Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 540BAA156M250BBG is a LVDS XO Clock Oscillator with 20% frequency stability, operating at 156.25 MHz. It has a max supply voltage of 3.465 V and output load of 5 pF. Ideal for applications requiring precise timing in temperature-sensitive environments.
Median Price
$9.780
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$9.190
1k+ parts
$8.310
10k+ parts
-
Digiode
$9.291
Vyrian
Nova Conductors
VNN
Ampacity Inc.
Corphita
$8.802
Aranea Global
Provides reliable and consistent output frequency for precise timekeeping applications.
Allows for a sufficient power supply to ensure optimal performance without risking damage to the oscillator.
Suitable for driving a variety of circuits with low output load requirements, enhancing compatibility with different systems.
Standard voltage level that is commonly used in many electronic devices, simplifying integration into existing systems.
Low Voltage Differential Signaling technology offers high-speed data transmission and noise immunity, making it ideal for demanding applications.
Provides a compact and efficient design for easy installation and connectivity in space-constrained environments.
Fast rise time ensures quick response and minimal delay in signal output, crucial for time-sensitive operations.
Compact form factor saves space and allows for versatile placement within electronic assemblies or devices.
Provides a range of operating voltages to accommodate different power supply conditions while maintaining stability.
High operating temperature limit ensures reliability in harsh environments or industrial applications with elevated temperatures.
Wide temperature range allows for reliable performance in extreme cold conditions without affecting oscillator functionality.
Specific frequency output suitable for precision clocking applications in various electronic systems.
Quick fall time enables rapid signal transitions for accurate timing control in high-speed digital circuits.
Balanced output symmetry ensures symmetrical signal waveforms for improved signal integrity and compatibility with downstream components.
Surface mount design facilitates easy and secure installation on circuit boards for efficient production and assembly processes.
XO Clock Oscillators 540BAA156M250BBG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
Mounting Feature:
No. of Terminals:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
Daco Semiconductor
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
MX573NBA622M080-TR
MX573NBA622M080-TR by Microchip Technology is a PECL XO Clock Oscillator with 622.08 MHz frequency, 50% stability, and 3.63 V max supply voltage. Ideal for applications requiring precise timing in environments ranging from -40 to 85 °C, it features a compact size of 7.0mm x 5.0mm x 1.4mm and surface mounting feature.
DSC6001HE1B-011.0592T
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
DSC1121CI2-025.0000T
Microchip's DSC1121CI2-025.0000T is a CMOS XO Clock Oscillator with 25 MHz frequency, 25% stability, and 15 pF load. Ideal for applications requiring precise timing in electronics due to its compact size and wide operating temperature range of -40°C to 85°C.
LTC6995HS6-2#TRPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Additional Features: ENABLE/DISABLE FUNCTION;
DSC1001DI1-033.3300
DSC1001DI1-033.3300 by Microchip Technology is a CMOS XO Clock Oscillator with 3.3V supply voltage, 33.33 MHz frequency, and 50% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85°C with surface mounting feature.
CB3LV-3C-50M00000
Cts
CB3LV-3C-50M00000 by Cts is a 50 MHz XO Clock Oscillator with 50% frequency stability. It operates at a max supply voltage of 3.6V and has a max operating temperature of 70°C. This surface mount oscillator is commonly used in applications requiring precise timing and synchronization.
LTC6908IS6-1#TR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 23; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.7 V;
AX3DAF1-125.0000T
Abracon
Abracon's AX3DAF1-125.0000T is a 125MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. Operating at 3.3V, it offers a max rise time of 0.4ms and fall time of 0.4ns, making it ideal for high-speed digital circuits in various electronic devices.
AX3PAF1-156.2500T3
Abracon's AX3PAF1-156.2500T3 XO Clock Oscillator operates at 156.25 MHz with LVPECL type, 25% frequency stability, and 3.63V max supply voltage. Ideal for applications requiring precise timing in a compact 3.2mm x 2.5mm x 1.0mm package like telecommunications and networking equipment.
534GB000559DG
Skyworks Solutions
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 2.75 V;
LTC6905CS5-96#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: .5 ns;
532PC000553DG
Silicon Labs
532PC000553DG by Silicon Labs is a CMOS XO Clock Oscillator with 7% frequency stability, operating b/w -40°C to 85°C. It has a max supply voltage of 3.63V and operates at frequencies ranging from 10MHz to 160MHz. Ideal for applications requiring precise timing in harsh environments per MIL-STD-883 screening standards.
LTC6908IDCB-2#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 11 ms;
SG5032CAN2.5000000M-TJGA3
Seiko Epson
Seiko Epson's SG5032CAN2.5M-TJGA3 is a 2.5 MHz XO Clock Oscillator with 50% frequency stability, CMOS type, and 15 pF output load. Ideal for applications requiring precise timing in a compact form factor like IoT devices and wearables due to its small size and low power consumption.
XLL735080.000000I
Renesas Electronics
Renesas Electronics XLL735080.000000I is a 80 MHz LVDS XO Clock Oscillator with 50% frequency stability, 3.465 V max supply voltage, and 15 pF output load. Ideal for applications requiring precise timing in temperature-sensitive environments due to its -40°C to 85°C operating range.
ASDMB-150.000MHZ-XY-T
Abracon's ASDMB-150.000MHZ-XY-T is a 150MHz CMOS XO Clock Oscillator with 4 terminals, operating from -40°C to 105°C. It consumes up to 15mA at voltages of 1.8V/3.3V, ideal for surface mount applications in various electronic devices.
SIT9386AE-2B2-33E125.000000G
Sitime
SIT9386AE-2B2-33E125.000000G by Sitime is a 125 MHz LVDS XO Clock Oscillator with 25% frequency stability, operating from -40°C to 105°C. It has a max supply voltage of 3.63V and output load of 100Ω, suitable for surface mount applications in various electronic devices requiring precise timing control.
511ABA200M000AAG
LVPECL; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
ASG2-LJ-200.000MHZ-513293
Abracon's ASG2-LJ-200.000MHZ-513293 is a 200MHz LVDS XO Clock Oscillator with 35% frequency stability, suitable for applications requiring precise timing. Operating at temperatures from -40°C to 85°C, it has a max supply voltage of 2.625V and output load of 100Ω/10pF, making it ideal for compact electronic devices.
DSC1004DI2-016.0000
DSC1004DI2-016.0000 by Microchip is a CMOS XO Clock Oscillator with 16MHz frequency, 25% stability, and 3.3V supply voltage. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact size and high performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
540BAA148M500BBGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Additional Features: TRI-STATE; ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT; TR;
540BAA150M000BAGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 3.135 V;
540BAA125M000BBGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Output Load: 100 OHM;
540BAA100M000BBG
540BAA156M250BBGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
540BAA156M250BCG
LVDS;
540BAA156M250BCGR
540BAA156M250BAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
540BAA156M250ABGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.43mm;
540BAA156M250ABG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.465 V;
540BAA156M250CBG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: .35 ns;
540BAA156M250BAGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Additional Features: TRI-STATE; ENABLE/DISABLE FUNCTION; TR;
540BAA156M250CBGR
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: .35 ms; Minimum Operating Temperature: -40 Cel;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: .35 ms;
540BAA156M250ACGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 156.25 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 111 mA;
540BAA156M250ACG
540BAA156M250CCGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 3.2mm x 2.5mm x 1.0mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved