Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 545ACA128M000ABGR XO Clock Oscillator operates at 128 MHz with LVPECL type. It offers 7% frequency stability, 3.465V max supply voltage, and 50 OHM output load. Ideal for applications requiring precise timing such as networking equipment and telecommunications devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Nova Conductors
VNN
Ampacity Inc.
$1.010
Aztec Data Supply Inc.
$3.370
Semicontronic
$4.010
$3.910
$3.890
AZTECH Wire
$9.242
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Corphita
Excellent frequency stability ensures accurate and reliable timekeeping, making this clock oscillator ideal for applications that require precise timing.
The high maximum supply voltage allows for flexibility in power supply options and compatibility with various systems.
The low output load of 50 OHM ensures efficient power usage and compatibility with a wide range of circuit configurations.
The LVPECL oscillator type offers low phase noise and high frequency stability, making it suitable for high-performance applications such as networking and telecommunications.
Compact size and surface mount design make installation easy and allow for space-saving integration into electronic devices.
The low minimum supply voltage ensures compatibility with a wide range of power sources, making this oscillator versatile and flexible for different applications.
With a high maximum operating temperature, this clock oscillator can withstand harsh environmental conditions and maintain stable performance in a variety of applications.
The wide operating temperature range allows for reliable performance in extreme temperature environments, increasing the versatility and usability of this clock oscillator.
The nickel/gold terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term reliability and stable performance over the product's lifespan.
The high nominal operating frequency of 128 MHz provides fast and accurate timing signals, making this clock oscillator suitable for a wide range of high-speed applications.
The short maximum fall time ensures fast signal transitions, enabling high-speed data processing and communication in electronic systems.
The high symmetry percentage of 55/45 ensures balanced output signals, reducing signal distortion and improving overall system performance.
The surface mount design simplifies installation and allows for easy integration into compact electronic devices, making this clock oscillator a convenient and practical choice for various applications.
XO Clock Oscillators 545ACA128M000ABGR attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Voltage:
Minimum Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
ASAKMPD1-32.768KHZT3
Abracon
Abracon's ASAKMPD1-32.768KHZT3 is a CMOS XO Clock Oscillator with 10% frequency stability, 15 pF output load, and 3.63 V max supply voltage. Ideal for applications requiring precise timing at temperatures ranging from -20 to 70°C in compact designs.
510CBA2M09600AAG
Skyworks Solutions
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Minimum Supply Voltage: 2.97 V;
SIT8920BM-71-18E-1.000000G
Sitime
SIT8920BM-71-18E-1.000000G by Sitime is a 1MHz LVCMOS XO Clock Oscillator with 20% frequency stability, suitable for applications requiring precise timing. It operates at 1.8V nominal voltage, has a max rise time of 2.5ms, and features a compact size of 2mm x 1.6mm x 0.75mm for surface mounting in various electronic devices.
DSC1001CL5-025.0000T
Microchip Technology
DSC1001CL5-025.0000T by Microchip: 25MHz XO Clock Oscillator with 10% stability, 3.3V supply, CMOS type. Ideal for applications requiring precise timing in temperature range -40 to 105°C. Features surface mounting and nickel palladium gold terminal finish.
CB3LV-3I-50M000000
Cts
CB3LV-3I-50M000000 by Cts is a 50 MHz XO Clock Oscillator with 50% Frequency Stability, HCMOS/TTL type. Operating at 3.3V, it has a max rise time of 5ms and output load of 30pF. Ideal for applications requiring precise timing in electronics with surface mount requirements.
SIT9375AI-01A1-1810-100.000000E
SIT9375AI-01A1-1810-100.000000E by Sitime is a LVPECL XO Clock Oscillator with 20% frequency stability, operating at 100 MHz. It has a max supply voltage of 1.89 V and MIL-STD-883F screening level. Ideal for applications requiring precise timing in temperature-sensitive environments.
ASEMB-24.000MHZ-LC-T
Abracon's ASEMB-24.000MHZ-LC-T is a 24MHz XO Clock Oscillator with 50% frequency stability, CMOS technology, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor such as IoT devices, wearables, and communication systems.
534GB000559DGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;
ASTMLPD-18-100.000MHZ-LJ-E-T
Abracon's ASTMLPD-18-100.000MHZ-LJ-E-T is a 100 MHz XO Clock Oscillator with LVCMOS type, 20% frequency stability, and 1.8V nominal voltage. Ideal for applications requiring precise timing in compact designs due to its small size of 2.5mm x 2.0mm x 0.75mm and surface mounting feature.
ASFLMB-50.000MHZ-LR-T
Abracon's ASFLMB-50.000MHZ-LR-T is a 50MHz XO Clock Oscillator with 25% frequency stability, CMOS technology, and 15pF output load. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
SIT8008BIF11-33E-2.097152G
SIT8008BIF11-33E-2.097152G by Sitime is a 2.097152 MHz XO Clock Oscillator with LVCMOS type, 20% frequency stability, and 15 pF output load. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, it features compact dimensions of 2.5mm x 2.0mm x 0.75mm for surface mount installation.
510FBA156M250BAG
Silicon Labs
Silicon Labs' 510FBA156M250BAG is a LVDS XO Clock Oscillator with 25% frequency stability, operating at 156.25 MHz. It has a max supply voltage of 2.75 V and MIL-STD-883 screening level. Ideal for applications requiring precise timing in environments ranging from -40°C to 85°C.
DSC1123CI5-125.0000
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 10 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 22 mA;
511FBA125M000AAG
511FBA125M000AAG by Silicon Labs is a 125 MHz LVDS XO Clock Oscillator with 25% frequency stability. Operating at temperatures from -40 to 85 °C, it has a max supply voltage of 2.75 V and output load of 100 OHM. Ideal for applications requiring precise timing in compact designs.
ASEM1-50.000MHZ-L-C-T
Abracon's ASEM1-50.000MHZ-L-C-T is a 50 MHz XO Clock Oscillator with 3.3V supply, CMOS type, and 10mA max current draw. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
DSC1001AE5-040.0000
Microchip Technology's DSC1001AE5-040.0000 is a 40 MHz XO Clock Oscillator with 10% frequency stability and AEC-Q100 screening for automotive applications. It operates at 3.3V, consumes 12.2mA max supply current, and has a compact size of 7.0mm x 5.0mm x 0.9mm suitable for surface mounting in various electronic devices.
ASEMB-25.000MHZ-XY-T
Abracon's ASEMB-25.000MHZ-XY-T is a 25MHz CMOS XO Clock Oscillator with 3.3V supply voltage, suitable for applications requiring frequencies from 1MHz to 150MHz. This surface-mount oscillator has a compact size of 3.2mm x 2.5mm x 0.85mm and operates in temperatures ranging from -40°C to 105°C, drawing a max current of 15mA.
LTC6902CMS#PBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 3.6 mA;
X1G004171004412
Seiko Epson
X1G004171004412 by Seiko Epson is a CMOS XO Clock Oscillator with 38.4 MHz frequency, 50% stability, and 15 pF output load. It operates b/w -40 to 85 °C, has gold terminal finish, and measures 2.5mm x 2.0mm x 0.8mm. Ideal for applications requiring precise timing in compact electronic devices.
ASG2-LJ-200.000MHZ-513301-T
ASG2-LJ-200.000MHZ-513301-T by Abracon is a XO Clock Oscillator with a frequency stability of 35%, max supply voltage of 2.625 V, and output load of 15 pF. It is commonly used in applications requiring precise timing and synchronization, such as telecommunications equipment and data communication systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
545ACA128M000ABGR
LVPECL; Mounting Feature: SURFACE MOUNT; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Output Load: 50 OHM; JESD-609 Code: e4;
545ACA128M000ABG
The 545ACA128M000ABG by Skyworks Solutions is a XO Clock Oscillator with a frequency stability of 7%, a maximum supply voltage of 3.465 V, and an output load of 50 OHM. It operates at a nominal frequency of 128 MHz and has a LVPECL oscillator type. It also features a TRI-STATE, ENABLE/DISABLE function, complementary output, and surface mount mounting feature.
LVPECL; Mounting Feature: SURFACE MOUNT; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Additional Features: TRI-STATE; ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT; TAPE; Output Load: 50 OHM;
545ABA156M250ACG
LVPECL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 10 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 3.135 V;
545ABA25M0000ABGR
LVPECL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 10 %; Frequency Adjustment (Mechanical): NO; Output Load: 5 pF;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved