Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8663BD-B-IS by Silicon Labs is a digital isolator with 16 terminals, operating voltage range of 2.375V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, dual terminal position, and small outline package style suitable for surface mount assembly in harsh environments up to 125°C.
Median Price
$5.565
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Arrow
1+ parts
$5.098
100+ parts
$4.128
1k+ parts
$3.331
10k+ parts
-
Newark
$5.390
$4.550
DigiKey
$5.640
$3.806
$3.339
$3.163
Mouser Electronics
$5.770
$3.640
$3.380
$3.320
Farnell
$6.090
$3.900
$3.550
Element14
$7.510
Verical
$3.646
Chip1Stop
$5.490
Digiode
$3.918
Nova Conductors
$4.045
TME
$5.300
Component Electronics Inc.
$15.380
$11.540
$10.000
Chip Stock
Vyrian
Cyclops Electronics Ltd
Sensible Micro Corp
LIBRA Elektronik GmbH
EMSNET
Kiltronic GmbH
Ampacity Inc.
$2.690
Corohmni
$2.746
Corphita
$3.712
Bastille Electronics
$3.843
$3.651
$3.600
Argo Parts USA
Continental Prestige Electronics
$3.964
Component Stockers USA
$4.640
$3.670
$3.220
$3.050
Semicontronic
$5.850
$5.704
$5.674
Aztec Data Supply Inc.
$7.822
QUARKTWIN TECHNOLOGY LTD
RC Electronics
$3.060
$2.790
$2.710
Kepictronics
Authorized Procurement Solutions
Futuretech Components
Perfect Parts
Provides durability and protection for the internal components of the IC, ensuring a reliable performance over time.
Allows for easy and efficient mounting onto PCBs, saving time and effort during the manufacturing process.
Can handle a wide range of supply voltages, providing flexibility in different use cases.
Meets automotive industry standards for reliability and quality, making it suitable for automotive applications.
Optimizes space utilization on the PCB, allowing for more efficient design layouts.
Can operate in extremely low temperatures, making it suitable for use in harsh environments.
Provides low power consumption and high noise immunity, enhancing overall performance efficiency.
Matches common supply voltage levels in many electronic systems, ensuring compatibility across a variety of applications.
Other Function Interface ICs SI8663BD-B-IS attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI8663BD-B-IS Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Other - Skyworks Acquisition 9/Jul/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Onsemi
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
FDLL4148
National Semiconductor
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CC0603KRX7R9BB104
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
ADUM5411BRSZ-RL7
Analog Devices
ADUM5411BRSZ-RL7 by Analog Devices is a small outline interface IC with 24 terminals, operating at -40 to 105°C. It has a supply voltage range of 1.7V to 1.9V and terminal pitch of 0.65mm, suitable for industrial applications requiring reliable signal isolation in compact designs.
ADUM1201WURZ
ADUM1201WURZ by Analog Devices is a dual-function interface IC with 8 terminals, operating b/w -40 to 125 °C. It has a supply voltage range of 3-5.5 V and is designed for automotive applications requiring AEC-Q100 screening. The package style is small outline, making it suitable for surface mount assembly in compact electronic devices.
TUSB320IRWBR
Texas Instruments
TUSB320IRWBR by Texas Instruments is a 12-terminal interface IC with a supply voltage range of 2.7V to 5V. It operates in industrial temperature grades from -40°C to 85°C, making it suitable for various applications requiring a very thin profile chip carrier package style. The terminal finish is nickel palladium gold, and it has a moisture sensitivity level of 2.
ISO7741FQDWWRQ1
ISO7741FQDWWRQ1 by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -40 to 125 °C. It features CMOS technology, AEC-Q100 screening level, and is ideal for automotive applications requiring a supply voltage range of 2.25-5.5 V.
ISO7842DWWR
ISO7842DWWR by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and MILITARY temperature grade. It operates b/w -55 to 125 °C with supply voltage range of 2.25-5.5 V. Ideal for applications requiring high reliability in harsh environments.
TXB0108YZPR
TXB0108YZPR by Texas Instruments is an 8-bit interface IC with a max supply voltage of 5.5V and operating temperature range of -40 to 85°C. It features a grid array package style, suitable for industrial applications requiring a very thin profile and fine pitch design. With surface mount capability and low power consumption (0.01mA), it's ideal for compact electronic devices in various industries.
SI8605AC-B-IS1R
Skyworks Solutions
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Silicon Labs
INTERFACE CIRCUIT; Terminal Finish: TIN; Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 2A; Peak Reflow Temperature (C): 260;
SI8641BB-B-IS1R
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
ADUM1250WSRZ
ADUM1250WSRZ by Analog Devices is an 8-terminal IC with a supply voltage range of 3V to 5.5V, operating b/w -40°C to 125°C. Ideal for automotive applications, it features a small outline package and CMOS technology, making it suitable for interface circuit requirements in harsh environments.
SN6505ADBVT
SN6505ADBVT by Texas Instruments is a small outline interface IC with 6 terminals, operating b/w -55 to 125°C. It has a max output current of 1.5A and supports supply voltages from 2.25V to 5.5V, making it ideal for military-grade applications requiring low profile components in compact spaces.
ADUM1301ARWZ
ADUM1301ARWZ by Analog Devices is a 16-terminal IC with 3 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages ranging from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packages with gull wing terminals.
SI8640BT-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
ADUM2401ARWZ-RL
ADUM2401ARWZ-RL by Analog Devices is a CMOS interface IC with 16 terminals, operating b/w -40 to 105 °C. It has a supply voltage range of 2.7V to 5.5V and comes in a small outline package suitable for industrial applications requiring reliable signal isolation.
PCA9306DC1Z
PCA9306DC1Z by NXP Semiconductors is an Interface IC with 8 terminals, operating voltage range of 1V to 3.6V, and temperature range from -40°C to 105°C. It features a small outline package style suitable for various applications requiring level shifting and bidirectional voltage translation.
ISO7740FDBQ
ISO7740FDBQ by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -55 to 125°C. It has a supply voltage range of 2.25-5.5V and uses CMOS technology. Ideal for military applications requiring small outline packaging and dual terminal position with nickel/palladium/gold finish.
ISO7760FQDWQ1
ISO7760FQDWQ1 by Texas Instruments is a digital isolator with 6 channels. It operates at a supply voltage range of 2.25V to 5.5V and has an automotive temperature grade of -40°C to 125°C. This IC is commonly used in applications requiring isolation b/w different parts of the circuit.
ADUM2400CRWZ-RL
ADUM2400CRWZ-RL by Analog Devices is a CMOS interface IC with 16 terminals, operating b/w -40 to 105°C. It has a supply voltage range of 2.7V to 5.5V and comes in a small outline package suitable for industrial applications requiring reliable signal isolation.
EL6203CW-T7
Intersil
INTERFACE CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
ISOW7841DWE
ISOW7841DWE by Texas Instruments is a digital isolator with 4 functions, operating at 3.3V to 5.5V. It features a small outline package, dual terminal position, and CMOS technology. Ideal for automotive applications with an operating temperature range of -40°C to 125°C, offering high reliability and performance in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8641BB-B-IS1R by Silicon Labs is a 16-terminal digital isolator with 4 functions. It operates b/w -40 to 125°C, with supply voltage ranging from 2.375V to 5.5V. Ideal for applications requiring small outline packages and surface mount technology.
SI8641BB-B-IS1
SI8641BB-B-IS1 by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for surface mount applications in various electronic devices.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
SI8642ED-B-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G16;
SI8621BB-B-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP8,.25;
SI8621BB-B-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SI8621AB-B-ISR
SI8621AB-B-ISR by Silicon Labs is a digital isolator with 8 terminals, operating voltage range of 2.5V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, GULL WING terminal form, and small outline package style suitable for surface mount assembly in various electronic systems. With an extended temperature range from -40°C to 125°C, it offers reliable isolation in harsh environments.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 2.5 V;
SI8620BB-B-ISR
SI8641BD-B-ISR
SI8641BD-B-ISR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and dual terminal position. It is used in applications requiring small outline package style, CMOS technology, and temperature range from -40°C to 125°C.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 4;
SI8631BD-B-IS
SI8631BD-B-IS by Silicon Labs is a 16-terminal digital isolator with 2.5-5.5V supply voltage range, AEC-Q100 screening for automotive applications, and -40 to 125°C operating temperature. It features a small outline package style, CMOS technology, and gull wing terminal form suitable for various interface applications.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8641BA-B-IUR
SI8641BA-B-IUR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for various applications requiring interface isolation and signal transmission in electronic systems.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
SI8641BA-B-IU
SI8641BA-B-IU by Silicon Labs is a digital isolator with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 2.375V to 5.5V and comes in a small outline package suitable for surface mount applications. Ideal for systems requiring high-speed signal isolation in compact spaces.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Package Equivalence Code: SSOP16,.25;
SI8661BB-B-IS1
Silicon Labs SI8661BB-B-IS1 is a 16-terminal digital isolator with 2.375V to 5.5V supply range, AEC-Q100 screening for automotive applications, and -40°C to 125°C operating temperature. It features CMOS technology, GULL WING terminals, and small outline package ideal for various function interface ICs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved