Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Median Price
$1.730
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Farnell
1+ parts
$1.310
100+ parts
$1.220
1k+ parts
-
10k+ parts
$1.170
Arrow
$1.568
$1.514
DigiKey
$1.545
Mouser Electronics
$1.550
$1.320
Newark
$1.780
$1.430
Element14
$2.460
$2.050
$2.030
Adafruit Industries
$11.532
$10.494
$9.456
Master Electronics
$1.510
$1.290
Verical
$1.830
$1.707
RS (Exports)
Nova Conductors
$1.380
Maritex
$1.564
$1.202
Bristol Electronics
$2.700
Chip Stock
Rotakorn
Vyrian
IBS Electronics
$5.132
$1.819
ComSIT Distribution GmbH
Electro Sonic
$1.280
$1.250
SPM Sales
Amalfi Trading
Semi Source
Sensible Micro Corp
Connect4Technologies Inc.
Prism Electronics
NexGen Digital
Ampacity Inc.
$0.940
Semicontronic
$0.916
$0.912
Component Stockers USA
$1.260
Aranea Global
$1.352
$1.298
Argo Parts USA
Corohmni
Continental Prestige Electronics
$1.710
Advanced Electronics
Aztec Data Supply Inc.
$16.168
Perfect Parts
RC Electronics
$1.410
Eastek
Kepictronics
Lixinc
QUARKTWIN TECHNOLOGY LTD
Epart123
$2.500
Futuretech Components
GreenTree Electronics
Metaverse IC Inc.
iodParts Technologies Inc.
$1.024
S.R.D Solutions
Allen Electronics Distributors
Fulton Briggs Corp.
Robosynatics
$10.929
Lucentia Tech
Authorized Procurement Solutions
Network Interfaces USB3300-EZK-TR attributes and parameters. Explore more Network Interfaces devices from Standard Microsystems
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
USB3300-EZK-TR Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Goodwork Semiconductor
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
Plessey Semiconductors Discrete Components Div
Other Transistors;
KSZ8041FTLI-TR
Microchip's KSZ8041FTLI-TR is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a 48-terminal flatpack package suitable for industrial applications. With a supply voltage of 3.3V and low current draw of 58.3mA, it's ideal for network interfaces in various electronic devices.
MAX13054ESA+T
Analog Devices
MAX13054ESA+T by Analog Devices is a CAN transceiver with 1Mbps data rate, operating at -40 to 85°C. It has 8 terminals, matte tin finish, and supports supply voltages of 3.3V and 5V. Ideal for industrial applications requiring reliable network interfaces in compact spaces.
TJA1052IT/1
NXP Semiconductors
NXP Semiconductors' TJA1052IT/1 is a 16-terminal network interface IC with AEC-Q100 screening for automotive applications. It operates at 1 Mbps data rate, supports dual terminal position, and has a nominal voltage of 5V. The small outline package style measures 10.3mm x 7.5mm x 2.65mm and can withstand temperatures from -40°C to 125°C, making it ideal for automotive communication systems.
LAN8742A-CZ
LAN8742A-CZ by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 0-70°C. Features 24 terminals in a square chip carrier package for surface mount applications. Suitable for telecom and networking devices requiring TS 16949 screening level.
KSZ8041FTLI
KSZ8041FTLI by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at -40 to 85°C. Features 48 terminals in a thin profile flatpack package. Ideal for industrial applications requiring reliable network interfaces.
MAX3051ESA+T
Analog Devices' MAX3051ESA+T is a BICMOS technology network interface IC with 8 terminals, operating at 3.3V. It offers a data rate of 1 Mbps and is ideal for industrial applications requiring interface circuitry in small outline packages.
XISOW1044DFMR
XISOW1044DFMR by Texas Instruments is a CAN FD transceiver with 5 Mbps data rate. It operates in automotive temperature range (-40 to 125 °C) and has 20 terminals in small outline package. Ideal for automotive networking applications due to its high-speed communication capabilities.
LAN8710A-EZC
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SN65HVD1050MDREP
SN65HVD1050MDREP by Texas Instruments is a Network Interface IC with 1Mbps data rate, operating at -55 to 125°C. It features 8 terminals, small outline package style, and AEC-Q100 screening level. Ideal for military applications requiring a 5V supply voltage and dual terminal position.
SN65HVD235D
SN65HVD235D by Texas Instruments is a Network Interface IC with 1 channel, operating at 1 Mbps data rate. It has a supply voltage of 3.3V and low supply current of 6mA, suitable for automotive applications due to its temperature grade. The package style is small outline with gull wing terminals, making it ideal for surface mount designs in harsh environments.
TLE7250GXUMA1
Infineon Technologies
TLE7250GXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 5V supply voltage, and 1.27mm terminal pitch. It is designed for telecom applications requiring small outline package style and dual terminal position for compact designs.
TLE9252VLCXUMA1
INTERFACE CIRCUIT; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 2A; JESD-609 Code: e3;
KSZ8895MQXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
DP83848YB/NOPB
DP83848YB/NOPB by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate, operating at 3.3V. It features a flatpack package style, quad terminal position, and -40 to 125 °C temperature range. Ideal for automotive applications due to its CMOS technology and compact design.
TJA1042T/3/1J
NXP Semiconductors' TJA1042T/3/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminals, and supports a 5V supply voltage. Ideal for interface circuits in automotive applications due to its robust design and high-temperature tolerance.
DP83848HSQ/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: QCCN; Package Shape: SQUARE;
ATA6561-GBQW-N
ATA6561-GBQW-N by Microchip: CAN FD transceiver with 5 Mbps data rate, 70 mA supply current, and 5V nominal voltage. Ideal for automotive applications due to TS16949 screening level and -40 to 150 °C operating temperature range.
TJA1050T/N1
NXP Semiconductors' TJA1050T/N1 is a network interface IC with 8 terminals, operating at 5V. It features a data rate of 1 Mbps and is designed for automotive applications. With a temperature range from -40 to 125°C, this CMOS technology-based chip offers low supply current at 0.075 mA.
LAN8720A-CP
LAN8720A-CP by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features a compact square package style and low power consumption of 54mA, suitable for network interfaces in commercial applications requiring reliable connectivity at temperatures ranging from 0 to 85°C.
DP83822IRHBR
DP83822IRHBR by Texas Instruments is an Ethernet transceiver with 4 transceivers, supporting data rate of 100000 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage of 1.8 V. Suitable for network interfaces, it comes in a square chip carrier package with 32 terminals and surface mount capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
USB3320C-EZK-TR
USB3320C-EZK
USB3320C-EZK by Standard Microsystems is a surface mount network interface with 1 function and 32 terminals. It has a square package shape, very thin profile, and operates in industrial temperature range (-40 to 85 °C). It is commonly used as an interface circuit for telecom applications.
USB3300-EZK
USB3340-EZK-TR
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: QCCN; Package Shape: SQUARE;
USB3343-CP
ETHERNET TRANSCEIVER;
USB3318C-CP-TR
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
USB3317C-CP-TR
USB3343-CP-TR
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
USB3315C-CP-TR
USB3341-CP-TR
USB3346-CP-TR
USB3347-CP-TR
USB3250-ABZJ
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;
USB3317-CP-TR
USB3316C-CP-TR
USB3319C-CP-TR
USB3316B-CP-TR
USB3300I-EZK-TR
USB3300I-EZK
USB3315-CP-TR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved