Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 531FB160M000DG is a PLASTIC/EPOXY XO Clock Oscillator with LVDS type, operating at 160 MHz. It has a frequency stability of 20%, suitable for applications requiring precise timing such as high-speed data communication systems. With a compact size of 7.0mm x 5.0mm x 1.85mm and surface mount feature, it offers flexibility in various electronic designs while ensuring reliable performance up to 945 MHz.
Median Price
$20.144
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Arrow
1+ parts
-
100+ parts
$11.230
1k+ parts
10k+ parts
Verical
$29.057
Vyrian
$12.760
VNN
Digiode
Nova Conductors
TME
$4.730
Ampacity Inc.
$10.790
QUARKTWIN TECHNOLOGY LTD
Corphita
Aranea Global
Glotronic Ltd.
Plastic/Epoxy material provides durability and reliability for long-term use.
High frequency stability of 20% ensures precise timekeeping and reliable performance.
Allows for a higher supply voltage, offering flexibility in power supply options.
Low supply current consumption of 98 mA helps in saving energy and reducing power costs.
Stable nominal supply voltage of 2.5 V ensures consistent performance.
Matches the nominal supply voltage for easy integration into electronic circuits.
Low Voltage Differential Signaling (LVDS) provides high-speed data transmission and noise immunity.
6 terminals offer easy connectivity for integration into circuit boards.
Fast rise time of 0.35 ms ensures quick response and signal processing.
Compact size of 7.0mm x 5.0mm x 1.85mm saves space and allows for easy mounting.
Allows for operation at lower supply voltages, increasing versatility in power supply options.
Wide operating temperature range of -40°C to 85°C ensures reliable performance in various environmental conditions.
Capable of operating in low-temperature environments down to -40°C for versatile use cases.
Nickel/Gold terminal finish provides good conductivity and corrosion resistance for long-term reliability.
Stable nominal operating frequency of 160 MHz ensures accurate timekeeping and performance.
Fast fall time of 0.35 ns ensures rapid signal transitions for high-speed applications.
Symmetrical output waveforms with a ratio of 55/45 ensure balanced signal processing.
Capable of operating at low frequencies down to 10 MHz for a wide range of applications.
Surface mount design enables easy and secure installation on circuit boards.
High maximum operating frequency of 945 MHz allows for high-speed performance in various applications.
XO Clock Oscillators 531FB160M000DG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Package Body Material:
Package Equivalence Code:
Physical Dimension:
Power Supplies (V):
Qualification:
Maximum Rise Time:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS303C
Idec
ROTARY SWITCH;
RC0402FR-0710KL
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
American Power Devices
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
General Semiconductor
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
ASEMB-16.000MHZ-LC-T
Abracon
ASEMB-16.000MHZ-LC-T by Abracon is a 16 MHz XO Clock Oscillator with a frequency stability of 50%. It has a max operating temperature of 85°C and is suitable for surface mount applications.
ASA-26.000MHZ-L-T3
Abracon's ASA-26.000MHZ-L-T3 is a 26MHz XO Clock Oscillator with 50% frequency stability, HCMOS type, and 10mA max supply current. Ideal for applications requiring precise timing in temperature range of -40°C to 85°C.
EC2700TS-125.000MTR
Abracon's EC2700TS-125.000MTR is a ceramic XO Clock Oscillator with 125 MHz frequency, LVHCMOS type, and 2.5V supply voltage. Ideal for applications requiring precise timing in temperature-sensitive environments up to 70°C.
AX3DCF1-100.0000T3
Abracon's AX3DCF1-100.0000T3 is a 100MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. Operating at 1.8V, it offers fast rise time of 0.5ms and fall time of 0.5ns, making it ideal for high-speed digital circuits in temperature-sensitive environments.
DSC1001CL5-040.0000
Microchip Technology
DSC1001CL5-040.0000 by Microchip Tech is a CMOS XO Clock Oscillator with 40MHz freq, 10% stability, and 3.3V supply voltage. Ideal for applications requiring precise timing in temp range -40 to 105°C, it features surface mounting and nickel palladium gold terminal finish.
SIT8008BI-21-XXX-000.FP0000E
Sitime
SIT8008BI-21-XXX-000.FP0000E by Sitime is a PLASTIC XO Clock Oscillator with 20% Frequency Stability, 3.63V Max Supply Voltage, and 15pF Output Load. Ideal for LVCMOS applications like IoT devices, wearables, and communication systems due to its compact size (3.2mm x 2.5mm x 0.75mm) and wide operating temperature range (-40°C to 85°C).
DSC1001DI5-025.0000T
DSC1001DI5-025.0000T by Microchip Technology is a CMOS XO Clock Oscillator with 25 MHz frequency, 10% stability, and 3.3 V supply voltage. It has a compact size of 2.5mm x 2.0mm x 0.85mm and is ideal for applications requiring precise timing in temperature-sensitive environments.
DSC1123CI5-125.0000
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 10 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;
511FBA100M000AAGR
Silicon Labs
LVDS; Qualification: Not Qualified; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4; Power Supplies (V): 2.5;
DSC1001DL5-024.0000T
Microchip's DSC1001DL5-024.0000T is a CMOS XO Clock Oscillator with 24 MHz frequency, 10% stability, and AEC-Q100 screening. Ideal for automotive applications due to its compact size (2.5mm x 2.0mm x 0.85mm), wide temperature range (-40 to 105 °C), and surface mounting feature.
KC5032A16.0000CMGE00
Kyocera
Kyocera's KC5032A16.0000CMGE00 is a 16 MHz CMOS XO Clock Oscillator with 50% frequency stability, 15 pF output load, and operates at 5V. Ideal for applications requiring precise timing in a compact form factor, such as telecommunications equipment or industrial automation systems.
ASV-24.576MHZ-EJ-T
Abracon's ASV-24.576MHZ-EJ-T is a 24.576 MHz XO Clock Oscillator with 20% frequency stability, HCMOS/TTL type, and 3.63 V max supply voltage. Ideal for applications requiring precise timing in temperature-sensitive environments due to its wide operating range from -20°C to 70°C.
VCC4-B3F-100M000000TR
VCC4-B3F-100M000000TR by Microchip Technology is a ceramic XO Clock Oscillator with 100 MHz frequency stability of 25%. Operating at 3.3V, it has MIL-STD-883 screening and CMOS oscillator type. Ideal for applications requiring precise timing in harsh environments.
LTC6908HS6-1
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Package Body Material: PLASTIC/EPOXY;
XLH536012.000000I
Integrated Device Technology
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 3 ms;
CB3-3I-1M8432
Cts
CB3-3I-1M8432 by Cts is a 1.8432 MHz XO Clock Oscillator with HCMOS/TTL type, 50% frequency stability, and 5.5V max supply voltage. Ideal for applications requiring precise timing in temperature-sensitive environments due to its wide operating range from -40°C to 85°C.
530BC156M250DG
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Maximum Supply Current: 98 mA; Maximum Operating Frequency: 945 MHz; Nominal Operating Frequency: 156.25 MHz;
DSC1104BI2-100.0000T
DSC1104BI2-100.0000T by Microchip Technology is a 100 MHz XO Clock Oscillator with 25% frequency stability, HCSL type, and 3.6V max supply voltage. Ideal for applications requiring precise timing in electronic circuits with a surface-mounting feature.
LTC6991HS6#TRPBF
Analog Devices
LTC6991HS6#TRPBF by Analog Devices is a CMOS XO Clock Oscillator with 5.5V max supply voltage, 5pF output load, and 2.7ms rise time. Ideal for applications requiring precise timing in compact designs due to its small form factor of 2.9mm x 1.5mm x 1.0mm and wide operating temperature range from -40°C to 125°C.
ASE-40.000MHZ-E-T
Abracon's ASE-40.000MHZ-E-T is a 40MHz XO Clock Oscillator with 100% frequency stability, CMOS type, and 3.3V nominal voltage. Ideal for applications requiring precise timing in temperature-sensitive environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
531FB200M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
531FC25M0000DGR
Silicon Labs' 531FC25M0000DGR is a 25 MHz LVDS XO Clock Oscillator with 7% frequency stability. Operating voltage range of 2.25V to 2.75V, suitable for applications requiring precise timing in industrial and communication systems. Compact size of 7.0mm x 5.0mm x 1.85mm makes it ideal for surface mount installations in various electronic devices.
531FB125M000DGR
531FB125M000DGR by Silicon Labs is a PLASTIC/EPOXY XO Clock Oscillator with a frequency stability of 20%. It operates at a max supply voltage of 2.75V and has a max operating frequency of 945MHz. This oscillator is suitable for applications requiring precise timing in electronic devices.
531FB200M000DGR
XO, Clock;
531FC250M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Package Body Material: PLASTIC/EPOXY;
531FB125M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 945 MHz;
531FC100M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 100 MHz;
531FB106M250DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4;
531FC125M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Package Equivalence Code: DILCC6,.2;
531FA200M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Frequency: 10 MHz;
531FB150M000DG
531FB160M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 2.75 V;
531FB266M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Additional Features: TRAY;
531FC106M250DG
LVDS; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
531FC318M750DG
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Maximum Fall Time: .35 ns;
531FC148M500DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 2.75 V;
531FB160M316DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
531FB160M316DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Power Supplies (V): 2.5;
531FB160M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: .35 ms;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Qualification: Not Qualified;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved