Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schurter Ag's 3404.0009.11 fuse is a 7.4x3.1mm surface mount device with a rated current of 1A and very fast blow characteristic, suitable for electric circuit protection at up to 125V AC/DC. With dimensions of 7.4mm x 3.1mm x 2.6mm and a pre-arcing rating of 0.078 A2/s, it meets CUL and UL standards for various applications requiring reliable overcurrent protection in compact spaces at temperatures ranging from -40°C to +125°C.
Median Price
$0.816
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Master Electronics
1+ parts
$0.568
100+ parts
$0.516
1k+ parts
$0.482
10k+ parts
$0.405
Farnell
$0.758
$0.628
-
RS Americas
$0.820
$0.650
Element14
$0.829
$0.525
$0.494
Mouser Electronics
$1.180
$0.876
$0.669
$0.553
DigiKey
$1.500
$0.878
$0.671
$0.554
Verical
$0.813
$0.623
$0.519
TTI Europe
Arrow
$0.704
$0.573
$0.513
Nova Conductors
$0.455
Electro Sonic
$0.784
$0.713
$0.562
$0.498
VNN
Lantek
Odintec Ltd.
Rutronik
$42.200
Vyrian
Elcom Components
Electronic Expediters
LIBRA Elektronik GmbH
IBS Electronics
$1.137
$1.087
$1.044
Argo Parts USA
$0.441
Semicontronic
$0.610
$0.595
$0.592
Continental Prestige Electronics
$0.793
$0.448
$0.394
GreenTree Electronics
Netroflash
$0.446
$0.432
$0.423
Speed Components Ltd (Excess)
Perfect Parts
This fuse has a low joule integral, making it suitable for protecting electronic devices from power surges without causing damage itself.
Suitable for use in standard household electrical systems which typically operate at 120V.
Compact size allows for easy installation in a variety of devices and equipment.
Can safely handle up to 1 amp of current, making it suitable for low power applications.
With a very fast blow characteristic, this fuse provides quick protection to prevent damage to connected equipment.
Can operate in a wide range of temperatures, making it suitable for use in different environments.
Designed for surface mounting, providing easy and secure installation on circuit boards.
Fuses 3404.0009.11 attributes and parameters. Explore more Fuses devices from Schurter Ag
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Minimum Pre Arcing Time:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
3404.0009.11 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
The SCHURTER Group is the world's leading Swiss technology company ensuring a clean and safe supply of power, ease of use, and sophisticated overall solutions. As a leading innovator, SCHURTER manufactures and distributes components for circuit protection, as well as connectors, switches, and EMC products. In close cooperation with the customers, input systems are developed and manufactured. SCHURTER also offers services for the electronics industry in the field of the printed circuit board assembly. The business unit Solutions coordinates complete solutions from project planning to the manufacture of end products. 20 companies in 17 countries belong to the SCHURTER Group, 14 companies of which have their own production sites. This ensures that all major markets can be served by their own companies. They are coordinated from three hubs: SCHURTER AG in Lucerne for Europe, SCHURTER Inc. in Santa Rosa for America as well as SCHURTER (S) Pte. Ltd. in Singapore for Asia. In addition, SCHURTER has representatives in about 60 countries and works together with over 200 distributors. This close-knit network guarantees that SCHURTER products are securely and quickly available internationally.
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
0AKK-K100-BB
Bel Fuse
The Bel Fuse 0AKK-K100-BB is a fast blow electric fuse with a rated current of 100 A and a max operating temperature of 125°C. It has a nominal joule integral of 1560 J and is commonly used for circuit protection in applications requiring high breaking capacity and DC voltage up to 1000 V.
LPJ-10SP
Eaton Corporation
Eaton Corporation's LPJ-10SP fuse, rated at 10A and 600V AC/DC, features a J class with time delay blow characteristic. With dimensions of 20.6mm x 57.2mm, it offers circuit protection with a high breaking capacity of 300kA. Ideal for inline mounting applications, it complies with CE, CSA, and UL standards.
SF-1206F250-2
Bourns
Bourns SF-1206F250-2 fuse, rated 2.5A with 50A breaking capacity, features fast blow characteristic and UL reference standard. With dimensions of 3.1mm x 1.55mm x 0.6mm, it is ideal for electric circuit protection in applications requiring surface mount fuses with a trip delay of 60s at -20 to +105°C temperature range.
0685T5000-01
Bel Fuse 0685T5000-01 is a 1206 size fuse with 5A current rating and 63V DC voltage. It has a slow blow characteristic, rated breaking capacity of 50A, and trip time of 0.002s. Ideal for circuit protection in automotive applications due to AEC-Q200 compliance and surface mounting feature.
LP-CC-30
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 30 A; Terminal Shape: END CAP;
TCF70
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE;
0242.250UR
Littelfuse
Littelfuse 0242.250UR fuse: Rated 0.25A, 250V with trip time of 14400s. Surface mountable for circuit protection in UL standard applications at -40 to 125°C temperature range.
213.5
213.5 fuse by Littelfuse is a time lag electric fuse with a rated current of 0.5A and rated AC voltage of 250V. With dimensions of 5.2mm x 20mm, it has a nominal joule integral of 2.9J and can operate b/w -55°C to 125°C. This fuse is commonly used for circuit protection in various applications due to its high breaking capacity of 100A and compliance with standards such as CCC, CE, CSA, IEC, SEMKO, and UL.
0215020.MXP
0215020.MXP by Littelfuse is a 20 A fuse with 2600 J nominal joule integral and 0.01s trip time. Ideal for circuit protection in applications requiring a 250 V rated AC/DC voltage, such as inline mounting in electronic devices.
JTD125ID
JTD125ID fuse by Littelfuse is a time delay electric fuse with 125A rated current and 600V AC/500V DC voltage. It has a compact body size of 41.3mm x 76.2mm, suitable for inline mounting applications. With a high breaking capacity of 200kA, it is ideal for circuit protection in various industrial settings.
JJS-60
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 60 A; Terminal Shape: END CAP; Body Length/Diameter: 20.57 mm;
ATM-30LP
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 10.9 mm;
ATDR30
Mersen S A
The Mersen S A ATDR30 fuse is a 30A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm, body height of 38.1mm, and blow characteristic suitable for inline/holder mounting applications. This CSA and UL standard compliant fuse offers circuit protection with a high breaking capacity of 200kA.
FRS-R-100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
0458010.DR
Littelfuse 0458010.DR is a NANO fuse with 10A rated current, 63V DC voltage, and 15J nominal joule integral. Ideal for circuit protection in applications requiring a surface mount nano-sized fuse with a trip time of 5 seconds. Operating temperature range from -55°C to 125°C makes it suitable for various electronic devices.
AGU-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 40 A; Terminal Shape: END CAP; Packing Method: BOX;
ATDR2-1/2
ATDR2-1/2 by Mersen S A is a 600V, 2.5A time delay fuse with 200kA breaking capacity. It has a body size of 10.4mm x 38.1mm and end cap terminals, suitable for electric circuit protection in various applications requiring inline mounting or holder setups according to CSA and UL standards.
ATM-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Dimensions: 10.92mm x 3.81mm x 8.81mm;
0287005.PXCN
Littelfuse 0287005.PXCN fuse has a rated current of 5A and trip time of 0.08s, suitable for electric circuit protection. With a nominal joule integral of 26J, it offers high breaking capacity at 1000A. Its compact dimensions (19.1mm x 5.1mm x 12.3mm) make it ideal for inline mounting applications in various industries.
0313025.HXP
Littelfuse 0313025.HXP fuse, rated 25A and 32V, features time lag blow characteristic. With dimensions of 6.35mm x 31.75mm, it's ideal for electric circuit protection in applications requiring a rated breaking capacity of 300A and pre-arcing rating of 16500 A2/s.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3404.2418.11
Schurter Ag
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 1.6 A; Terminal Shape: WRAPAROUND;
3404.2409.11
The Schurter Ag 3404.2409.11 fuse has a rated current of 0.2A and a rated breaking capacity of 200A, suitable for circuit protection in applications requiring a time lag blow characteristic. With dimensions of 4.2x11.1mm and terminal shape WRAPAROUND, it is designed for surface mounting with gold (Au) terminal finish.
3404.0116.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
3404.2416.11
3404.2416.11 fuse by Schurter Ag has a rated current of 1A and nominal joule integral of 2.8J, suitable for electric circuit protection at up to 250V AC. With a time lag blow characteristic and gold terminal finish, it offers reliable performance in surface mount applications with dimensions of 4.2x11.1mm.
3404.0017.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND;
3404.2422.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND;
3404.2415.11
3404.2415.11 fuse by Schurter Ag is a TIME LAG type with 0.8A rated current and 1.4J nominal joule integral, suitable for ELECTRIC FUSE circuit protection in applications up to 250V AC/125V DC. Its compact size of 4.2x11.1mm makes it ideal for SURFACE MOUNT installations with gold terminal finish and WRAPAROUND shape.
3404.0004.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: .1 A; Terminal Shape: WRAPAROUND;
3404.2413.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND;
3404.0010.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND;
3404.0010.22
3404.0016.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND;
3404.0114.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND;
3404.0021.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: 10 A; Terminal Shape: WRAPAROUND;
3404.0112.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND;
3404.2464.22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: .63 A; Terminal Shape: WRAPAROUND;
3404.2465.11
3404.2465.11 fuse by Schurter Ag is a 4.2x11.3mm electric fuse with 0.8A rated current and 250V AC voltage, suitable for circuit protection in various applications. With a very fast blow characteristic and high breaking capacity of 200A, it operates b/w -40°C to 85°C temperatures, meeting CUL, VDE, and UL standards for reliable performance in diverse environments.
3404.0005.22
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: .16 A; Terminal Shape: WRAPAROUND;
3404.0008.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 125 V; Rated Current: .63 A; Terminal Shape: WRAPAROUND;
3404.0008.22
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved