Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI32176-B-FM1 by Silicon Labs is a SLIC telecom IC with 42 terminals in a grid array package. It operates at -15 to -110 V, with max noise of 12 dBrnC and nominal voltage of 3.3 V. Ideal for analog data transmission interfaces, this IC is compact (7x5 mm) and suitable for applications requiring hybrid 2-4 conversion.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
PC Components Company LLC
Bristol Electronics
Microchip USA
$22.689
Ampacity Inc.
$667.000
Argo Parts USA
Continental Prestige Electronics
Authorized Procurement Solutions
Corphita
Aranea Global
Allows for easy and convenient installation on circuit boards, saving time and effort.
Provides a compact and space-saving design, making it suitable for applications with limited space.
Offers a sufficient number of terminals for connecting various components, providing flexibility in design and functionality.
Ensures a low noise level in data transmission, resulting in clear and accurate signal output.
Can operate effectively in high temperature environments, increasing the product's versatility and reliability.
Supports a wide range of battery supply voltages, allowing for compatibility with different power sources.
Capable of functioning in cold temperatures, making it suitable for various operating conditions.
Enables easy access and connection of terminals, facilitating installation and maintenance.
Has a low profile design, ideal for applications with height restrictions or space constraints.
Compact width size allows for easy integration into circuit designs and layouts.
Provides stable and reliable power supply options for the device, ensuring consistent performance.
Compact length size makes it suitable for applications with limited space availability.
Eliminates the use of lead components, making it environmentally friendly and compliant with regulations.
Designed specifically for telecom applications, ensuring compatibility and optimal performance in such environments.
Standard supply voltage for compatibility with common power sources, making it easy to integrate into existing systems.
Supports conversion between different signal types, enhancing versatility and interoperability in data transmission.
Fine terminal pitch allows for high-density packing, ideal for space-constrained applications.
Analog Data Transmission Interfaces SI32176-B-FM1 attributes and parameters. Explore more Analog Data Transmission Interfaces devices from Silicon Labs
Battery Feed:
Battery Supply (V):
Hybrid:
JESD-30 Code:
Length:
Maximum Noise:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI32176-B-FM1 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
DS18B20Z/T&R
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LUCL8574DP-D
Broadcom
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
DS30EA101SQX
DS30EA101SQX by Texas Instruments is a 16-terminal analog data transmission interface with a square package shape. It operates in industrial temperature range (-40 to 85 °C) and has a nominal voltage of 2.5 V. Ideal for telecom applications as a line equalizer, this chip carrier features no-lead terminal form and very thin profile.
HC5503TCB
Renesas Electronics
SLIC; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
PEB4266TV12SLL62
Intel
SLIC; Terminal Form: UNSPECIFIED; Package Shape: UNSPECIFIED; Terminal Position: UNSPECIFIED; Package Body Material: UNSPECIFIED; No. of Functions: 1;
LE88286DLCT
Microchip Technology
LE88286DLCT by Microchip Technology is an 80-terminal analog data transmission interface with a max noise of 19 dBrnC. Operating b/w -40 to 85 °C, it offers a min PSRR of 40 dB and supports SLIC telecom IC type for hybrid 2-4 conversion applications.
UPC7071L
SLIC; Terminal Form: J BEND; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Terminal Finish: Tin/Lead (Sn/Pb);
STLC3080
STMicroelectronics
STLC3080 by STMicroelectronics is a low-profile, square telecom IC designed for analog data transmission. It operates at 3.3V to 5V with a max temp of 85 °C and features a PSRR of 27 dB. Ideal for industrial applications, it supports constant current battery feeds.
HC5549CMZ
HC5549CMZ by Renesas Electronics is a 28-terminal analog data transmission interface in a square chip carrier package. It operates at -24 to -48V with 19dBrnC noise, suitable for SLIC telecom ICs. With a technology of bipolar and J bend terminals, it offers constant current/resistive battery feed and MSL level 3 moisture sensitivity.
HA16817NT
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 42; Package Code: DIP; Package Shape: RECTANGULAR;
HA16811AMP
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: BUTT; No. of Terminals: 44; Package Code: QFI; Package Shape: RECTANGULAR;
LMH0394SQ/NOPB
LMH0394SQ/NOPB by Texas Instruments is a CMOS LINE EQUALIZER with 2970 Mbps data rate, operating at 2.5V. It features a square chip carrier package style, -40 to 85 °C temperature range, and 0.065 mA max supply current. Ideal for analog data transmission interfaces in industrial applications.
SI3211-E-GM
Silicon Labs
SI3211-E-GM by Silicon Labs is a CMOS SLIC telecom IC with 38 terminals, operating at -40 to 85 °C. It features a 3.3/5 V power supply, 40 dB PSRR, and constant current battery feed. This chip carrier package is ideal for analog data transmission interfaces in industrial applications.
MAX14954ETO+T
LINE EQUALIZER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 42; Package Code: HVQCCN; Package Shape: RECTANGULAR;
SN65LVCP1412RLHR
SN65LVCP1412RLHR by Texas Instruments is a 24-terminal analog data transmission interface with 2 channels. It operates at temperatures ranging from -40 to 85°C and has a supply voltage of 2.5V. This LINE EQUALIZER IC in a chip carrier package is ideal for industrial applications requiring precise signal transmission over short distances.
HC5513BIP
SLIC; Terminal Form: THROUGH-HOLE; No. of Terminals: 22; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Seated Height: 5.33 mm;
ISL5586FCM
SLIC; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
PBL38772/1SOD
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
PBL38640/2SOS
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
PEB4264
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
LMH0034MAX
LMH0034MAX by Texas Instruments is a small outline analog data transmission interface with 16 terminals. Operating at 3.3V, it features a max supply current of 0.077mA and functions as a line equalizer for telecom applications. With peak reflow temperature of 235°C, it is suitable for use in compact electronic devices requiring precise signal transmission.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI32170-C-GM1R
Skyworks Solutions
SLIC; Terminal Form: NO LEAD; No. of Terminals: 42; Package Code: HLGA; Package Shape: RECTANGULAR; Package Equivalence Code: LGA42, 9X14,20;
SI32170-C-GM1
SLIC; Terminal Form: NO LEAD; No. of Terminals: 42; Package Code: HLGA; Package Shape: RECTANGULAR; Nominal Supply Voltage: 3.3 V;
SI32919-A-FSR
SI32919-A-FSR by Skyworks Solutions is an analog data transmission interface with a small outline package style. It operates at temperatures ranging from 0 to 70 °C and has a nominal voltage of 3.3 V. This telecom IC type is commonly used in SLIC applications.
SI3210M-GT
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 38; Package Code: TSSOP; Package Shape: RECTANGULAR;
SI3210M-GTR
SI32185-A-FMR
SI32185-A-FMR by Silicon Labs is a SLIC telecom IC with 40 terminals in a square chip carrier package. Operating temperature range of 0-70°C, suitable for commercial applications. Nominal voltage of 3.3V makes it ideal for analog data transmission interfaces.
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: QCCN; Package Shape: SQUARE;
SI32391-B-GMR
Analog Transmission Interfaces; Moisture Sensitivity Level (MSL): 2; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
Analog Transmission Interfaces; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2;
SI32391-B-FMR
Analog Transmission Interfaces; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2; Maximum Time At Peak Reflow Temperature (s): 40;
Analog Transmission Interfaces; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260;
SI32192-A-GM1
SI32192-A-GM1 by Silicon Labs is a 38-terminal analog data transmission interface in a rectangular chip carrier package. With max noise of 14 dBrnC, it operates b/w -40 to 85 °C and has a nominal voltage of 3.3 V. Ideal for telecom applications requiring SLIC type ICs with constant current/resistive battery feed.
SLIC; Terminal Form: NO LEAD; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Battery Supply (V): -100 TO -15;
SI32192-A-GM1R
SLIC; Terminal Form: NO LEAD; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; JESD-30 Code: R-XQCC-N38;
SLIC; Terminal Form: NO LEAD; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Battery Feed: CONSTANT CURRENT/RESISTIVE;
SI32919-A-FS
SLIC;
SI3220-FQ
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE;
SI32176-B-FM1
SLIC; Terminal Form: NO LEAD; No. of Terminals: 42; Package Code: HLGA; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved