Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI5394A-A-GM by Silicon Labs is a clock generator with 1028 MHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C and has a supply voltage range of 1.71-1.89 V. With a compact square package style and 44 terminals in quad position, it offers high performance in a small form factor.
Median Price
$11.566
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$11.281
1k+ parts
-
10k+ parts
Verical
Chip1Stop
$24.000
DF Sales Co.
$9.500
Digiode
$21.498
Vyrian
$22.630
Nova Conductors
Corphita
$20.367
Component Stockers USA
$24.050
$21.690
Corohmni
$39.375
Microchip USA
$85.169
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Allows for easy and convenient installation on circuit boards.
Provides the necessary power to operate at optimal performance levels.
Compact square shape helps in saving space on the circuit board.
High output clock frequency allows for fast processing speeds.
Sufficient number of terminals for connectivity and functionality.
Diverse package styles provide flexibility in mounting options based on specific requirements.
Low minimum supply voltage helps in efficient power consumption.
Wide operating temperature range ensures stable performance in varying environments.
Capable of functioning in extreme cold conditions.
Quad terminal position facilitates easy connections with other components.
Low seated height allows for slim and compact device designs.
Standard width size for compatibility with common circuit board layouts.
Standard length size for compatibility with common circuit board layouts.
Industrial-grade temperature rating ensures reliability in harsh industrial environments.
Tailored for clock generation in specific processor applications, ensuring precise timing.
CMOS technology offers low power consumption and high noise immunity.
No lead terminals are environmentally friendly and provide consistent electrical connections.
Stable nominal supply voltage for consistent performance.
Small terminal pitch allows for high-density mounting on circuit boards.
Suitable primary clock/crystal frequency for various clock generation applications.
Clock Generators SI5394A-A-GM attributes and parameters. Explore more Clock Generators devices from Silicon Labs
JESD-30 Code:
Length:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Clock Frequency:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Nominal Primary Clock/Crystal Frequency:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
SI5394A-A-GM Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Si5395/4/2 30/Jul/2020
PCN Other - Skyworks Acquisition 9/Jul/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rfe International
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
Panjit International
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Protek Devices
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
PLMK04832NKDT
PLMK04832NKDT by Texas Instruments is a clock generator with a max output clock frequency of 3200 MHz. It operates at a supply voltage range of 3.15 V to 3.45 V and has a square package. This IC type is commonly used as a jitter attenuator in various electronic applications.
SI5351C-B-GMR
Skyworks Solutions
CLOCK GENERATOR, PROCESSOR SPECIFIC; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
6V49205BNLGI
Renesas Electronics
Renesas Electronics 6V49205BNLGI is a clock generator with max output freq of 125 MHz, suitable for industrial applications. It operates b/w -40 to 85 °C and requires a supply voltage of 3.135-3.465 V. With a compact square package style, it features 48 terminals in a chip carrier design.
SI52112-B6-GT
CLOCK GENERATOR, PROCESSOR SPECIFIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
SI5341A-B-GMR
Silicon Labs
SI5341A-B-GMR by Silicon Labs is a clock generator with 712.5 MHz output frequency, suitable for processor-specific applications. It operates b/w -40 to 85 °C with a supply voltage range of 1.71-1.89 V, featuring a compact square package style for surface mount assembly.
DP8531V
National Semiconductor
DP8531V Clock Generator by National Semiconductor operates at 160MHz, with supply voltage range of 4.5-5.5V. Ideal for video peripherals, it features a square package style and quad terminal position for commercial-grade applications.
664G-03LFT
Integrated Device Technology
CLOCK GENERATOR, VIDEO; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
SI5338B-B10086-GM
SI5338B-B10086-GM by Silicon Labs is a clock generator with 350 MHz output frequency, 24 terminals, and 1.71-1.98 V supply voltage range. Ideal for industrial applications requiring precise timing control in compact spaces due to its small square package design and CMOS technology.
SI5392B-A-GMR
JITTER ATTENUATOR; Terminal Form: NO LEAD; No. of Terminals: 44; Package Code: HVQCCN; Package Shape: SQUARE; Minimum Supply Voltage: 1.71 V;
8T49N241-999NLGI
CLOCK GENERATOR, OTHER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
ICS501MLFT
CLOCK GENERATOR, OTHER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SI5392A-A-GMR
JITTER ATTENUATOR; Terminal Form: NO LEAD; No. of Terminals: 44; Package Code: HVQCCN; Package Shape: SQUARE; Package Body Material: UNSPECIFIED;
LTC6953IUKG#PBF
LTC6953IUKG#PBF by Analog Devices is a Clock Generator with 52 terminals, operating at 4500 MHz max frequency. It has a supply voltage range of 3.15V to 3.45V and operates in temperatures from -40°C to 125°C. Ideal for automotive applications requiring high-frequency clock generation in compact spaces.
SI5347D-D-GM
SI5347D-D-GM by Silicon Labs is a clock generator with 64 terminals, operating at 350 MHz max frequency. It has a square package shape, suitable for industrial applications. With a supply voltage range of 1.71V to 1.89V and temperature range from -40°C to 85°C, it's ideal for processor-specific systems requiring precise timing control.
SI5391B-A-GM
SI5391B-A-GM by Silicon Labs is a Clock Generator with 350 MHz output frequency, 64 terminals, and 1.71-1.89 V supply voltage range. It is used in industrial applications requiring jitter attenuation, operates b/w -40 to 85 °C, and has a compact square package style for surface mounting.
CDCM6208V1HRGZR
CDCM6208V1HRGZR by Texas Instruments is a clock generator with a max output frequency of 800 MHz. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage range of 1.71V to 3.465V. This chip carrier package with very thin profile and no lead terminal form is suitable for various applications requiring precise clock generation at high frequencies.
SI5345A-B-GMR
CLOCK GENERATOR, OTHER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;
8T49N008A-000NLGI
ICS180M-51LFT
SI5351A-B02058-GT
SI5351A-B02058-GT by Silicon Labs is a clock generator with 160 MHz output frequency, 3.6V max supply voltage, and 10 terminals. It is used in PCIe peripherals due to its small outline package style and CMOS technology for high performance at temperatures ranging from -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI5338A-B-GMR
CLOCK GENERATOR, PROCESSOR SPECIFIC; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
SI5338A-B-GMR by Silicon Labs is a clock generator with 710 MHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C with a supply voltage range of 1.71-1.98 V. This CMOS technology chip has 24 terminals in a square package style, making it ideal for processor-specific peripherals.
SI5338A-B-GM
SI5338A-B-GM by Silicon Labs is a clock generator with 710 MHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C and has a supply voltage range of 1.71-1.98 V. With a compact square package style and quad terminal position, it's ideal for processor-specific systems requiring precise timing control.
SI5338B-B-GMR
SI5338B-B-GMR by Silicon Labs is a clock generator with 350 MHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C and has a supply voltage range of 1.71-1.98 V. With a compact square package style and 24 terminals, it offers high performance in processor-specific systems.
SI5338C-B-GM
SI5338C-B-GM clock generator by Silicon Labs operates at a max frequency of 200 MHz with a supply voltage range of 1.71-1.98 V. It is ideal for industrial applications requiring precise timing, featuring a compact square package and quad terminal position for easy integration in processor-specific systems.
SI5338B-B-GM
SI5338B-B-GM clock generator by Silicon Labs operates at a max frequency of 350 MHz with 24 terminals. It has a supply voltage range of 1.71V to 1.98V and is suitable for industrial applications requiring precise clock generation in compact spaces. This CMOS technology chip carrier supports quad terminal position with a low seated height of 0.9mm, making it ideal for processor-specific systems.
SI5338C-B-GMR
SI5338C-B-GMR clock generator by Silicon Labs operates at a max frequency of 200 MHz with 24 terminals. It has a supply voltage range of 1.71V to 1.98V and is suitable for industrial applications requiring precise clock generation in compact spaces. This CMOS technology-based chip carrier package features a very thin profile, making it ideal for processor-specific peripheral ICs.
SI5351A-B-GT
SI5351A-B-GT by Silicon Labs is a clock generator with max output freq of 160 MHz. It operates b/w -40 to 85 °C and has a supply voltage range of 2.25-2.75 V. Ideal for industrial applications requiring precise clock signals in compact form factor.
CLOCK GENERATOR, PROCESSOR SPECIFIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
SI5341B-D-GM
SI5341B-D-GM by Silicon Labs is a clock generator with 350 MHz output frequency, 64 terminals, and 1.71-1.89 V supply voltage range. It is used in industrial applications requiring precise timing control and processor-specific clock generation.
CLOCK GENERATOR, PROCESSOR SPECIFIC; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE; Terminal Position: QUAD;
SI5345A-D-GM
SI5345A-D-GM by Silicon Labs is a clock generator with a max output clock frequency of 1028 MHz. It operates at a supply voltage range of 1.71 V to 1.89 V and has an industrial temperature grade of -40°C to 85°C. This chip carrier package is suitable for processor-specific applications requiring precise timing control.
SI5351A-B-GTR
SI5351A-B-GTR clock generator by Silicon Labs operates at max 160 MHz output frequency, with 10 terminals in a small outline package. Ideal for industrial applications requiring precise clock generation up to 85°C, this CMOS technology device supports a primary frequency of 27 MHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved