Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Stancor Products' DSW-4120 is a 6VA power transformer with UL and CSA approvals. It operates b/w -40°C to 105°C, suitable for various applications requiring a max output current of 0.05A at 60Hz frequency.
Median Price
$20.522
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
< 1k
Master Electronics
1+ parts
$27.120
100+ parts
$23.780
1k+ parts
$20.590
10k+ parts
-
Verical
$13.923
$10.933
Electro Sonic
$11.030
$7.220
$6.580
Vyrian
IBS Electronics
$9.113
$8.307
Nova Conductors
Aztec Data Supply Inc.
$1.210
AZTECH Wire
$6.047
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
Assy Fe
Having UL and CSA approvals ensures that this power transformer meets the necessary safety standards and regulations, providing peace of mind to the user.
With an output current of 1.05 A, this power transformer can handle higher loads and provide more stable power output, making it suitable for various applications.
A volt-ampere rating of 6 VA indicates the power capacity of this transformer, making it suitable for powering small to medium-sized devices efficiently.
The maximum operating temperature of 105°C allows this transformer to operate under high temperature conditions without overheating, ensuring reliable performance.
With a minimum operating temperature of -40°C, this transformer can function in extreme cold environments, making it versatile and suitable for a wide range of applications.
Operating at a frequency of 60 Hz ensures compatibility with standard power systems, making this transformer a convenient choice for most setups.
Being a power transformer, this product is specifically designed to step up or step down voltage levels, making it essential for various electronic and electrical applications.
Power & Mains Transformers DSW-4120 attributes and parameters. Explore more Power & Mains Transformers devices from Stancor Products
Additional Features:
Approvals (V):
Manufacturer Series:
No. of Winding (Secondary):
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current-1:
Transformer Type:
Volt-Ampere Rating (VA):
DSW-4120 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.31.40.35
SB
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
Hy Electronic
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
T-1-81062
Acme Electric
POWER TRANSFORMER; Approvals (V): UL; CSA; Volt-Ampere Rating (VA): 100 VA; Output Current-1: 2.08 A; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1;
CTX110603-R
Cooper Electronic Technologies
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: CTX110603-R; Minimum Operating Temperature: 0 Cel; Length: 21 mm; Output Voltage-1: 1340 V;
1152
Amecon
TOROIDAL POWER TRANSFORMER; Volt-Ampere Rating (VA): 100 VA; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1; Output Current-1: 2.08 A;
FL30/18
Block Transformatoren-elektronik
FL30/18 by Block Transformatoren-elektronik is a 30 VA power transformer with dual 115V primary rating. It has two secondary windings, each providing 18 V output voltage. Approved by CSA, CUL, EAC, UL, and VDE, it operates at a max temperature of 40°C. Ideal for applications requiring reliable power conversion in compact spaces.
739
Hammond Manufacturing
The Hammond Manufacturing 739 power transformer has a 1610 VA rating, output voltage of 3500 V, and is CSA approved. Ideal for applications requiring a single primary input of 115V, chassis mount installation, and a center tap feature for versatile use in various power systems.
80-4
Bel Fuse
Bel Fuse's 80-4 is a power transformer with dimensions of 133.4mm X 108mm X 111.1mm. It has a center tap feature, isolation voltage of 1500V, and an output current of 4A. This transformer is suitable for chassis mount applications requiring a nominal operating frequency of 50/60Hz and a single primary rating of 115V.
STM1736611
Analog Devices
The Analog Devices STM1736611 is a 5 VA power transformer with 500V isolation voltage. Measuring L114.3xB50.8xH38.1 mm, it operates b/w -55°C to 105°C and outputs at 11.8V. Ideal for applications requiring reliable power conversion in compact spaces with a frequency of 400 Hz.
36-1
Signal Transformer
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 36; Center Tap Feature-1: YES; Output Current-2: 1 A; Height: 63.5 mm;
2104
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2104; Nominal Operating Frequency: 60 HZ; Output Current-1: 2.22 A; Volt-Ampere Rating (VA): 40 VA; No. of Winding (Secondary): 1;
1143
TOROIDAL POWER TRANSFORMER; Volt-Ampere Rating (VA): 100 VA; No. of Winding (Secondary): 1; Output Current-1: 6.67 A; Nominal Operating Frequency: 60 HZ;
TM5-5
Abbott Technologies
Abbott Technologies' TM5-5 is a 100 VA toroidal power transformer with an isolation voltage of 1000V. It operates at a max temperature of 90°C, outputting 14V at 7.14A for applications requiring reliable power conversion in aerospace and military equipment.
1021
TOROIDAL POWER TRANSFORMER; Output Current-1: 1.11 A; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 10 VA; Nominal Operating Frequency: 60 HZ;
166G28
The Hammond Manufacturing 166G28 is a Split Bobbin Power Transformer with 2000V isolation voltage, 0.5A output current, and 14VA Volt-Ampere rating. Ideal for applications requiring a single 115V primary rating, this transformer features a center tap feature, chassis mounting option, and operates at a nominal frequency of 60Hz.
ATB322524-0110-T000
TDK
ATB322524-0110-T000 by TDK is a POWER TRANSFORMER with an Isolation Voltage of 500V. It has compact dimensions of L3.2xB2.5xH2.4 (mm) and can operate b/w -40°C to 85°C. Ideal for surface mount applications in power and mains transformers due to its small size and high isolation voltage capability.
2210
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2210; Volt-Ampere Rating (VA): 160 VA; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ; Output Current-1: 5.33 A;
1290
TOROIDAL POWER TRANSFORMER; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 750 VA; No. of Winding (Secondary): 1; Output Current-1: 25 A;
BVEI3821195
Hahn And Kg
BVEI3821195 by Hahn And Kg is a Power Transformer with 4.5VA rating, 18V output voltage, and 0.25A output current. It is ideal for applications requiring a single 230V primary rating, CSA/UL approvals, and through-hole mounting method.
2170
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2170; Output Current-1: 3.33 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 100 VA; No. of Winding (Secondary): 1;
B150RFD34XJ
Micron Industries
Micron Industries' B150RFD34XJ is a 150 VA power transformer with output voltage of 110V and current rating of 0.69A. It operates at a frequency of 50/60Hz, suitable for chassis mounting in various applications requiring single-phase input at 380/400/415V.
1089
TOROIDAL POWER TRANSFORMER; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 30 VA; Output Current-1: 1 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DSW-412
Stancor Products
The Stancor Products DSW-412 is a UL and CSA approved power transformer with 6 VA rating, 0.5 A output current, and operating temperatures from -40 to 105 °C. Ideal for various applications requiring a reliable power source at 60 HZ frequency.
DSW-420
POWER TRANSFORMER; Manufacturer Series: DSW; Approvals (V): UL; CSA; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1; Output Current-1: .3 A;
DSW-424
POWER TRANSFORMER; Approvals (V): UL; CSA; Nominal Operating Frequency: 60 HZ; Length: 41.402 mm; Height: 33.274 mm; Maximum Operating Temperature: 105 Cel;
DSW-428
POWER TRANSFORMER; Manufacturer Series: DSW; Approvals (V): UL; CSA; Volt-Ampere Rating (VA): 6 VA; Output Current-1: .2 A; No. of Winding (Secondary): 1;
DSW-432
POWER TRANSFORMER; Manufacturer Series: DSW; Approvals (V): UL; CSA; Nominal Operating Frequency: 60 HZ; Maximum Operating Temperature: 105 Cel; Volt-Ampere Rating (VA): 6 VA;
DSW-436
POWER TRANSFORMER; Manufacturer Series: DSW; Approvals (V): UL; CSA; Volt-Ampere Rating (VA): 6 VA; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1;
DSW-448
POWER TRANSFORMER; Manufacturer Series: DSW; Approvals (V): UL; CSA; Additional Features: PCB MOUNTABLE; No. of Winding (Secondary): 1; Output Current-1: .125 A;
DSW-456
POWER TRANSFORMER; Manufacturer Series: DSW; Approvals (V): UL; CSA; Maximum Operating Temperature: 105 Cel; Volt-Ampere Rating (VA): 6 VA; Nominal Operating Frequency: 60 HZ;
DSW-410
POWER TRANSFORMER; Manufacturer Series: DSW; Approvals (V): UL; CSA; Volt-Ampere Rating (VA): 6 VA; Output Current-1: .6 A; Nominal Operating Frequency: 60 HZ;
DSW-416
POWER TRANSFORMER; Manufacturer Series: DSW; Approvals (V): UL; CSA; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 6 VA; Maximum Operating Temperature: 105 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved