Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 531FB200M000DG is a PLASTIC/EPOXY XO Clock Oscillator with LVDS type, operating at 10-945 MHz freq range. It has 20% stability, 2.25-2.75 V supply voltage, and -40 to 85°C temp range. Ideal for applications requiring precise timing like networking equipment and communication systems.
Median Price
$16.750
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$12.659
1k+ parts
$11.912
10k+ parts
-
Mouser Electronics
$12.650
$11.910
Nova Conductors
$13.721
Digiode
$14.164
VNN
Vyrian
Continental Prestige Electronics
$10.724
$10.510
Ampacity Inc.
$12.670
AZTECH Wire
$13.122
Corphita
$13.419
Aranea Global
$13.446
$12.909
Argo Parts USA
Authorized Procurement Solutions
The plastic/epoxy package body material makes the oscillator lightweight and durable, suitable for various applications.
With a frequency stability of 20%, this oscillator provides reliable and accurate frequency output, making it suitable for precision timing applications.
The maximum supply voltage of 2.75 V ensures safe operation and protects the oscillator from potential damage due to overvoltage.
The low maximum supply current of 98 mA makes this oscillator energy efficient and helps in reducing power consumption in the overall system.
The nominal supply voltage of 2.5 V provides a stable operating voltage for the oscillator, ensuring consistent performance.
The power supply voltage of 2.5 V simplifies the design and integration of the oscillator into various electronic systems.
The LVDS oscillator type offers low power consumption, high data rates, and noise immunity, making it suitable for high-speed digital applications.
The 6 terminals provide a secure and reliable connection to the circuit board, ensuring stable performance and accuracy.
The compact size of 7.0mm x 5.0mm x 1.85mm allows for easy integration and placement on the PCB, saving space in the overall system.
The minimum supply voltage of 2.25 V ensures flexibility in power supply options and compatibility with a wide range of electronic systems.
With a maximum operating temperature of 85°C, this oscillator can withstand high-temperature environments, making it suitable for industrial applications.
The wide operating temperature range of -40 to 85°C ensures reliable performance in extreme temperature conditions, enhancing the versatility of the oscillator.
The gold terminal finish with a nickel barrier provides excellent conductivity, corrosion resistance, and solderability, ensuring long-term reliability of the oscillator.
The nominal operating frequency of 200 MHz offers a stable and precise frequency output, suitable for various communication and timing applications.
The fast maximum fall time of 0.35 ns ensures quick signal transitions, reducing signal distortion and improving overall system performance.
The maximum symmetry of 55/45 ensures balanced signal duty cycles, which is essential for accurate timing and data transmission in digital systems.
The minimum operating frequency of 10 MHz allows for low-frequency applications, providing flexibility in various electronic systems.
The surface mounting feature simplifies the installation process and ensures secure placement on the PCB, enhancing the reliability and stability of the oscillator.
The high maximum operating frequency of 945 MHz makes this oscillator suitable for high-frequency applications such as wireless communication and data transmission.
XO Clock Oscillators 531FB200M000DG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Package Body Material:
Package Equivalence Code:
Physical Dimension:
Power Supplies (V):
Qualification:
Maximum Rise Time:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Diodes Incorporated
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
Comchip Technology
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
New Jersey Semiconductor Products
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
ACO-25.000MHZ-EK
Abracon
Abracon's ACO-25.000MHZ-EK XO Clock Oscillator operates at 25MHz with 30% frequency stability. It has a max supply voltage of 5.5V and output load of 10 TTL, 15pF. Ideal for applications requiring precise timing in environments ranging from -20°C to 70°C.
LTC6906HS6#TRPBF
Analog Devices
LTC6906HS6#TRPBF by Analog Devices is a CMOS XO Clock Oscillator with 3.6V max supply voltage, 5pF output load, and 25ms rise time. Ideal for applications requiring precise timing in a compact form factor, such as IoT devices and communication systems.
ASVMB-25.000MHZ-XY-T
Abracon's ASVMB-25.000MHZ-XY-T is a 25MHz XO Clock Oscillator with 10% frequency stability, CMOS type, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor, it operates b/w -40°C to 105°C with a rise time of 2ms and fall time of 2ns.
ECX-L33BN-148.500
Ecs International
ECX-L33BN-148.500 by Ecs International is a LVDS XO Clock Oscillator with 148.5 MHz frequency, 50% stability, and 3.465 V max supply voltage. Ideal for applications requiring precise timing in temperature-sensitive environments due to its wide operating range from -40°C to 85°C.
ASFL1-25.000MHZ-EC-T
Abracon's ASFL1-25.000MHZ-EC-T XO Clock Oscillator operates at 25MHz with 50% frequency stability. It has a max supply voltage of 3.63V and is ideal for applications requiring precise timing in temperature-sensitive environments. With HCMOS/TTL oscillator type, it offers fast rise time of 10ms and fall time of 10ns, making it suitable for various electronic devices.
XLL736322.265625X
Integrated Device Technology
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V;
AX7DAF1-106.2500C
Abracon's AX7DAF1-106.2500C is a 106.25 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. Operating at a nominal voltage of 3.3 V, it offers fast rise and fall times of 0.35 ms and 0.35 ns respectively, making it ideal for high-speed digital circuits in temperature-sensitive environments up to 85°C.
ASEMB-33.333MHZ-LY-T
Abracon's ASEMB-33.333MHZ-LY-T is a 33.333 MHz XO Clock Oscillator with 10% frequency stability, suitable for CMOS applications at 3.3V supply voltage. Its compact size of 3.2mm x 2.5mm x 0.85mm and surface mounting feature make it ideal for space-constrained electronic devices requiring precise timing control in a wide temperature range from -40°C to 85°C.
LTC6995CS6-1#PBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 2.9mm x 1.75mm x 1.0mm;
511BBA125M000AAG
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Minimum Supply Voltage: 2.97 V;
ASDMB-25.000MHZ-LY-T
Abracon's ASDMB-25.000MHZ-LY-T is a 25MHz XO Clock Oscillator with 10% frequency stability, 15pF output load, and CMOS oscillator type. Ideal for applications requiring precise timing in a compact form factor. Operating from -40 to 85°C, it features fast rise/fall times and surface mounting feature.
SG-8002CA3.6864M-SCML3
Seiko Epson
SG-8002CA3.6864M-SCML3 by Seiko Epson is a ceramic XO Clock Oscillator with 3.6864 MHz frequency, 100% stability, and 15 pF load. Ideal for applications requiring precise timing in a compact form factor like IoT devices and communication equipment.
LTC6908HS6-2#PBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 23; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 9 ns;
ASFLMB-1.0000MHZ-XY-T
Abracon's ASFLMB-1.0000MHZ-XY-T is a 1MHz XO Clock Oscillator with 10% frequency stability, CMOS type, and 3.3V supply voltage. Ideal for applications requiring precise timing in temperature range of -40 to 105°C.
ASDMB-25.000MHZ-XY-T
Abracon's ASDMB-25.000MHZ-XY-T is a 25MHz XO Clock Oscillator with 10% frequency stability, 15pF output load, and CMOS oscillator type. Ideal for applications requiring precise timing in a compact form factor. Operating temperature range from -40 to 105°C makes it versatile for various electronic devices.
ASE-50.000MHZ-L-R-T
Abracon's ASE-50.000MHZ-L-R-T is a 50MHz XO Clock Oscillator with 25% frequency stability, CMOS type, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor like IoT devices and communication equipment.
ASDMB-26.000MHZ-LC-T
Abracon's ASDMB-26.000MHZ-LC-T is a 26 MHz XO Clock Oscillator with 50% frequency stability, 15 pF output load, and CMOS oscillator type. Ideal for applications requiring precise timing in temperature-sensitive environments. Dimensions of 2.5mm x 2.0mm x 0.85mm make it suitable for compact designs in various electronic devices.
MXO45HST-3C-4M9152
Cts
MXO45HST-3C-4M9152 by Cts is a 4.9152 MHz XO Clock Oscillator with HCMOS/TTL type, 50% frequency stability, and 5.5V max supply voltage. Ideal for applications requiring precise timing in environments ranging from -20°C to 70°C.
LTC6905HS5-80#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.7 V;
545BAA100M000BAGR
Silicon Labs
Silicon Labs' 545BAA100M000BAGR XO Clock Oscillator operates at 100 MHz with LVDS type output. It features a frequency stability of 20%, max supply voltage of 3.465 V, and MIL-STD-883 screening level. Ideal for applications requiring precise timing in environments ranging from -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
531FC25M0000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.85mm;
Silicon Labs' 531FC25M0000DGR is a 25 MHz LVDS XO Clock Oscillator with 7% frequency stability. Operating voltage range of 2.25V to 2.75V, suitable for applications requiring precise timing in industrial and communication systems. Compact size of 7.0mm x 5.0mm x 1.85mm makes it ideal for surface mount installations in various electronic devices.
531FB200M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 98 mA;
531FC250M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 250 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Package Body Material: PLASTIC/EPOXY;
531FB125M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 945 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4;
531FC100M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 100 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;
531FC125M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Package Equivalence Code: DILCC6,.2;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
531FA200M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Frequency: 10 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: .35 ms;
531FB160M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 2.75 V;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Qualification: Not Qualified;
531FB266M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 2.5 V;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Additional Features: TRAY;
531FC148M500DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 2.75 V;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Frequency: 10 MHz;
531FB200M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved