Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
570CAC000315DGR by Silicon Labs is a CMOS XO Clock Oscillator with 50% Frequency Stability, operating from 10 MHz to 160 MHz. It has MIL-STD-883 Screening Level and supports a Max Supply Voltage of 3.63 V. Ideal for applications requiring precise timing in harsh environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Nova Conductors
Digiode
Corohmni
$0.926
Aztec Data Supply Inc.
$1.533
Ampacity Inc.
$5.010
AZTECH Wire
$13.940
Continental Prestige Electronics
Argo Parts USA
Corphita
Aranea Global
Provides reliable and accurate timekeeping, suitable for various applications.
Allows for flexibility in power supply options.
Ensures high quality and reliability in harsh environments.
Compatible with typical load requirements, ensuring proper functionality.
Efficient power consumption, ideal for battery-powered devices.
Standard voltage level that is widely compatible with various systems.
Low power consumption and high noise immunity.
Offers connectivity options for integration into different circuits.
Compact and space-saving design for tight PCB layouts.
Wide operating voltage range for increased compatibility.
Suitable for operation in various environmental conditions.
Resilient to low temperature conditions, ensuring reliable performance.
Provides corrosion resistance and ensures long-term reliability.
Ensures balanced output waveform, minimizing signal distortion.
Capable of driving loads with sufficient current capacity.
Can provide precise timing at low frequencies.
Easy and secure installation on PCBs, suitable for automated assembly.
Suitable for high-speed applications that require precise timing.
XO Clock Oscillators 570CAC000315DGR attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Maximum Output Low Current:
Package Equivalence Code:
Physical Dimension:
Screening Level:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
261
Deltrol Controls
Other Relays;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Rugao Dachang Electronic
LTC6906HS6#PBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Output Load: 5 pF; Maximum Symmetry (%): 55/45;
ASE-18.432MHZ-L-C-T
Abracon
Abracon's ASE-18.432MHZ-L-C-T is a CMOS XO Clock Oscillator with 18.432 MHz frequency, 50% stability, and 15 pF output load. Ideal for applications requiring precise timing in a compact 3.2mm x 2.5mm x 1.0mm package, operating b/w -40 to 85 °C temperature range.
510DCA100M000AAG
Skyworks Solutions
HCSL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V;
SG-8002CA4.0960M-PHML3
Seiko Epson
SG-8002CA4.0960M-PHML3 by Seiko Epson is a ceramic XO Clock Oscillator with 4.096 MHz frequency, 5 V nominal voltage, and 85°C max operating temp. Ideal for applications requiring precise timing in compact designs due to its small size and surface mounting feature.
ASAKMPD1-32.768KHZT3
Abracon's ASAKMPD1-32.768KHZT3 is a CMOS XO Clock Oscillator with 10% frequency stability, 15 pF output load, and 3.63 V max supply voltage. Ideal for applications requiring precise timing at temperatures ranging from -20 to 70°C in compact designs.
LTC6906IS6
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45; Minimum Operating Temperature: -40 Cel;
SG5032VAN200.000000M-KEGA3
SG5032VAN200.000000M-KEGA3 by Seiko Epson is a 200 MHz LVDS XO Clock Oscillator with 30% frequency stability, 3.3 V max supply voltage, and 100 OHM output load. Ideal for applications requiring precise timing in temperature-sensitive environments due to its wide operating range from -40°C to 85°C.
LTC6995IS6-2#TRPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Package Body Material: PLASTIC/EPOXY;
FO5HSCBM50.0-T1
Abracon's FO5HSCBM50.0-T1 XO Clock Oscillator operates at 50MHz with 50% frequency stability, HCMOS type, and 15pF output load. Ideal for applications requiring precise timing in a compact 5.0mm x 3.2mm x 1.3mm package, with a wide operating temperature range from -40°C to 85°C.
DSC1123CI2-125.0000T
Ael Crystals
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 125 MHz;
SIT9121AI-2B3-33E200.000000G
Sitime
SIT9121AI-2B3-33E200.000000G by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 50% Frequency Stability, LVDS type, and 200 MHz Nominal Operating Frequency. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, it features a compact size of 3.2mm x 2.5mm x 0.75mm for surface mount installations.
570BAB000544DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
LTC6908HS6-1#TRM
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 23; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 5.5 V;
ASFLMB-24.000MHZ-LR-T
Abracon's ASFLMB-24.000MHZ-LR-T is a 24MHz XO Clock Oscillator with 25% frequency stability, CMOS technology, and 15pF output load. Ideal for applications requiring precise timing in temperature range of -40 to 85°C. Suitable for surface mounting with compact dimensions of 5.0mm x 3.2mm x 0.85mm.
LTC6908IS6-2#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 23; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Additional Features: TAPE AND REEL;
510CCAM409600BAGR
Silicon Labs
510CCAM409600BAGR by Silicon Labs is a CMOS XO Clock Oscillator with 0.4096 MHz frequency, 50% stability, and MIL-STD-883 screening. Ideal for applications requiring precise timing in environments with temperatures ranging from -40 to 85 °C.
ASEMDC2-L-R
Abracon's ASEMDC2-L-R is a 156.25 MHz CMOS XO Clock Oscillator with 14 terminals, operating b/w -40°C to 85°C. It has a power supply of 2.5/3.3V and can handle up to 6A output low current. Ideal for applications requiring precise timing in electronic devices.
540BAA125M000BBGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
XLH536200.000000I
Renesas Electronics
XLH536200.000000I by Renesas Electronics is a 200 MHz HCMOS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 3.3 V and has a max rise time of 3 ms, making it ideal for electronic devices that demand accurate clock synchronization in a compact form factor.
LTC6903IMS8#PBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Adjustment (Mechanical): NO; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 2.7 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
570CAC000121DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
570CAC000141DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
Silicon Labs' 570CAC000141DG is a CMOS XO Clock Oscillator with 50% frequency stability, operating at 10-160 MHz. It has a max supply voltage of 3.63V and output load of 15pF. Ideal for applications requiring precise timing in electronics with temperature range -40 to 85°C.
570CAC000149DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Output Low Current: 32 Amp;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF;
570CAC000149DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
570CBC000908DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF;
570CAC000115DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Power Supplies (V): 3.3;
570CAC000169DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 98 mA;
570CAC000719DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 160 MHz;
570CAC000315DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V;
570CAC000399DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Frequency: 10 MHz;
Silicon Labs' 570CAC000399DGR is a CMOS XO Clock Oscillator with 50% Frequency Stability, operating from 10 MHz to 160 MHz. It has a Max Supply Voltage of 3.63 V and is MIL-STD-883 screened. Ideal for applications requiring precise timing in harsh environments.
570CAC000564DGR
570CAC000310DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Screening Level: MIL-STD-883;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved