Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 511FBA100M000AAG is a 100MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates at supply voltages b/w 2.25V to 2.75V and offers fast rise and fall times of 0.8ms and 0.8ns respectively. This surface mount oscillator is ideal for high-speed digital systems in temperature-sensitive environments.
Median Price
$4.619
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
DigiKey
1+ parts
$5.930
100+ parts
$4.670
1k+ parts
-
10k+ parts
Arrow
$4.013
Verical
Nova Conductors
$4.498
Digiode
$5.947
VNN
Vyrian
Bastille Electronics
$4.273
$4.059
$4.003
Argo Parts USA
Continental Prestige Electronics
$4.408
Corphita
$5.634
Ampacity Inc.
$7.420
AZTECH Wire
$16.821
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Perfect Parts
Allows for reliable and accurate timing in various applications.
Provides a safe operating range and compatibility with different systems.
Ensures optimal performance and signal integrity in the circuit.
Offers a standard voltage level for consistent operation.
Utilizes low voltage differential signaling for improved noise immunity.
Enables quick transitions and precise timing control.
Compact size for easy integration into various designs.
Allows for operation in lower voltage environments while maintaining stability.
Suitable for a wide range of temperature conditions.
Can operate in extreme cold environments without performance issues.
Provides corrosion resistance and robust connections.
Ideal frequency for many digital applications and communication systems.
Facilitates fast signal transitions and precise timing accuracy.
Offers balanced duty cycle for symmetric signal generation.
Allows for easy and secure installation on PCBs for efficient manufacturing.
XO Clock Oscillators 511FBA100M000AAG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
Leshan Radio
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
SG-210STF50.0000ML0
Seiko Epson
SG-210STF50.0000ML0 by Seiko Epson is a CMOS XO Clock Oscillator with 50 MHz frequency, 50% stability, and 15 pF output load. Ideal for applications requiring precise timing in electronic devices due to its compact size (2.5mm x 2.0mm x 0.8mm) and wide operating temperature range (-40°C to 85°C).
XLH536100.000000I
Integrated Device Technology
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 3.135 V;
SIT8924BM-71-33E-100.000000G
Sitime
SIT8924BM-71-33E-100.000000G by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 20% Frequency Stability, 3.63V Max Supply Voltage, and AEC-Q100 Screening Level. Ideal for LVCMOS applications requiring a 100MHz Nominal Operating Frequency in automotive electronics due to its small size (2.0mm x 1.6mm x 0.85mm) and wide temperature range (-55°C to 125°C).
510DCA100M000AAGR
Silicon Labs
HCSL; Power Supplies (V): 3.3; Qualification: Not Qualified; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
540BAA150M000BAGR
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
AX3DBF1-125.0000T
Abracon
Abracon's AX3DBF1-125.0000T XO Clock Oscillator operates at 125MHz with LVDS type, 25% frequency stability, and 2.62V max supply voltage. Ideal for applications requiring precise timing in a compact form factor such as telecommunications equipment and networking devices.
DSC1001CI2-108.0000T
Microchip Technology
DSC1001CI2-108.0000T by Microchip Technology is a CMOS XO Clock Oscillator with a frequency stability of 25%. It operates at a nominal voltage of 3.3V and has a max operating temperature of 85°C. This oscillator is commonly used in applications that require precise timing, such as telecommunications and industrial automation.
CB3LV-3I-50M0000
Cts
CB3LV-3I-50M0000 by Cts is a ceramic XO Clock Oscillator with 50% frequency stability, 3.6V max supply voltage, and 50pF output load. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial equipment due to its HCMOS/TTL oscillator type and operating frequency range of 1.5MHz to 107MHz.
XLH735025.000000I
Renesas Electronics
XLH735025.000000I by Renesas Electronics is a 25 MHz HCMOS XO Clock Oscillator with 50% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 3.3 V and has a max rise time of 3 ms, making it ideal for various electronic devices where accurate clock signals are essential.
LTC6905CS5-80#TRMPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Output Load: 5 pF;
7C-50.000MBB-T
Txc
7C-50.000MBB-T by Txc is a CMOS XO Clock Oscillator with 50 MHz frequency, 50% stability, and 15 pF output load. Ideal for applications requiring precise timing in compact devices due to its small size (5.0mm x 3.2mm x 1.2mm) and wide operating temperature range (-10°C to 70°C).
ASVMPC-50.000MHZ-Z-T
Abracon's ASVMPC-50.000MHZ-Z-T is a 50 MHz XO Clock Oscillator with 50% frequency stability, MIL-STD-883 screening, and CMOS technology. Operating voltage range of 2.25V to 3.6V makes it suitable for various applications requiring precise timing in harsh environments. Its compact size of 7.0mm x 5.0mm x 0.85mm and surface mount feature enhance ease of integration in electronic designs.
ASDMB-12.000MHZ-XY-T
Abracon's ASDMB-12.000MHZ-XY-T is a 12MHz XO Clock Oscillator with 10% frequency stability, CMOS technology, and 15pF output load. Ideal for applications requiring precise timing in temperature ranges from -40°C to 105°C.
510DCA100M000AAG
HCSL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V;
LTC6991MPS6#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -55 Cel; Maximum Supply Voltage: 5.5 V;
VCC4-B3F-100M000000TR
VCC4-B3F-100M000000TR by Microchip Technology is a ceramic XO Clock Oscillator with 100 MHz frequency stability of 25%. Operating at 3.3V, it has MIL-STD-883 screening and CMOS oscillator type. Ideal for applications requiring precise timing in harsh environments.
DSC1104BI2-100.0000T
DSC1104BI2-100.0000T by Microchip Technology is a 100 MHz XO Clock Oscillator with 25% frequency stability, HCSL type, and 3.6V max supply voltage. Ideal for applications requiring precise timing in electronic circuits with a surface-mounting feature.
SIT1602AC-82-33E-25.000000X
SIT1602AC-82-33E-25.000000X by Sitime is a 25MHz XO Clock Oscillator with 25% frequency stability, LVCMOS type, and 15pF output load. Ideal for applications requiring precise timing in temperature range of -20 to 70°C.
SG-8002CA64.0000M-PCMB
SG-8002CA64.0000M-PCMB by Seiko Epson is a CMOS XO Clock Oscillator with 64 MHz frequency, 100% stability, and 15 pF output load. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
XLL736322.265625X
Renesas Electronics XLL736322.265625X is a LVDS XO Clock Oscillator with 25% frequency stability, operating at 322.265625 MHz. It has a max supply voltage of 3.465 V and output load of 100 OHM, suitable for applications requiring precise timing in temperature-sensitive environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
511FBA125M000AAG
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V; Additional Features: ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT;
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Output Load: 100 OHM;
511FBA200M000BAG
LVDS; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
LVDS; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4;
511FBA125M000BAG
511FBA100M000AAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
511FBA100M000AAGR
LVDS; Qualification: Not Qualified; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4; Power Supplies (V): 2.5;
511FAA200M000BAGR
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: .8 ns; Nominal Operating Frequency: 200 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Nickel/Gold (Ni/Au); JESD-609 Code: e4;
511FCA000292CAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 3.2mm x 2.5mm x 1.1mm;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;
511FBA200M000AAG
511FBA250M000BAGR
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 2.75 V; Nominal Supply Voltage: 2.5 V;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;
511FBA000331BAGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Package Equivalence Code: SOLCC6,.12;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 2.75 V;
511FBA100M000BAGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Qualification: Not Qualified;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved