Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: ST; Approvals (V): UL; CSA; Output Voltage-2: 5 V; Height: 23.8 mm;
Median Price
$10.395
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$17.480
100+ parts
$13.220
1k+ parts
$12.270
10k+ parts
-
Master Electronics
$11.260
Farnell
$9.530
Chip1Stop
$8.680
Nova Conductors
$7.710
Vyrian
IBS Electronics
$7.025
$6.425
TME
$8.550
$7.830
Continental Prestige Electronics
$7.556
Netroflash
AZTECH Wire
$13.891
Argo Parts USA
Power & Mains Transformers ST-2-10 attributes and parameters. Explore more Power & Mains Transformers devices from Signal Transformer
Approvals (V):
Center Tap Feature-1:
Center Tap Feature-2:
Height:
Isolation Voltage:
Length:
Manufacturer Series:
Mounting Feature:
No. of Winding (Secondary):
Nominal Operating Frequency:
Output Current-1:
Output Current-2:
Output Voltage-1:
Output Voltage-2:
Dimensions:
Rating (Primary):
Transformer Type:
Volt-Ampere Rating (VA):
Width:
ST-2-10 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.31.40.35
SB
On December 16, 2002, Bel announced a definitive agreement to acquire the assets of the passive components business from Insilco Technologies, Inc. for approximately $35 million in cash and the assumption of certain liabilities. The agreement to acquire the assets of Insilco Technologies subsidiaries Stewart Connector Systems, Inc., InNet Technologies, Inc., and Signal Transformer Co., Inc., was approved by the United States Bankruptcy Court, District of Delaware on March 7, 2003. The transaction has closed and the acquired businesses now operate as Bel companies. As an example of the increased diversification this brings to Bel's product line, the Signal Transformer acquisition adds a new market -- custom and high-frequency transformers -- and thousands of new customers to Bel's business. Additionally, Bel expects to leverage the well-established Signal Transformer brand name to develop a magnetics distribution business serving current customers who are looking for a "one-stop magnetics shop" specializing in lower-volume builds and orders." About Bel Bel (www.BelFuse.com) and its subsidiaries are primarily engaged in the design, manufacture and sale of products used in networking, telecommunications, high speed data transmission, automotive and consumer electronics. Products include magnetics and connectors for voice and data transmission, fuses, DC/DC converters, delay lines and hybrid circuits. The Company operates facilities around the world.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS07-32.768KHZ-T
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Hy Electronic
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
2129
Amecon
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2129; Output Current-1: 2.5 A; Volt-Ampere Rating (VA): 60 VA; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1;
74942300
Wuerth Elektronik & Kg
74942300 by Wurth Elektronik is a Power Transformer with 2 secondary windings, Center Tap Feature-1 & -2, and AEC-Q200 approval. It offers an Isolation Voltage of 4300V, operates b/w -40°C to 125°C, and has a Nominal Input Voltage of 1000V. Ideal for surface mount applications requiring compact dimensions (15.1mm x 14.2mm x 4.75mm).
45035
Myrra Sas
45035 by Myrra Sas is a Power Transformer with 10 VA rating, dual 115V primary, and 18V output voltage. It has CSA, UL, VDE approvals and isolation voltage of 4000V. Ideal for applications requiring reliable power conversion in compact spaces with through-hole mounting feature.
L-24
Jm Transformer
POWER TRANSFORMER; Additional Features: PCB MOUNTABLE; Output Current-1: .8 A; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1;
RTMI736614
Analog Devices
Analog Devices' RTMI736614 is a 5 VA power transformer with 500V isolation voltage, ideal for applications requiring a 26V output. With a temperature range of -55 to 105 °C and nominal frequency of 400Hz, it's suitable for various power supply designs. Measuring at 38.1x50.8x114.3mm, this through-hole mounted transformer offers reliable performance in compact spaces.
STM1686611
Analog Devices' STM1686611 is a 5 VA power transformer with 500V isolation voltage. It operates b/w -55°C to 105°C, outputting 11.8V at 400Hz frequency. Ideal for applications requiring reliable power conversion in compact spaces.
4702-08
Api Technologies
Api Technologies' 4702-08 Power Transformer has dual primary rating of 115/230V, output voltage of 16V, and output current of 0.35A. With dimensions L47.75xB39.62xH21.59 (mm), it is ideal for power supply applications requiring a VA rating of 6VA at 47/63Hz frequency.
10-8
Bel Fuse
Bel Fuse's 10-8 power transformer offers dual 8A output currents and 1500V isolation voltage. With a compact size of L85.7xB79.4xH71.4 (mm), it features center tap on both windings for versatility in applications like industrial machinery and electronic equipment requiring stable 5V outputs at a frequency of 50/60 HZ.
1124
TOROIDAL POWER TRANSFORMER; Output Current-1: 4.17 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 75 VA; No. of Winding (Secondary): 1;
1071
TOROIDAL POWER TRANSFORMER; Volt-Ampere Rating (VA): 25 VA; Output Current-1: .52 A; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1;
1183
TOROIDAL POWER TRANSFORMER; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 150 VA; Output Current-1: 10 A;
16-6
Bel Fuse's 16-6 power transformer features dual 6A output currents, 8V output voltages, and a center tap feature. With an isolation voltage of 1500V, it is ideal for applications requiring reliable power conversion in chassis-mounted setups at a nominal operating frequency of 50/60Hz.
1192
TOROIDAL POWER TRANSFORMER; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 150 VA; Output Current-1: 3.13 A;
10-50
Bel Fuse's 10-50 Power Transformer features dual 50A output currents, 1500V isolation voltage, and a compact size of 133.4mm x 139.7mm x 111.1mm. Ideal for applications requiring a center tap feature, such as power supply units or industrial equipment due to its chassis mount design and high reliability at a nominal frequency of 50/60 Hz.
STMI736612
STMI736612 by Analog Devices is a 5 VA power transformer with 500V isolation voltage. It operates b/w -55 °C to 105°C, suitable for applications requiring 90V output at 400Hz frequency. With dimensions of 38.1mm x 50.8mm x 114.3mm, it is designed for through-hole mounting in various electronic systems.
AVB0,5/2/8
Block Transformatoren-elektronik
AVB0,5/2/8 by Block Transformatoren-elektronik is a dual 115V power transformer with 0.5 VA rating. It has two windings, each outputting 8V at 50-60 HZ. Ideal for applications requiring compact dimensions and reliable power supply solutions.
DST-2-24
Bel Fuse's DST-2-24 is a split bobbin power transformer with dual 115/230V primary rating. It offers 2500V isolation voltage, 1.1VA VA rating, and two windings for 12V output each. Ideal for applications requiring reliable power conversion in compact spaces.
2216
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2216; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 160 VA; Nominal Operating Frequency: 60 HZ; Output Current-1: .7 A;
F-13X
Magnetek
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Approvals (V): UL; No. of Winding (Primary): 1; Dimensions: L60.32XB34.92XH34.92 (mm); Width: 34.92 mm;
DST2-24
A/d Electronics
POWER TRANSFORMER; No. of Winding (Secondary): 2; Additional Features: PCB MOUNTABLE; Output Current-1: .045 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 1.1 VA;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ST-2-10
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Length: 34.9 mm; Output Voltage-2: 5 V; Width: 28.6 mm;
ST-2-12
Signal Transformer
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: ST; Approvals (V): UL; CSA; Output Current-2: .09 A; Width: 28.6 mm;
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Rating (Primary): SINGLE 115V; Isolation Voltage: 2500 V; Dimensions: L34.9XB28.6XH24.6 (mm);
ST2-10
POWER TRANSFORMER; Volt-Ampere Rating (VA): 1.1 VA; No. of Winding (Secondary): 2; Additional Features: PCB MOUNTABLE; Nominal Operating Frequency: 60 HZ; Output Current-1: .11 A;
Regal Electronics
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Height: 33.3375 mm; Output Voltage-2: 5 V; Rating (Primary): SINGLE 115V;
ST2-12
POWER TRANSFORMER; Additional Features: PCB MOUNTABLE; Output Current-1: .09 A; Volt-Ampere Rating (VA): 1.1 VA; No. of Winding (Secondary): 2; Nominal Operating Frequency: 60 HZ;
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Output Current-2: .09 A; Rating (Primary): SINGLE 115V; Volt-Ampere Rating (VA): 1.1 VA;
ST-2-120
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: ST; Approvals (V): UL; CSA; Height: 23.8 mm; Center Tap Feature-1: NO;
ST-2-16
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: ST; Approvals (V): UL; CSA; Rating (Primary): SINGLE 115V; Center Tap Feature-1: NO;
ST2-10B41
Pulse Specialty Components
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: ST; Approvals (V): UL; CSA; Output Voltage-1: 5 V; Isolation Voltage: 2500 V;
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Width: 28.6 mm; Center Tap Feature-2: NO; No. of Winding (Secondary): 2;
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Isolation Voltage: 2500 V; Width: 28.6 mm; Rating (Primary): SINGLE 115V;
Pulse Electronics
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: ST2-10B41; Approvals (V): UL; CSA; Height: 23.88 mm; Center Tap Feature-1: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved