Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
1812L150/24MR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm. It features dual-ended terminals in a rectangular SMT package. Primarily used for overcurrent protection, it has a temperature range from -40 to 85 °C and meets CUL, TUV, and UL standards.
Median Price
$0.310
Lifecycle Status
Suppliers In-Stock
34
In-Stock Inventory
1k+
Farnell
1+ parts
$0.532
100+ parts
$0.338
1k+ parts
$0.263
10k+ parts
-
Mouser Electronics
$0.680
$0.475
$0.312
$0.300
Element14
$0.782
$0.566
$0.448
TTI Europe
$0.234
$0.211
DigiKey
$0.314
$0.262
Future Electronics
Arrow
$0.243
$0.235
Verical
Chip1Stop
$0.217
Newark
$0.362
$0.323
TTI
$0.246
Nova Conductors
$0.275
NAC Semi
Component Electronics Inc.
$0.380
$0.290
$0.250
Maritex
$0.385
$0.093
$0.057
$0.051
IBS Electronics
$0.975
$0.365
$0.330
Cyclops Electronics Ltd
Chip Stock
Rutronik
$0.269
$0.247
Vyrian
Bristol Electronics
Inventory MP
Sensible Micro Corp
Dan-Mar Components
ComSIT Distribution GmbH
SPM Sales
ACDS - Activité Composants Distribution Service
VNN
Semtec, LLC
Prism Electronics
PC Components Company LLC
Next Level Components, LLC
Semi Source
Atlantic Semiconductor
Advanced Electronics
$0.040
$0.038
Corohmni
$0.153
Semicontronic
$0.168
$0.164
$0.163
Argo Parts USA
$0.265
$0.257
Netroflash
$0.261
$0.255
Aztec Data Supply Inc.
$0.373
Continental Prestige Electronics
$0.493
$0.344
$0.254
$0.229
Kepictronics
Perfect Parts
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
GreenTree Electronics
Authorized Procurement Solutions
Speed Components Ltd (Excess)
This thermistor is specifically designed for overcurrent protection, ensuring the safety of the circuit by limiting the current flow.
Dual ended terminal placement allows for easy and convenient connection in the circuit, making installation and maintenance hassle-free.
The rectangular package shape provides a compact design, saving space on the circuit board and allowing for efficient placement.
The TR packing method with 7-inch packaging ensures safe and secure transportation of the product, minimizing the risk of damage during shipping.
With a low resistance of 0.04 ohms, this thermistor offers efficient current limiting performance and helps protect the circuit from overcurrent conditions.
The SMT package style allows for easy surface mounting on the circuit board, contributing to a streamlined manufacturing process.
The wraparound terminal shape provides a secure and reliable connection, ensuring stable operation of the thermistor in the circuit.
With a high maximum operating temperature of 85°C, this thermistor can withstand elevated temperatures, making it suitable for a wide range of applications.
The low minimum operating temperature of -40°C allows for reliable performance even in harsh environmental conditions, making it a versatile choice for various applications.
The matte tin terminal finish provides corrosion resistance and ensures a stable electrical connection, enhancing the durability and longevity of the thermistor.
With a low package height of 1.8 mm, this thermistor offers a slim profile, making it suitable for compact electronic devices and space-constrained applications.
This thermistor functions as a PTC resettable fuse, providing reliable overcurrent protection and preventing damage to the circuit in case of a fault.
The package length of 4.73 mm offers a balance between compact design and easy handling, making it a practical choice for various electronic applications.
The surface mounting type simplifies the installation process and allows for efficient placement on the circuit board, contributing to a streamlined manufacturing process.
Compliance with recognized standards such as CUL, TUV, and UL ensures the quality and safety of the thermistor, making it a reliable choice for electronic applications.
With a package width of 3.41 mm, this thermistor offers a compact footprint, allowing for space-efficient integration into the circuit board layout.
Non-linear Resistors 1812L150/24MR attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
1812L150/24MR Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
North American Philips Discrete Products Div
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
LM358AN
National Semiconductor
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
Micro Commercial Components
B57237-S509-M
TDK B57237-S509-M NTC Thermistor with 5 ohm resistance, 265 V URac, and 3.1 W rated power dissipation. Ideal for soft start applications due to its thermal sensitivity index of 2900 K and -55 to 170 °C operating temperature range.
GA10K3MCD1
TE Connectivity
TE Connectivity's GA10K3MCD1 is a non-linear resistor with 10000 ohm resistance, rated for temperatures from -40 to 125 °C. It features radial terminal placement and tubular package shape, suitable for temperature sensing applications. With a thermal sensitivity index of 3976 K, it offers precise measurements in chassis mount installations.
TFPT1206L6201JV
Vishay Intertechnology's TFPT1206L6201JV is a PTC thermistor with 6200 ohm resistance, 5% tolerance, and 0.125 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and rectangular package shape. Operating temperature ranges from -55°C to 150°C making it suitable for diverse environments.
V430CH8
Intersil
Non-linear Resistors; Mounting Type: SURFACE MOUNT; Operating Voltage: 369 V; Maximum Circuit DC Voltage: 369 V; Package Style (Meter): Chip / Die; Maximum Circuit RMS Voltage: 275 V;
2920L110/60MR
Littelfuse
2920L110/60MR by Littelfuse is a PTC resettable fuse with resistance of 0.12 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and matte tin finish, it operates b/w -40 to 85 °C.
MF-R010
Bourns
The Bourns MF-R010 is a PTC resettable fuse with 2.5 ohm resistance and 60V operating voltage. It features radial terminal placement, matte tin finish, and operates b/w -40 to 85 °C. Ideal for overcurrent protection in various electronic applications due to its compact disk package design.
EZJZ1V330GA
Panasonic
The Panasonic EZJZ1V330GA is a VARISTOR resistor with 2 terminals, operating voltage of 26V, and max circuit DC voltage of 26V. It has a rectangular SMT package with dual-ended terminal placement for surface mount applications. With an operating temperature range from -40°C to 85°C, it is suitable for various electronic devices requiring transient voltage suppression.
B59701-A90-A62
TDK's B59701-A90-A62 is a PTC thermistor with 1000 ohm resistance, 5% tolerance, and rated AC voltage of 25V. It is used for temperature sensing applications with a max operating temperature of 125°C and min of -40°C. The dual-ended rectangular package has wraparound terminals and surface mounting type.
B72220-S301-K101
The TDK B72220-S301-K101 is a VARISTOR with 300V URac and 385V operating voltage. It has a max energy absorption of 173J, suitable for surge protection in circuits. With radial terminal placement and metal oxide film technology, it is ideal for through-hole mounting applications.
NTCG103JF103FT1S
NTCG103JF103FT1S by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 5V operating voltage. Ideal for temperature sensing applications due to its high thermal sensitivity index of 3435 K and AEC-Q200 reference standard compliance. Package style is SMT with dual-ended terminals for surface mounting type.
MF-R185-0-99
The Bourns MF-R185-0-99 is a PTC resettable fuse with 30V operating voltage, ideal for overcurrent protection. It features radial terminal placement, matte tin finish, and operates b/w -40°C to 85°C. Commonly used in applications requiring bulk packaging and through-hole mounting.
B57321V2103J60
B57321V2103J60 by TDK is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 3980 K thermal sensitivity index. It is used for temperature compensation in various applications due to its dual-ended terminal placement and surface mount package style. With an operating temperature range from -55°C to 125°C, it offers precise thermal sensing capabilities.
VC06AG183R0YAT3A
KYOCERA AVX
VC06AG183R0YAT3A by KYOCERA AVX is a VARISTOR resistor with dual-ended terminals and SMT package style. It operates b/w -55°C to 125°C, with max circuit DC voltage of 18V and RMS voltage of 14V. Ideal for surface mount applications requiring protection against overvoltage conditions.
CG0603MLC-05LEA
Bourns CG0603MLC-05LEA is a VARISTOR with 25V max RMS voltage and 5V operating voltage. It has dual-ended terminals, surface mounting type, and operates b/w -40°C to 125°C. Ideal for AEC-Q200 compliant applications requiring protection against overvoltage in compact designs.
SL321R036
Ametherm
Ametherm's SL321R036 is a 1 ohm NTC thermistor with 20% tolerance. It features radial terminal placement in a disk package, suitable for temperature sensing applications. With through-hole mounting and wire terminals, it offers precise thermal measurement capabilities.
RF1335-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .6 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 30 V; Thermistor Application: OVERCURRENT PROTECTION;
B72530T0300K062
The TDK B72530T0300K062 is a VARISTOR with 2J energy capacity, 30V RMS voltage, and -55 to 150°C operating range. Ideal for surge protection in SMT applications due to its dual-ended terminals and compact rectangular package design.
RXEF185K-AP
TE Connectivity's RXEF185K-AP is a PTC resettable fuse with resistance of 0.19 ohm and rated power dissipation of 2.1W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. Operating voltage is 72V with dimensions of 16.76mm x 3mm x 23mm, suitable for through hole mounting in various industries.
V275LA20APX1347
V275LA20APX1347 by Littelfuse is a VARISTOR with 275V URac, 75J energy capacity, and -55 to 125°C operating temp. Used for TEMPERATURE COMPENSATION in circuits requiring protection against voltage surges. RADIAL package style with THROUGH HOLE MOUNT for easy installation.
RF1353-000
TE Connectivity's RF1353-000 is a PTC resettable fuse with resistance of 0.25 ohm and operating voltage of 13.2V. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1812L110/33MR
1812L110/33MR by Littelfuse is a PTC resettable fuse with resistance of 0.06 ohm and max circuit DC voltage of 33V. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. Operating temperature ranges from -40°C to 85°C, meeting CUL, TUV, and UL standards.
1812L110/33MR-A
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 33 V; Width (Package): 3.41 mm;
1812L050/30PR
1812L050/30PR by Littelfuse is a PTC resettable fuse with a resistance of 0.15 ohm. It is used for overcurrent protection in various applications. This surface mount thermistor has dual-ended terminals and operates at temperatures ranging from -40 to 85 °C.
1812L075/33DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Package Style (Meter): SMT;
1812L125/16DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .05 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Terminal Finish: MATTE TIN;
1812L010DR
1812L010DR by Littelfuse is a PTC resettable fuse with resistance of 1.6 ohm, suitable for overcurrent protection applications. It features dual-ended terminals in a rectangular SMT package, with matte tin finish and max operating temperature of 85°C. Ideal for circuit protection with a max DC voltage of 30V.
1812L075PR
1812L075PR by Littelfuse is a PTC resettable fuse with resistance of 0.1 ohm. It features dual-ended terminals and is used for overcurrent protection in SMT applications. With a rectangular package measuring 4.73mm x 3.41mm x 0.75mm, it operates b/w -40°C to 85°C and has a max circuit DC voltage of 13.2V.
1812L050/60MR
1812L050/60MR by Littelfuse is a PTC resettable fuse with a max operating temperature of 85°C and operating voltage of 60V. It is designed for overcurrent protection applications, featuring dual-ended terminals and surface mounting type. The thermistor has a compact SMT package style, making it suitable for various electronic devices.
1812L075/24DR
1812L075/24DR by Littelfuse is a PTC resettable fuse with resistance of 0.11 ohm. It features dual-ended terminals, rectangular SMT package, and matte tin finish. Ideal for overcurrent protection applications, it has an operating temperature range from -40 to 85°C and meets CUL, TUV, and UL standards.
1812L035/30DR
1812L035/30DR by Littelfuse is a PTC resettable fuse with resistance of 0.4 ohm. It features dual-ended terminals in a rectangular SMT package. Primarily used for overcurrent protection, it has a max operating temperature of 85°C and can handle up to 30V DC circuits.
1812L150/12DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Terminal Shape: WRAPAROUND;
1812L200/12DR
1812L200/12DR by Littelfuse is a PTC resettable fuse with a resistance of 0.02 ohm. It is used for overcurrent protection in various applications. This surface mount thermistor has dual-ended terminals and operates within a temperature range of -40 to 85 °C.
1812L020PR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .8 ohm; Maximum Operating Temperature: 85 Cel; Length (Package): 4.73 mm; Width (Package): 3.41 mm;
1812L050PR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Terminal Finish: MATTE TIN;
1812L050PRT
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .1 ohm; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE; Terminal Finish: Matte Tin (Sn);
1812L014DR
1812L014DR by Littelfuse is a PTC resettable fuse with resistance of 1.5 ohm, suitable for overcurrent protection applications. It features dual-ended terminals in a rectangular SMT package, with matte tin finish and max operating temperature of 85°C. Ideal for protecting circuits up to 60V DC, it is UL, TUV, and CUL certified.
1812L020/60DR
1812L020/60DR by Littelfuse is a PTC resettable fuse with resistance of 1.4 ohm, suitable for overcurrent protection applications. It features dual-ended terminals in a rectangular SMT package, with dimensions of 4.73mm x 3.41mm x 1.25mm and can operate b/w -40°C to 85°C, offering max circuit DC voltage of 60V.
1812L075PRT
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel;
1812L110/24DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved