Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Minimum Quality Factor (at L-nom): 20;
Median Price
$0.360
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.243
1k+ parts
$0.184
10k+ parts
$0.160
DigiKey
$0.410
$0.261
$0.187
-
TTI Europe
$0.155
Nova Conductors
$0.221
Vyrian
ComSIT Distribution GmbH
Q Components
VNN
Ampacity Inc.
$0.132
Semicontronic
$0.129
$0.128
Continental Prestige Electronics
$0.217
Argo Parts USA
$0.214
Corohmni
$0.954
Perfect Parts
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Kepictronics
Fixed Inductors B82422-T1104-K attributes and parameters. Explore more Fixed Inductors devices from Siemens
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Shielded:
Core Material:
Surface Mounted:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
JESD-609 Code:
B82422-T1104-K Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Product Change Notification (PDF)
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99WT1G
Silicon Transistor
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
Infinex
IHLP3232DZER3R3M01
Vishay Intertechnology
Vishay Intertechnology's IHLP3232DZER3R3M01 is a shielded fixed inductor with 3.3uH nominal inductance, 9.2A max current, and 125°C max operating temp. Ideal for DC-DC converters, this SMT inductor has a self-resonance frequency of 25MHz and 0.0177 ohm DC resistance.
SRR0604-101KL
Bourns
The Bourns SRR0604-101KL is a shielded, surface mount fixed inductor with 100uH nominal inductance. It operates b/w -40°C to 125°C, with a max rated current of 0.4A. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 13MHz and features dual-ended terminals.
LQW15AN12NG00D
Murata Manufacturing
LQW15AN12NG00D by Murata is a wirewound chip inductor with 0.012 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 5500 MHz. This SMT inductor features dual-ended terminals and matte tin finish over nickel, making it ideal for general purpose use.
HK100515NJ-TV
Taiyo Yuden
HK100515NJ-TV by Taiyo Yuden is a fixed inductor with 0.015 uH nominal inductance, suitable for RF applications. It features dual-ended terminals, 0402 case size, and operates at temperatures ranging from -55 to 125 °C. With a max rated current of 0.3 A and self-resonance frequency of 2300 MHz, it is ideal for general purpose inductor needs.
7447714101
Wuerth Elektronik & Kg
Wurth Elektronik 7447714101 is a shielded, dual-ended power inductor with 100uH nominal inductance. It has a max rated current of 1.5A and operates b/w -40 to 150°C. Ideal for general purpose applications requiring high inductance and low DC resistance.
DRA124-4R7-R
Eaton Corporation
The Eaton Corporation DRA124-4R7-R is a shielded fixed inductor with 4.7uH nominal inductance, 9.06A max rated current, and -40 to 165°C operating temperature range. Ideal for general purpose applications requiring high performance and reliability in compact SMT packages.
LQW18AN27NG10D
Murata Manufacturing's LQW18AN27NG10D is a wirewound chip inductor with 0.027uH nominal inductance, 2800MHz self-resonance frequency, and 42 min quality factor. Ideal for RF applications, this SMT component operates b/w -55 to 125 °C with a max rated current of 0.59A.
CM453232-470KL
Bourns CM453232-470KL is a 47uH SMT inductor with dual-ended terminals, ideal for RF applications. Featuring 10% tolerance, 5 ohm DC resistance, and 100°C max operating temp, it's a general-purpose component in a compact 1812 package. With a self-resonance frequency of 10 MHz and ferrite core material, it ensures high performance in various electronic circuits.
IHLP2020CZER1R5M01
Vishay Intertechnology's IHLP2020CZER1R5M01 is a shielded, high current inductor with 1.5uH nominal inductance and 7.2A max rated current. Ideal for general purpose applications, this SMT inductor has a compact 2020 size, operates b/w -55 to 125 °C, and features a self-resonance frequency of 42 MHz.
36501E3N9JTDG
TE Connectivity
TE Connectivity's 36501E3N9JTDG is a surface mount fixed inductor with dual-ended terminals, ideal for RF applications. Featuring a nominal inductance of 0.0039 uH and max rated current of 0.84 A, this general purpose inductor operates b/w -40 to 125 °C with a self-resonance frequency of 5800 MHz.
DRA124-681-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; DC Resistance: 1.96 ohm;
P0848NL
Pulse Electronics
Pulse Electronics P0848NL is a fixed inductor with 50uH nominal inductance, 5A max current, and -40 to 130°C operating temp. Ideal for power applications, it features radial terminal placement, toroid construction, and a rectangular package design.
VLF302515MT-2R2M-CA
TDK
GENERAL PURPOSE INDUCTOR;
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
MLF2012DR56KT000
MLF2012DR56KT000 by TDK is a shielded, surface mount fixed inductor with 0.56 uH nominal inductance. Ideal for RF applications, it has a max operating temperature of 125°C and self-resonance frequency of 150 MHz.
B82471A1104K000
The TDK B82471A1104K000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It has a max rated current of 0.52A and operates b/w -55°C to 150°C. Ideal for power applications requiring a general purpose inductor with a compact rectangular package design.
DFE252012F-1R0M=P2
Toko
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
CBMF1608T100K
CBMF1608T100K by Taiyo Yuden is a 0603 fixed inductor with 10uH nominal inductance, 0.115A max current, and 32MHz self-resonance freq. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 105°C.
LQG15HS27NJ02D
LQG15HS27NJ02D by Murata is a 0402-sized multilayer chip inductor with 0.027 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, self-resonance frequency of 1700 MHz, and DC resistance of 0.46 ohm. Ideal for general purpose use, this SMT inductor features dual-ended terminals with matte tin finish.
CM453232-102KL
Bourns CM453232-102KL is a surface mount fixed inductor with 1000uH nominal inductance, 40 ohm DC resistance, and 10% tolerance. Ideal for RF applications, this general purpose inductor has dual-ended terminals and operates b/w -40°C to 100°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B82472G4104M000
The TDK B82472G4104M000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It operates b/w -55°C to 125°C, with a max rated current of 0.56A. Ideal for power applications requiring a general purpose inductor in a compact rectangular package.
B82472-G4104-M
The TDK B82472-G4104-M is a shielded, surface mount fixed inductor with 100uH nominal inductance. It operates b/w -55 to 125 °C and has a max rated current of 0.56A. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
B82462A4473K000
The TDK B82462A4473K000 is a fixed inductor with 47uH nominal inductance, 0.64 ohm DC resistance, and 10% tolerance. It is a power inductor suitable for general purpose applications, featuring dual-ended terminals and ferrite core material. This SMT component operates b/w -55°C to 150°C with a max rated current of 0.54A.
B82476A1104M000
B82476A1104M000 by TDK is a surface mount fixed inductor with a nominal inductance of 100 uH and max rated current of 1.3 A. It is a general purpose inductor suitable for power applications, with a rectangular package measuring 12.95 mm in length, 9.4 mm in width, and 5.08 mm in height.
B82422-A1103-K100
Siemens
Siemens B82422-A1103-K100 is a surface mount fixed inductor with 10uH nominal inductance, 0.18A max current, and 1.6 ohm DC resistance. Ideal for RF applications due to its 25MHz self-resonance frequency and ferrite core material. Dual-ended terminals with J bend shape make it versatile for various circuit designs.
B82422A1103K100
The TDK B82422A1103K100 is a 10uH SMT inductor with 27 min Q factor, suitable for RF applications. It has a max operating temp of 150°C, 0.18A rated current, and self-resonance frequency of 25MHz. Ideal for general purpose use in automotive electronics due to AEC-Q200 compliance.
B82498F1472J000
The TDK B82498F1472J000 is a 0805 SMT fixed inductor with 4.7uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, DC resistance of 3.8 ohm, and self-resonance frequency of 210 MHz. Ideal for general purpose use due to its compact rectangular package design and high quality factor at nominal inductance.
B82479-A1104-M
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
B82472P6104M000
B82422A1102K100
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
B82422-A1102-K100
Siemens B82422-A1102-K100 is a surface mount RF inductor with 1uH nominal inductance, 0.38A max current, and 320MHz self-resonance frequency. Ideal for general purpose applications requiring high quality factor and low DC resistance.
B82464-G4103-M
B82462G4103M000
B82462G4103M000 by TDK is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.5A max rated current. Ideal for power applications, this general purpose inductor has a DC resistance of 0.062 ohm and operates b/w -55°C to 150°C temperature range.
B82479A1105M000
The TDK B82479A1105M000 is a surface mount fixed inductor with 1000uH nominal inductance, suitable for power applications. It has a max rated current of 0.56A and operates b/w -55°C to 150°C. The inductor features dual-ended terminals, ferrite core material, and comes in a rectangular package measuring 18.54mm x 15.24mm x 7.11mm (LxWxH).
B82498F3331J000
B82476A1103M000
B82476A1103M000 by TDK is a fixed inductor with 10uH nominal inductance, 3.9A max rated current, and -55 to 150°C operating temperature range. Ideal for power applications, this SMT inductor features dual-ended terminals and ferrite core material.
B82422A1104K100
B82422-A1104-K100
Siemens B82422-A1104-K100 is a surface mount RF inductor with 100uH nominal inductance, 0.065A max current, and 27 min quality factor at 0.1MHz. It is a general purpose inductor with ferrite core, suitable for various applications requiring high-frequency performance.
B82432A1103K000
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved