Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LVPECL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Corphita
XO Clock Oscillators 511ACA156M250AAG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Package Body Material:
Package Equivalence Code:
Physical Dimension:
Power Supplies (V):
Qualification:
Maximum Rise Time:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
PCN Design/Specification - Mult Devices 11/Jul/2018
PCN Assembly/Origin - DiamondX 10-24-22
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
Sensitron Semiconductor
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
Taitron Components
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
Shenzhen Yixinsemi Electronics
LTC6908CS6-1#TRPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 2.9mm x 1.5mm x 1.0mm; Maximum Operating Frequency: 10 MHz;
SIT9121AC-2D3-33E100.000000
Sitime
SIT9121AC-2D3-33E100.000000 by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 100 MHz frequency, LVDS type, and 50% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, it operates at 3.3 V with low supply current of 55 mA.
SIT8008BI-83-33E-100.000000X
SIT8008BI-83-33E-100.000000X by Sitime is a 100 MHz LVCMOS XO Clock Oscillator with 3.3V supply, 50% stability, and 15 pF load. Ideal for applications requiring precise timing in temperature range of -40 to 85°C, it features surface mounting and compact size of 7.0mm x 5.0mm x 0.9mm.
DSC1103BI2-148.5000
Microchip Technology
Microchip Technology's DSC1103BI2-148.5000 XO Clock Oscillator offers 25% Frequency Stability at 148.5 MHz with LVDS type output. Operating b/w -40 to 85 °C, it has a Max Supply Voltage of 3.63 V and is ideal for applications requiring precise timing in compact designs.
SIT1532AC-J5-DCC-32.768D
SIT1532AC-J5-DCC-32.768D by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 75% Frequency Stability, LVCMOS Technology, and 1.54mm x 0.84mm x 0.6mm Physical Dimension. It operates at 0.032768 MHz, suitable for applications requiring precise timing in temperature-sensitive environments like IoT devices and wearables due to its low power consumption of 0.0013 mA at a max supply voltage of 3.63 V.
MX573NBB311M040-TR
MX573NBB311M040-TR by Microchip Technology is a LVDS XO Clock Oscillator with 311.04 MHz frequency, 50% stability, and 3.63 V max supply voltage. Ideal for applications requiring precise timing in environments ranging from -40°C to 85°C.
ASV-40.000MHZ-EJ-T
Abracon
Abracon's ASV-40.000MHZ-EJ-T is a 40MHz XO Clock Oscillator with 20% frequency stability, HCMOS/TTL type, and 3.3V nominal voltage. Ideal for applications requiring precise timing in electronics, telecommunications, and networking systems due to its compact size and reliable performance.
ECS-327MVATX-2-CN-TR
Ecs International
ECS-327MVATX-2-CN-TR by Ecs International is a CMOS XO Clock Oscillator with 25% Frequency Stability, 3.6V Max Supply Voltage, and 15pF Output Load. Ideal for applications requiring precise timing in temperature-sensitive environments due to its -40°C to 85°C operating range and compact size of 2.5mm x 2mm x 1mm.
XLH536025.000000I
Integrated Device Technology
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 3.135 V;
DSC1123CI2-125.0000T
Ael Crystals
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 125 MHz;
CO43025-12.000-EXT-TR
Raltron Electronics
Raltron Electronics CO43025-12.000-EXT-TR is a 12 MHz XO Clock Oscillator with 25% frequency stability, 3.63 V max supply voltage, and 5 TTL output load. Ideal for applications requiring precise timing in temperature-sensitive environments.
FXO-HC536R-12
HCMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF; Minimum Operating Temperature: -40 Cel;
ASDMB-12.000MHZ-LY-T
Abracon's ASDMB-12.000MHZ-LY-T is a 12 MHz XO Clock Oscillator with 10% frequency stability, 15 pF output load, and CMOS oscillator type. Ideal for applications requiring precise timing in temperature range of -40 to 85°C. Dimensions are 2.5mm x 2.0mm x 0.85mm, making it suitable for surface mounting feature.
AX3HCF1-100.0000
Abracon's AX3HCF1-100.0000 is a 100MHz HCSL XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 1.8V and has a compact size of 3.2mm x 2.5mm x 1.0mm, making it ideal for space-constrained designs in various electronic devices.
CB3LV-5I-20M0000
Cts
CB3LV-5I-20M0000 by Cts is a ceramic XO Clock Oscillator with 20MHz frequency, 25% stability, and HCMOS/TTL type. Ideal for applications requiring precise timing in electronics due to its compact size and wide operating temperature range from -40°C to 85°C.
SIT1602BI-21-18S-33.330000E
SIT1602BI-21-18S-33.330000E by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 20% Frequency Stability, 1.8V Nominal Voltage, and MIL-STD-883F Screening Level. Ideal for applications requiring precise timing at 33.33 MHz such as communication systems or industrial automation due to its LVCMOS/HCMOS Oscillator Type and compact size of 3.2mm x 2.5mm x 0.85mm for surface mount installation.
ASEMB-100.000MHZ-XY-T
Abracon's ASEMB-100.000MHZ-XY-T is a CMOS XO Clock Oscillator with 100MHz frequency, 3.3V supply voltage, and 15mA current. Ideal for applications requiring precise timing in a compact 3.2mm x 2.5mm package, operating b/w -40°C to 105°C temperature range.
FXO-HC735-2.048
HCMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4; Minimum Supply Voltage: 3.135 V;
ECS-1612MV-250-CN-TR
ECS-1612MV-250-CN-TR by Ecs International is a ceramic XO Clock Oscillator with 25MHz frequency, 15pF output load, and HCMOS type. Ideal for applications requiring precise timing in a compact form factor. Operating temperature range from -40°C to 85°C makes it versatile for various environments.
SG-8002CA4.0960M-PHML3
Seiko Epson
SG-8002CA4.0960M-PHML3 by Seiko Epson is a ceramic XO Clock Oscillator with 4.096 MHz frequency, 5 V nominal voltage, and 85°C max operating temp. Ideal for applications requiring precise timing in compact designs due to its small size and surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved