Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 570CAC000564DGR is a CMOS XO Clock Oscillator with 50% frequency stability, operating from 10 MHz to 160 MHz. It has MIL-STD-883 screening and operates at temperatures ranging from -40°C to 85°C. Ideal for applications requiring precise timing in harsh environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
VNN
Nova Conductors
Ampacity Inc.
$1.010
Aztec Data Supply Inc.
$1.855
Corohmni
$2.023
AZTECH Wire
$16.875
Continental Prestige Electronics
Aranea Global
Corphita
Argo Parts USA
Provides a high level of stability, ensuring reliable and accurate timekeeping.
Can operate efficiently within a wide range of supply voltages, increasing flexibility in different applications.
Meets stringent military standards for quality and reliability, ideal for critical and high-performance applications.
Suitable for a variety of output load requirements, making it versatile and adaptable for different circuit configurations.
Operates with low power consumption, helping to conserve energy and prolong battery life.
Optimized for a common supply voltage, enhancing compatibility with existing systems and designs.
Utilizes CMOS technology for efficient and reliable clock signal generation.
Provides multiple terminals for easy integration and connection to other components in the circuit.
Compact and space-saving design for easy placement and installation on circuit boards.
Capable of operating in extreme low temperatures, suitable for harsh environmental conditions.
Can withstand high operating temperatures, ensuring reliable performance in various applications.
Provides a durable and corrosion-resistant terminal finish for long-term reliability.
Ensures balanced output signals, reducing signal distortion and improving overall system performance.
Capable of driving high current loads, ideal for demanding applications that require strong output signals.
Supports a wide range of operating frequencies, making it versatile for different clocking requirements.
Easy to mount on printed circuit boards, facilitating installation and assembly processes.
Allows for high-speed clock signal generation, suitable for applications that require fast and precise timing.
XO Clock Oscillators 570CAC000564DGR attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Maximum Output Low Current:
Package Equivalence Code:
Physical Dimension:
Screening Level:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
PCN Design/Specification - LOGO 17-Jan-2022
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Plessey Semiconductors Discrete Components Div
Other Transistors;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Onsemi
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
ASTMLPD-18-100.000MHZ-LJ-E-T
Abracon
Abracon's ASTMLPD-18-100.000MHZ-LJ-E-T is a 100 MHz XO Clock Oscillator with LVCMOS type, 20% frequency stability, and 1.8V nominal voltage. Ideal for applications requiring precise timing in compact designs due to its small size of 2.5mm x 2.0mm x 0.75mm and surface mounting feature.
511ABA100M000AAG
Skyworks Solutions
LVPECL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 100 MHz;
DSC1001DI5-100.0000
Microchip Technology
DSC1001DI5-100.0000 by Microchip Technology is a CMOS XO Clock Oscillator with 10% frequency stability, 3.3V supply voltage, and 100MHz operating frequency. It has a compact size of 2.5mm x 2.0mm x 0.85mm and is ideal for applications requiring precise timing in temperature-sensitive environments such as industrial automation and telecommunications systems.
LTC6991CS6#TRMPBF
Analog Devices
LTC6991CS6#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 5.5V max supply voltage, 5pF output load, and 2.7ms rise time. Ideal for applications requiring precise timing in compact designs with surface mounting feature.
LTC6991IS6#PBF
LTC6991IS6#PBF by Analog Devices is a CMOS XO Clock Oscillator with 5.5V max supply voltage, 5pF output load, and 2.7ms rise time. Ideal for applications requiring precise timing control in compact designs with surface mounting feature.
LTC6908IS6-1
LTC6908IS6-1 by Analog Devices is a CMOS XO Clock Oscillator with 40% frequency stability, operating from 0.05 MHz to 10 MHz. It has a max supply voltage of 5.5 V and output load of 5 pF, suitable for applications requiring precise timing in a compact form factor.
ASDMB-33.333MHZ-XY-T
Abracon's ASDMB-33.333MHZ-XY-T is a 33.333 MHz XO Clock Oscillator with 10% frequency stability, suitable for CMOS applications. It operates at 3.3V with a max supply current of 15mA and offers a compact size of 2.5mm x 2.0mm x 0.85mm, making it ideal for surface mount installations in temperature-sensitive environments.
LTC6908HS6-2#TRPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 23; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 10 MHz;
SG-8002CA8.0000M-SHML3
Seiko Epson
SG-8002CA8.0000M-SHML3 by Seiko Epson is a ceramic XO Clock Oscillator with 8 MHz frequency, 5 V supply voltage, and 45 mA supply current. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, with surface mounting feature.
510PCA100M000BAGR
Silicon Labs
CMOS; Terminal Finish: Nickel/Gold (Ni/Au); Qualification: Not Qualified; JESD-609 Code: e4; Power Supplies (V): 2.5;
LTC6995MPS6-2#PBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Additional Features: ENABLE/DISABLE FUNCTION;
511BBA200M000BAG
Silicon Labs' 511BBA200M000BAG is a XO Clock Oscillator with LVDS type, 200 MHz frequency, and 50% stability. Ideal for applications requiring precise timing such as networking equipment and telecommunications devices.
Q3102LC02000500
Seiko Epson's Q3102LC02000500 XO Clock Oscillator offers 120% frequency stability, 5.5V max supply voltage, and 15pF output load. Ideal for applications requiring a CMOS oscillator with dimensions of 3.6mm x 2.4mm x 1.2mm and operating temperatures ranging from -40 to 85°C.
LTC6995CS6-1#PBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 2.9mm x 1.75mm x 1.0mm;
Q3102LC02000511
Seiko Epson's Q3102LC02000511 XO Clock Oscillator offers 120% frequency stability, 5.5V max supply voltage, and 15pF output load. Ideal for applications requiring a CMOS oscillator with dimensions of 3.6mm x 2.4mm x 1.2mm, operating b/w -40°C to 85°C temperatures.
514CBB000112BAG
514CBB000112BAG by Silicon Labs is a CMOS XO Clock Oscillator with 25% frequency stability, operating at frequencies up to 212.5 MHz. It has a max supply voltage of 3.63 V and output load of 15 pF, making it suitable for applications requiring precise timing in electronic devices.
SIT8920BM-11-XXS-25.000000D
Sitime
Sitime's SIT8920BM-11-XXS-25.000000D is a XO Clock Oscillator with 20% Frequency Stability, LVCMOS/LVTTL Oscillator Type, and MIL-STD-883F Screening Level. It operates at 25 MHz frequency, has a max supply voltage of 3.63 V, and is ideal for applications requiring precise timing in harsh environments.
LTC6991IS6#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 2.7 ms; Maximum Operating Temperature: 85 Cel;
XLL736491.520000I
Integrated Device Technology
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.3 mm;
ASEMB-50.000MHZ-LY-T
Abracon's ASEMB-50.000MHZ-LY-T is a 50MHz XO Clock Oscillator with CMOS type, operating at -40 to 85°C. It requires 15mA current at 3.3V and has a compact size of 3.2mm x 2.5mm x 0.85mm, making it ideal for surface mount applications in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
570CAC000121DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
570CAC000141DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
Silicon Labs' 570CAC000141DG is a CMOS XO Clock Oscillator with 50% frequency stability, operating at 10-160 MHz. It has a max supply voltage of 3.63V and output load of 15pF. Ideal for applications requiring precise timing in electronics with temperature range -40 to 85°C.
570CAC000149DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Output Low Current: 32 Amp;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF;
570CAC000149DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
570CBC000908DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF;
570CAC000115DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Power Supplies (V): 3.3;
570CAC000169DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 98 mA;
570CAC000719DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 160 MHz;
570CAC000315DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V;
570CAC000399DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Frequency: 10 MHz;
Silicon Labs' 570CAC000399DGR is a CMOS XO Clock Oscillator with 50% Frequency Stability, operating from 10 MHz to 160 MHz. It has a Max Supply Voltage of 3.63 V and is MIL-STD-883 screened. Ideal for applications requiring precise timing in harsh environments.
570CAC000564DGR
570CAC000567DG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved