Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 531FB266M000DG is a LVDS XO Clock Oscillator with 20% frequency stability, operating at 266 MHz. It has a supply voltage range of 2.25V to 2.75V and operates b/w -40°C to 85°C. Ideal for applications requiring precise timing in compact designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Nova Conductors
Ampacity Inc.
$4.010
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Corphita
This clock oscillator offers a stable frequency output, ensuring reliable performance in various applications.
The maximum supply voltage of 2.75V allows for flexibility in power requirements while ensuring safe operation.
The nominal supply voltage of 2.5V is a common operating voltage, making it compatible with many systems.
The LVDS oscillator type offers low voltage differential signaling, which helps in reducing electromagnetic interference and ensuring signal integrity.
With 6 terminals, this clock oscillator can provide multiple functionalities and connections within a compact design.
The quick rise time of 0.35 ms ensures fast and responsive signal output, ideal for high-speed applications.
The compact size of this clock oscillator makes it easy to integrate into various electronic devices and circuit boards.
The low minimum supply voltage of 2.25V ensures efficient power consumption while maintaining stable operation.
With a maximum operating temperature of 85°C, this clock oscillator can perform reliably in demanding environmental conditions.
The wide temperature range of -40°C to 85°C allows this clock oscillator to be used in diverse applications and environments.
The gold and nickel terminal finish provides excellent conductivity and corrosion resistance, enhancing the durability and longevity of the oscillator.
The nominal operating frequency of 266 MHz offers a balance between speed and power consumption, suitable for various clocking applications.
The fast fall time of 0.35 ns ensures precise signal transitions, contributing to the overall performance and stability of the clock oscillator.
With a symmetry ratio of 55/45, this clock oscillator produces balanced waveforms, minimizing signal distortion and interference.
The surface mounting feature simplifies the installation process and allows for easy integration into PCB designs, making it a convenient option for assembly.
XO Clock Oscillators 531FB266M000DG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
PCN Design/Specification - LOGO 17-Jan-2022 Mult Devices 11/Jul/2018
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Rectron
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rugao Dachang Electronic
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
SG-210STF25.0000MS3
Seiko Epson
SG-210STF25.0000MS3 by Seiko Epson is a 25 MHz XO Clock Oscillator with 25% frequency stability, CMOS type, and 15 pF output load. Ideal for applications requiring precise timing in compact devices due to its small size of 2.5mm x 2.0mm x 0.8mm and surface mounting feature. Operating temperature range from -20°C to 70°C makes it suitable for various electronic systems.
DSC1001DL5-024.0000T
Microchip Technology
Microchip's DSC1001DL5-024.0000T is a CMOS XO Clock Oscillator with 24 MHz frequency, 10% stability, and AEC-Q100 screening. Ideal for automotive applications due to its compact size (2.5mm x 2.0mm x 0.85mm), wide temperature range (-40 to 105 °C), and surface mounting feature.
ASDMB-26.000MHZ-LY-T
Abracon's ASDMB-26.000MHZ-LY-T is a 26MHz XO Clock Oscillator with 10% frequency stability, 15pF output load, and 15mA max supply current. Ideal for CMOS applications, it operates at temperatures from -40 to 85°C and has a compact size of 2.5mm x 2.0mm x 0.85mm for surface mounting.
511BCA100M000BAG
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
DSC1123CI2-100.0000T
Microchip Technology's DSC1123CI2-100.0000T is a 100MHz LVDS XO Clock Oscillator with 25% stability, suitable for applications requiring precise timing. Operating voltage range of 2.25V to 3.63V, it offers high symmetry at 52/48%. Ideal for surface mount designs in various electronic systems.
SIT8008BI-12-18E-100.000000E
Sitime
SIT8008BI-12-18E-100.000000E by Sitime is a PLASTIC XO Clock Oscillator with 25% Frequency Stability, 1.98V Max Supply Voltage, and 15pF Output Load. Ideal for LVCMOS applications requiring a 100MHz Nominal Operating Frequency in a compact 2.5mm x 2.0mm x 0.75mm package for temperatures ranging from -40 to +85 °C.
LTC6908HS6-1#TR
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 23; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 10 MHz;
AX7DBF1-312.5000C
Abracon's AX7DBF1-312.5000C is a 312.5 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 2.5 V and has a compact size of 7.0mm x 5.0mm x 1.8mm, making it ideal for surface mount installations in temperature-sensitive environments up to 85°C.
FXO-HC536R-50
Renesas Electronics
Renesas Electronics FXO-HC536R-50 is a 50 MHz HCMOS XO Clock Oscillator with 25% frequency stability. Operating at temperatures from -40°C to 85°C, it has a max supply voltage of 3.465 V and output load of 15 pF. Ideal for applications requiring precise timing in compact designs.
SIT9102AI-243N25E200.00000
SIT9102AI-243N25E200.00000 by Sitime is a LVDS XO Clock Oscillator with 50% Frequency Stability, 2.75V Max Supply Voltage, and MIL-STD-883F Screening Level. Ideal for applications requiring precise timing at temperatures ranging from -40°C to 85°C in compact designs due to its small form factor of 7.0mm x 5.0mm x 0.9mm and surface mount feature.
ASG2-LJ-100.000MHZ-513290-T
Abracon's ASG2-LJ-100.000MHZ-513290-T is a 100MHz LVDS XO Clock Oscillator with 35% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 2.5V and has a compact size of 2.5mm x 2.0mm x 1.0mm, making it ideal for space-constrained designs in various electronic devices.
EC2600TS-120.000MTR
Ecliptek
LVCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.6mm;
FXO-HC536R-25
Integrated Device Technology
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
511FBA125M000AAG
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V; Additional Features: ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT;
AX3DAF1-125.0000T
Abracon's AX3DAF1-125.0000T is a 125MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. Operating at 3.3V, it offers a max rise time of 0.4ms and fall time of 0.4ns, making it ideal for high-speed digital circuits in various electronic devices.
ASEMB-10.000MHZ-LY-T
Abracon's ASEMB-10.000MHZ-LY-T is a 10MHz XO Clock Oscillator with 10% frequency stability, 15pF output load, and CMOS type. Ideal for applications requiring precise timing in compact designs. Operates b/w -40 to 85°C, making it suitable for various electronic devices.
DSC1001DL5-025.0000
DSC1001DL5-025.0000 by Microchip is a CMOS XO Clock Oscillator with 25 MHz frequency, 10% stability, and AEC-Q100 screening. Ideal for applications requiring a 3.3 V supply voltage, it operates in temperatures ranging from -40 to 105 °C and features a compact size of 2.5mm x 2.0mm x 0.85mm for surface mounting.
SG-636PTF20.0000MC3:ROHS
SG-636PTF20.0000MC3:ROHS by Seiko Epson is a 4-terminal XO Clock Oscillator with 5V supply voltage, operating at frequencies from 2.21675 MHz to 41 MHz. It has a low current output of 16 Amp and operates in temperatures ranging from -20°C to 70°C. Ideal for applications requiring precise timing in electronic devices.
531BB300M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Package Body Material: PLASTIC/EPOXY;
ECS-2100AX-049
Ecs International
ECS-2100AX-049 by Ecs International is a XO Clock Oscillator with 4.9MHz frequency, HCMOS/TTL type, and 100% stability. Ideal for applications requiring precise timing in environments with temperatures ranging from 0 to 70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
531FC25M0000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.85mm;
Silicon Labs
Silicon Labs' 531FC25M0000DGR is a 25 MHz LVDS XO Clock Oscillator with 7% frequency stability. Operating voltage range of 2.25V to 2.75V, suitable for applications requiring precise timing in industrial and communication systems. Compact size of 7.0mm x 5.0mm x 1.85mm makes it ideal for surface mount installations in various electronic devices.
531FB200M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 98 mA;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
531FC250M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 250 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Package Body Material: PLASTIC/EPOXY;
531FB125M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 945 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4;
531FC100M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 100 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;
531FC125M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Package Equivalence Code: DILCC6,.2;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
531FA200M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Frequency: 10 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: .35 ms;
531FB160M000DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 2.75 V;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Qualification: Not Qualified;
531FB266M000DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 2.5 V;
531FC148M500DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 2.75 V;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Frequency: 10 MHz;
531FB266M000DGR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved