Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 511BBA200M000BAG is a XO Clock Oscillator with LVDS type, 200 MHz frequency, and 50% stability. Ideal for applications requiring precise timing such as networking equipment and telecommunications devices.
Median Price
$6.550
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$4.130
100+ parts
$3.080
1k+ parts
$3.040
10k+ parts
-
Element14
$6.090
$5.860
Newark
$6.650
$3.380
DigiKey
$6.670
$5.255
$5.205
Mouser Electronics
$5.210
$4.860
Verical
Richardson RFPD
$4.530
Chip1Stop
$7.470
Arrow
$4.633
Nova Conductors
$5.254
Digiode
$6.204
Ozdisan Elektronik
$11.847
VNN
Vyrian
Component Sense
Aztec Data Supply Inc.
$0.761
Corohmni
$1.597
Ampacity Inc.
$3.930
Semicontronic
$3.990
$3.890
$3.870
Continental Prestige Electronics
$5.149
Corphita
$5.877
Microchip USA
$15.060
$14.850
$14.740
$14.630
Authorized Procurement Solutions
Argo Parts USA
Netroflash
$4.991
$4.886
Perfect Parts
Glotronic Ltd.
Provides consistent and reliable timing accuracy, essential for various applications.
Wide operating voltage range allows for flexibility in power supply selection.
Suitable for driving standard loads without compromising performance.
Efficient power consumption for energy-saving operation.
Compatible with common supply voltages for easy integration.
Low Voltage Differential Signaling ensures noise immunity and signal integrity.
Simplifies installation and connection process.
Fast rise time ensures quick signal transmission.
Compact size for space-constrained applications.
Ensures operation even under low voltage conditions.
Wide temperature range suitable for diverse environmental conditions.
Operates reliably in extreme cold temperatures.
Ensures excellent conductivity and corrosion resistance.
Provides high-frequency accuracy for precision timing applications.
Fast fall time complements the rise time for efficient signal transmission.
Balanced output signal for improved performance.
Convenient surface mount design facilitates easy installation and PCB integration.
XO Clock Oscillators 511BBA200M000BAG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Package Equivalence Code:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
511BBA200M000BAG Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
ASVMPC-25.000MHZ-Z-T
Abracon
ASVMPC-25.000MHZ-Z-T by Abracon is a PLASTIC/EPOXY XO Clock Oscillator with 50% Frequency Stability, 3.6V Max Supply Voltage, and MIL-STD-883 Screening Level. It is suitable for applications requiring a CMOS oscillator with a frequency of 25 MHz and surface mounting feature.
SG-8002CA4.0960M-PHML3
Seiko Epson
SG-8002CA4.0960M-PHML3 by Seiko Epson is a ceramic XO Clock Oscillator with 4.096 MHz frequency, 5 V nominal voltage, and 85°C max operating temp. Ideal for applications requiring precise timing in compact designs due to its small size and surface mounting feature.
530BC156M250DGR
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 98 mA;
LTC6906IS6#TRM
Analog Devices
LTC6906IS6#TRM by Analog Devices is a CMOS XO Clock Oscillator with 3.6V max supply voltage, 5 pF output load, and 25 ms rise time. It operates b/w -40 to 85 °C and has a frequency range of 0.01 MHz to 1 MHz. Ideal for applications requiring precise timing in compact designs.
LTC6906IS6#TR
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V; Physical Dimension: 2.9mm x 1.75mm x 1.0mm;
DSC1001CI2-100.8000T
Microchip Technology
DSC1001CI2-100.8000T by Microchip is a 100.8 MHz XO Clock Oscillator with 25% frequency stability, suitable for AEC-Q100 applications. It operates at a max supply voltage of 3.6V and has a compact size of 3.2mm x 2.5mm x 0.9mm, making it ideal for surface mount installations in automotive and industrial environments.
LTC6908IDCB-2#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 11 ms;
LTC6995IS6-2#PBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Package Body Material: PLASTIC/EPOXY;
510BCA125M000AAG
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 125 MHz; Maximum Symmetry (%): 52/48;
ASEMB-8.000MHZ-XY-T
Abracon's ASEMB-8.000MHZ-XY-T is a 4-terminal CMOS XO Clock Oscillator with 8MHz frequency, suitable for applications requiring a supply voltage of 1.8/3.3V. With a compact size of 3.2mm x 2.5mm x 0.85mm and operating temperature range from -40°C to 105°C, it is ideal for surface mount technology in various electronic devices.
SG-8018CB123.456789M-TJHPA0
SG-8018CB123.456789M-TJHPA0 by Seiko Epson is a CMOS XO Clock Oscillator with 123.456789 MHz frequency, 50% stability, and 15 pF output load. It operates b/w -40 to 105 °C, suitable for applications requiring precise timing in compact designs with surface mount capabilities.
LTC6908IS6-1
LTC6908IS6-1 by Analog Devices is a CMOS XO Clock Oscillator with 40% frequency stability, operating from 0.05 MHz to 10 MHz. It has a max supply voltage of 5.5 V and output load of 5 pF, suitable for applications requiring precise timing in a compact form factor.
EH3600ETTS-52.4288MTR
Ecliptek
LVCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 60/40;
ISM92-3351AH-14.7456MHZ
Ilsi America
HCMOS/TTL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 5 ms;
510CBA2M09600AAG
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Minimum Supply Voltage: 2.97 V;
DSC1001CI2-100.8000
DSC1001CI2-100.8000 by Microchip Tech is a CMOS XO Clock Oscillator with 25% freq stability, 3.6V max supply voltage, and AEC-Q100 screening. Ideal for applications requiring a 100.8MHz nominal operating frequency in automotive electronics due to its compact size (3.2mm x 2.5mm x 0.9mm) and surface mounting feature.
DSC1001DI1-033.3000T
DSC1001DI1-033.3000T by Microchip is a CMOS XO Clock Oscillator with 33.3 MHz frequency, 3.3 V supply voltage, and 50% stability. Ideal for applications requiring precise timing in electronics with surface mount requirements due to its compact size and high temperature range of -40°C to 85°C.
510FBA156M250BAG
Silicon Labs
Silicon Labs' 510FBA156M250BAG is a LVDS XO Clock Oscillator with 25% frequency stability, operating at 156.25 MHz. It has a max supply voltage of 2.75 V and MIL-STD-883 screening level. Ideal for applications requiring precise timing in environments ranging from -40°C to 85°C.
VCC1-B3F-100M000000
Microsemi
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V;
ASDMB-48.000MHZ-XY-T
Abracon's ASDMB-48.000MHZ-XY-T is a 48 MHz XO Clock Oscillator with 10% frequency stability, 15 pF output load, and CMOS oscillator type. Ideal for applications requiring precise timing in temperature range of -40 to 105°C. Suitable for surface mounting with compact dimensions of 2.5mm x 2.0mm x 0.85mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
511BCA100M000BAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
LVDS; JESD-609 Code: e4; Qualification: Not Qualified; Terminal Finish: Nickel/Gold (Ni/Au); Power Supplies (V): 3.3;
511BBA200M000BAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: .8 ms;
511BCA100M000BAGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
511BCA100M000BAGR by Silicon Labs is a LVDS XO Clock Oscillator with 20% frequency stability, operating at 100 MHz. It has a max supply voltage of 3.63 V and output load of 100 OHM. Ideal for applications requiring precise timing in temperature-sensitive environments.
511BBA125M000AAG
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Minimum Supply Voltage: 2.97 V;
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4; Maximum Fall Time: .8 ns;
511BBA125M000BAG
LVDS; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
511BBA106M250BAG
511BBA200M000AAG
LVDS; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4;
511BBA100M000BAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Screening Level: MIL-STD-883;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Additional Features: TRI-STATE; ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT;
511BBA100M000AAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V;
511BBA100M000BAGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: .8 ns;
LVDS; Qualification: Not Qualified; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4; Power Supplies (V): 3.3;
511BBA203M125AAG
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved