Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 25 ohm; No. of Terminals: 2; Thermistor Application: OVERLOAD PROTECTION; Terminal Shape: J BEND;
Median Price
$1.422
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.040
100+ parts
$1.390
1k+ parts
$1.090
10k+ parts
$1.010
Future Electronics
-
$0.805
Nova Conductors
$0.795
IBS Electronics
$1.638
VNN
ACDS - Activité Composants Distribution Service
Bristol Electronics
$1.031
$0.578
$0.544
NAC Semi
$1.340
$1.240
Contempo Components LLC
Vyrian
Velocity Electronics
ComSIT Distribution GmbH
ComSIT USA
Corohmni
$0.052
Aztec Data Supply Inc.
$0.333
Argo Parts USA
Continental Prestige Electronics
$0.780
Perfect Parts
Glotronic Ltd.
Cyclops Electronics Ltd (Excess)
Authorized Procurement Solutions
Netroflash
$0.756
$0.740
Non-linear Resistors B59215-P1080-A62 attributes and parameters. Explore more Non-linear Resistors devices from Siemens
Mounting Type:
No. of Terminals:
Shape (Package):
Rated AC Voltage (URac):
Resistance:
Resistor Type:
Sub-Category:
Terminal Shape:
Thermistor Application:
B59215-P1080-A62 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1552200253
Molex
WIRE AND CABLE;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
Multicomp Pro
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NTHS0603N02N1002JE
Vishay Intertechnology
Vishay Intertechnology's NTHS0603N02N1002JE is a 10k ohm NTC thermistor with 5% tolerance, suitable for temperature compensation applications. It has a thermal sensitivity index of 3486 K and can operate b/w -40°C to 125°C. The dual-ended rectangular package with wraparound terminals allows for easy surface mount installation.
B72220-S461-K101
TDK
The TDK B72220-S461-K101 is a VARISTOR with 460V max circuit RMS voltage and 195J max energy absorption. It has a radial terminal placement, wire terminals, and operates b/w -40°C to 85°C. Ideal for surge protection in various electronic applications.
NTCALUG01A103F161A
Vishay Intertechnology's NTCALUG01A103F161A is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, it features radial terminal placement and tin finish, suitable for chassis mount installations.
60R050XU
Littelfuse
60R050XU by Littelfuse is a PTC resettable fuse with resistance of 0.5 ohm and operating voltage of 60V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. This non-linear resistor has a max operating temperature of 85°C and min of -40°C, meeting CUL, TUV, and UL standards.
NTHS1206N01N1003JE
Vishay Intertechnology's NTHS1206N01N1003JE is a NTC thermistor with 100k ohm resistance, 5% tolerance, and 0.28W power dissipation. Ideal for temperature compensation applications, it operates b/w -40°C to 125°C with thermal sensitivity index of 3974K. This surface mount device features dual-ended terminals in a rectangular package.
2920L500/16MR
2920L500/16MR by Littelfuse is a PTC resettable fuse with resistance of 0.005 ohm and operating voltage of 16V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and surface mounting type. With a compact SMT package style, it ensures reliable performance from -40 to 85°C.
0ZCG0030FF2C
Bel Fuse
Bel Fuse's 0ZCG0030FF2C is a PTC resettable fuse with resistance of 0.2 ohm, operating voltage of 30V, and rated power dissipation of 0.8W. Ideal for temperature sensing applications, it features dual-ended terminals in a surface mount package style.
MF-RX375/72-0
Bourns MF-RX375/72-0 is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 72V, and max circuit DC voltage of 72V. It's used for overcurrent protection in applications requiring radial terminal placement and through-hole mounting.
TFPT0603L1001FM
Vishay Intertechnology's TFPT0603L1001FM is a PTC thermistor with 1000 ohm resistance, 1% tolerance, and 0.075 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and rectangular package shape. Operating b/w -55°C to 150°C, it offers reliable performance in diverse environments.
GA10K3A1AM
TE Connectivity
TE Connectivity's GA10K3A1AM is a non-linear resistor with 10000 ohm resistance, suitable for temperature sensing applications. With a rated temperature of 25°C to 90°C, it features radial terminal placement and chassis mount package style. Its thermal sensitivity index is 3976 K, making it ideal for precise temperature measurements in various electronic devices.
B72220S2421K101
B72220S2421K101 by TDK is a VARISTOR with 420V RMS and 560V DC max circuit voltage. It has a METAL OXIDE FILM tech, 273J energy capacity, and operates b/w -40 to 105°C. Ideal for surge protection in various electronic applications due to its high energy absorption and temperature range.
B57364S0100M000
TDK B57364S0100M000 is a NTC thermistor with 10 ohm resistance, 20% tolerance, and 5.1 W power dissipation. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. Operating temperature ranges from -55 to 170 °C.
B72214S0511K101
The TDK B72214S0511K101 is a VARISTOR with 510V max circuit RMS voltage and 110J energy absorption. It operates b/w -40 to 105°C, ideal for surge protection in various electronic applications. With radial terminal placement and metal oxide technology, it offers reliable performance in bulk packaging.
RUEF900
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .02 ohm; Rated Power Dissipation (P): 4.2 W; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE;
MF-R050-AP-17
Bourns MF-R050-AP-17 is a PTC resettable fuse with resistance of 0.41 ohm, operating voltage of 60V, and max temp of 85°C. Ideal for overcurrent protection in various applications due to radial terminal placement and matte tin finish. CUL, TUV, UL certified for quality assurance.
NTCS0603E3103JLT
Vishay Intertechnology's NTCS0603E3103JLT is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 3435 K thermal sensitivity index. It is used for temperature sensing applications in automotive electronics due to its dual-ended terminal placement and surface mount package style. The thermistor has a rated temperature range from -40°C to 150°C, making it suitable for various environmental conditions.
V5.5MLA0805LNH
V5.5MLA0805LNH by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.1J energy capacity. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and is ideal for surge protection in SMT applications at temperatures ranging from -40 to 125°C.
V250LA20AP
V250LA20AP by Littelfuse is a VARISTOR with 250V URac and 330V operating voltage. It has a max energy absorption of 72J, ideal for TEMPERATURE COMPENSATION applications. With radial terminal placement and metal oxide film technology, it operates b/w -55°C to 125°C effectively.
1812L150/24MR
1812L150/24MR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm. It features dual-ended terminals in a rectangular SMT package. Primarily used for overcurrent protection, it has a temperature range from -40 to 85 °C and meets CUL, TUV, and UL standards.
B72214S0441K101
The TDK B72214S0441K101 is a VARISTOR with 95J energy capacity, 440V RMS voltage, and 585V operating voltage. Ideal for surge protection in applications requiring high energy absorption like power supplies and industrial equipment. With radial terminal placement and metal oxide technology, it operates b/w -40°C to 105°C efficiently.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B59219J0130A020
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 25 %; Terminal Shape: WIRE;
B59215-P1080-A62
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 25 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 25 %; Terminal Finish: Tin (Sn);
B59215P1080A062
TDK B59215P1080A062 is a PTC thermistor with 25 ohm resistance, rated AC voltage of 63V. It is used for overload protection in various applications. Its dual-ended terminal placement and rectangular package make it suitable for surface mounting.
B59215-P1120-A62
Siemens
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 25 ohm; Thermistor Application: OVERLOAD PROTECTION; Terminal Shape: J BEND; Rated AC Voltage (URac): 80 V;
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 25 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 25 %; JESD-609 Code: e2;
B59215P1120A062
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 25 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 25 %; JESD-609 Code: e3;
B59215P1120A062Z15
B59215P1120A062Z5
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 25 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 25 %; Terminal Finish: TIN;
B59215P1080A062Z5
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Manufacturer Series: B59215; Packing Method: TR, BLISTER, 13 INCH; Terminal Shape: J BEND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved