 25.5mm and response time of 100us. It operates b/w -20°C to 85°C, housed in PBT glass fibre reinforced material. Ideal for applications requiring precise detection in industrial automation systems.
EC3025TBAPL-6
Carlo Gavazzi Holding Ag
PROXIMITY SENSOR,CAPACITIVE;
59145-3-U-02-E
VCNL4040M3OE-H3
Vishay Intertechnology
PROXIMITY SENSOR,PHOTOELECTRIC; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MK17-B-2
Meder Electronic Ag
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 8.5 mm; Minimum Operating Temperature: -40 Cel; Body Width: 2.1 inch;
Standex-Meder Electronics
MK17-B-2 by Standex-Meder Electronics is a 2.1" proximity sensor with a response time of 100 us. Ideal for surface mount applications, it operates b/w -40°C to 130°C temperatures. Featuring epoxy resin housing, this rectangular sensor is perfect for photoelectric sensing needs.
MK17-B-1
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 130 Cel; Body Height: 2.1 mm; Body Length/Diameter: 8.5 mm;
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Housing: EPOXY RESIN; Body Width: 2.1 inch; Minimum Operating Temperature: -40 Cel;
MK17-B-2BULK
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 8.5 mm; Body Width: 2.1 inch; Housing: EPOXY RESIN;
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Housing: EPOXY RESIN; Body Width: 2.1 inch; Body Length/Diameter: 8.5 mm;
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 2.1 inch; Maximum Operating Temperature: 130 Cel; Body Length/Diameter: 8.5 mm;
MK17-C-2
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Body Height: 2.1 mm; Housing: EPOXY RESIN;
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Housing: EPOXY RESIN; Response Time: 100 us; Minimum Operating Temperature: -40 Cel;
MK17-B-3
MK17-B-3 by Standex-Meder Electronics is a proximity sensor with dimensions of 2.1" x 2.1mm x 8.5mm, operating b/w -40°C to 130°C. It has a response time of 100us and uses epoxy resin housing for surface mount applications in various industries.
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 2.1 inch; Minimum Operating Temperature: -40 Cel; Housing: EPOXY RESIN;
MK17-B-1BULK
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Minimum Operating Temperature: -40 Cel; Body Width: 2.1 inch; Body Height: 2.1 mm;
MK17-C-2BULK
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 8.5 mm; Body Width: 2.1 inch; Body Height: 2.1 mm;
MK17-C-3BULK
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Housing: EPOXY RESIN; Minimum Operating Temperature: -40 Cel; Body Height: 2.1 mm;
MK17-C-3
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Termination Type: SOLDER; Response Time: 100 us;
MK17-B-3BULK
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Housing: EPOXY RESIN; Minimum Operating Temperature: -40 Cel;
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 130 Cel;
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Maximum Operating Temperature: 130 Cel; Body Height: 2.1 mm;
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Housing: EPOXY RESIN; Maximum Operating Temperature: 130 Cel;
MK17-E-1
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 130 Cel; Body Width: 2.1 inch; Housing: EPOXY RESIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved