Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
570CAC000149DGR by Silicon Labs is a CMOS XO Clock Oscillator with 50% Frequency Stability, 3.63V Max Supply Voltage, and MIL-STD-883 Screening Level. Ideal for applications requiring precise timing such as telecommunications equipment, networking devices, and industrial automation systems.
Median Price
$14.212
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
VNN
Vyrian
Digiode
Ampacity Inc.
$1.010
Aztec Data Supply Inc.
$1.287
Corohmni
$2.797
AZTECH Wire
$13.373
Bastille Electronics
$14.210
$13.500
$12.647
Continental Prestige Electronics
$13.928
Advanced Electronics
$17.302
$15.918
$14.916
Argo Parts USA
Corphita
This clock oscillator provides a high level of frequency stability, ensuring accurate and reliable timing performance in various applications.
The high maximum supply voltage allows for flexibility in power supply options, accommodating a wide range of systems and setups.
Compliance with MIL-STD-883 screening standards ensures the oscillator's reliability and durability in harsh environmental conditions and critical applications.
The low output load of 15 pF minimizes the impact on the connected circuitry, resulting in efficient operation and signal integrity.
With a maximum supply current of 98 mA, this oscillator offers optimized power consumption while maintaining high performance levels.
The nominal supply voltage of 3.3 V ensures compatibility with standard power sources, making integration easier in various electronic systems.
The CMOS oscillator type provides a balance between power efficiency and performance, making it suitable for a wide range of applications.
The 8 terminals offer ample connectivity options, allowing for versatile integration and compatibility with different circuit designs.
The compact size of the oscillator makes it easy to fit into space-constrained designs without compromising on functionality.
The low minimum supply voltage ensures that the oscillator can operate efficiently even in low-power scenarios.
The wide maximum operating temperature range of 85°C allows for reliable performance in both standard and high-temperature environments.
The ability to operate at temperatures as low as -40°C ensures that the oscillator remains functional in cold or extreme conditions.
The gold terminal finish with a nickel barrier provides excellent conductivity and corrosion resistance, enhancing the oscillator's durability and longevity.
The maximum symmetry ratio of 55/45 ensures balanced output waveforms, contributing to stable and accurate clock signals.
The high maximum output low current capacity of 32 Amp allows for efficient signal transmission and robust performance in demanding applications.
The low minimum operating frequency of 10 MHz supports a wide range of timing requirements and applications, from basic to more complex systems.
The surface mounting feature simplifies the installation and assembly process, making it convenient for automated manufacturing and compact designs.
With a maximum operating frequency of 160 MHz, this clock oscillator is capable of delivering high-speed and precision timing signals for advanced electronic systems.
XO Clock Oscillators 570CAC000149DGR attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Maximum Output Low Current:
Package Equivalence Code:
Physical Dimension:
Screening Level:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
PCN Design/Specification - LOGO 17-Jan-2022
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LTC6908IS6-1#PBF
Analog Devices
LTC6908IS6-1#PBF by Analog Devices is a CMOS XO Clock Oscillator with 40% frequency stability, operating from 0.05 MHz to 10 MHz. It has a max supply voltage of 5.5 V and output load of 5 pF, suitable for surface mount applications in various electronic devices.
MXO45HS-2I-4M9152
Cts
Cts MXO45HS-2I-4M9152 is a 4.9152 MHz XO Clock Oscillator with HCMOS/TTL type, 100% frequency stability, and 5.5V max supply voltage. Ideal for applications requiring precise timing in environments ranging from -40°C to 85°C.
ASG2-LJ-100.000MHZ-513298
Abracon
Abracon's ASG2-LJ-100.000MHZ-513298 XO Clock Oscillator operates at 100MHz with LVCMOS type, 35% frequency stability, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor like IoT devices or communication systems.
ECX-L33BN-212.500
Ecs International
ECX-L33BN-212.500 by Ecs International is a LVDS XO Clock Oscillator with 212.5 MHz frequency, 50% stability, and 3.465 V max supply voltage. Ideal for applications requiring precise timing in temperature-sensitive environments due to its -40°C to 85°C operating range and compact size of 3.2mm x 2.5mm x 0.9mm.
AX7DAF3-200.0000C
Abracon's AX7DAF3-200.0000C is a 200 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. Operating at a nominal voltage of 3.3 V, it offers fast rise and fall times of 0.35 ms and 0.35 ns respectively. With surface mounting feature, it is ideal for compact electronic devices in temperature-sensitive environments.
570FAB000433DG
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Package Equivalence Code: LCC8,.2X.28,100;
FXO-HC536R-12.288
Renesas Electronics
Renesas Electronics' FXO-HC536R-12.288 is a 12.288 MHz HCMOS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 3.3 V with a max supply voltage of 3.465 V and features a compact size of 5.15mm x 3.35mm x 1.4mm for surface mounting in various electronic devices.
DSC1001DI1-033.3330T
DSC1001DI1-033.3330T by Microchip Technology is a CMOS XO Clock Oscillator with 33.333 MHz frequency, 50% stability, and 3.3 V supply voltage. Ideal for applications requiring precise timing in temperature-sensitive environments with its compact size of 2.5mm x 2.0mm x 0.85mm and surface mounting feature.
DSC1001DI1-033.3000T
DSC1001DI1-033.3000T by Microchip is a CMOS XO Clock Oscillator with 33.3 MHz frequency, 3.3 V supply voltage, and 50% stability. Ideal for applications requiring precise timing in electronics with surface mount requirements due to its compact size and high temperature range of -40°C to 85°C.
LTC6991CS6#TRPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Physical Dimension: 2.9mm x 1.5mm x 1.0mm; Maximum Fall Time: 2.4 ns;
ASEMB-100.000MHZ-XY-T
Abracon's ASEMB-100.000MHZ-XY-T is a CMOS XO Clock Oscillator with 100MHz frequency, 3.3V supply voltage, and 15mA current. Ideal for applications requiring precise timing in a compact 3.2mm x 2.5mm package, operating b/w -40°C to 105°C temperature range.
DSC1123BI2-200.0000
Microchip Technology's DSC1123BI2-200.0000 is a 200 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates b/w -40°C to 85°C, with a supply voltage range of 2.25V to 3.6V and output load of 100Ω, making it ideal for various electronic devices needing reliable clock signals.
SIT1532AC-J5-DCC-32.768D
Sitime
SIT1532AC-J5-DCC-32.768D by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 75% Frequency Stability, LVCMOS Technology, and 1.54mm x 0.84mm x 0.6mm Physical Dimension. It operates at 0.032768 MHz, suitable for applications requiring precise timing in temperature-sensitive environments like IoT devices and wearables due to its low power consumption of 0.0013 mA at a max supply voltage of 3.63 V.
DSC1001CL5-012.0000T
DSC1001CL5-012.0000T by Microchip: 12MHz XO Clock Oscillator with 10% stability, 3.3V supply, CMOS type. Ideal for applications requiring precise timing in a compact form factor.
ASDMB-25.000MHZ-LR-T
Abracon's ASDMB-25.000MHZ-LR-T is a 25MHz CMOS XO Clock Oscillator with 1.8/3.3V supply, 16mA current, and -40 to 85°C operating range. Ideal for applications requiring compact size and high-frequency precision in surface-mount setups.
511ABA200M000AAG
LVPECL; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
ASDMB-3.6864MHZ-XY-T
Abracon's ASDMB-3.6864MHZ-XY-T is a 3.3V CMOS XO Clock Oscillator with 10% frequency stability, suitable for applications requiring precise timing. It operates at 3.6864 MHz with a max rise time of 2 ms and features a compact size of 2.5mm x 2.0mm x 0.85mm, making it ideal for surface mount installations in temperature-sensitive environments.
DSC1001CE2-010.0000T
DSC1001CE2-010.0000T by Microchip Technology is a CMOS XO Clock Oscillator with 10 MHz frequency, 25% stability, and 3.3 V supply voltage. Ideal for applications requiring precise timing in electronics due to its small size (3.2mm x 2.5mm x 0.85mm) and surface mount feature for easy installation in various devices.
SG5032CAN48.000000M-TJGA3
Seiko Epson
SG5032CAN48.000000M-TJGA3 by Seiko Epson is a 48 MHz XO Clock Oscillator with a frequency stability of 50%. It has a max supply voltage of 3.6V and is suitable for surface mount applications.
AX7DAF3-100.0000C
Abracon's AX7DAF3-100.0000C XO Clock Oscillator operates at 100MHz with LVDS type, 25% frequency stability, and 3.63V max supply voltage. Ideal for applications requiring precise timing in a compact 7.0mm x 5.0mm x 1.8mm surface mount package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
570CAC000121DG
Silicon Labs
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
570CAC000141DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
Silicon Labs' 570CAC000141DG is a CMOS XO Clock Oscillator with 50% frequency stability, operating at 10-160 MHz. It has a max supply voltage of 3.63V and output load of 15pF. Ideal for applications requiring precise timing in electronics with temperature range -40 to 85°C.
570CAC000149DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF;
570CAC000149DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Output Low Current: 32 Amp;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
570CBC000908DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF;
570CAC000115DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Power Supplies (V): 3.3;
570CAC000169DG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 98 mA;
570CAC000719DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 160 MHz;
570CAC000315DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V;
570CAC000399DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Frequency: 10 MHz;
Silicon Labs' 570CAC000399DGR is a CMOS XO Clock Oscillator with 50% Frequency Stability, operating from 10 MHz to 160 MHz. It has a Max Supply Voltage of 3.63 V and is MIL-STD-883 screened. Ideal for applications requiring precise timing in harsh environments.
570CAC000564DGR
570CAC000144DG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved