Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schurter Ag's 3-103-712 is a SINGLE PHASE EMI FILTER with 240V rated voltage, CSA, EN, IEC, UL approvals. It operates at -40 to 100°C and has a max leakage current of 0.5mA. Ideal for PANEL MOUNT applications with 12A rated current.
Median Price
$25.430
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Farnell
1+ parts
$19.600
100+ parts
$15.940
1k+ parts
-
10k+ parts
Bürklin Elektronik
Element14
$39.500
$31.450
Chip1Stop
Nova Conductors
$24.550
VNN
Vyrian
Rapid Electronics
Continental Prestige Electronics
$15.560
AZTECH Wire
$16.620
$15.960
$15.640
$15.330
Aranea Global
$24.059
$23.097
Argo Parts USA
Having multiple approvals indicates that this product meets international safety standards and regulations, making it reliable and trustworthy.
Suitable for use in a wide range of applications that require a 240V input.
Designed specifically to reduce electromagnetic interference in single phase systems, ensuring clean power supply.
Can withstand high temperatures without performance degradation, making it suitable for industrial environments.
Capable of operating in extremely cold conditions, ideal for outdoor or refrigerated applications.
Compact size allows for easy integration into existing systems with limited space.
Compatible with standard power frequencies, ensuring universal compatibility.
Optimal size for a balance between performance and space efficiency.
Low leakage current ensures safety and compliance with regulations, preventing electric shocks.
Easy to install on panels or enclosures, simplifying the setup process.
Can handle high current loads without overheating, suitable for demanding applications.
Optimal height for easy installation and compatibility with standard equipment.
EMI Mains Filters 3-103-712 attributes and parameters. Explore more EMI Mains Filters devices from Schurter Ag
Approvals (V):
Filter Type:
Height:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Width (mm):
The SCHURTER Group is the world's leading Swiss technology company ensuring a clean and safe supply of power, ease of use, and sophisticated overall solutions. As a leading innovator, SCHURTER manufactures and distributes components for circuit protection, as well as connectors, switches, and EMC products. In close cooperation with the customers, input systems are developed and manufactured. SCHURTER also offers services for the electronics industry in the field of the printed circuit board assembly. The business unit Solutions coordinates complete solutions from project planning to the manufacture of end products. 20 companies in 17 countries belong to the SCHURTER Group, 14 companies of which have their own production sites. This ensures that all major markets can be served by their own companies. They are coordinated from three hubs: SCHURTER AG in Lucerne for Europe, SCHURTER Inc. in Santa Rosa for America as well as SCHURTER (S) Pte. Ltd. in Singapore for Asia. In addition, SCHURTER has representatives in about 60 countries and works together with over 200 distributors. This close-knit network guarantees that SCHURTER products are securely and quickly available internationally.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
1552200168
Molex
WIRE AND CABLE;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS303C
Idec
ROTARY SWITCH;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
RC0603FR-0710KL
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
SSHB10HS-R11100
KEMET Corporation
KEMET Corporation's SSHB10HS-R11100 is a UL-approved EMI mains filter with 250V rated voltage and 1.1A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a high pot of 500V. Ideal for single-phase applications, this filter is compact at 17mm width, 22mm length, and 15.5mm height for through-hole mounting in various electronic devices.
FN2010M-20-06
Schaffner Holding Ag
FN2010M-20-06 by Schaffner Holding Ag is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 100°C. It has approvals from EN, IEC, CSA, and UL. This panel mount filter is suitable for applications requiring up to 20A of rated current and operates at an operating frequency of 400Hz.
SSR21NH-M30064
KEMET Corporation's SSR21NH-M30064 is a UL approved EMI mains filter with 250V rated voltage and 3A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of L23.0xB23.0xH14.5 mm. Ideal for applications requiring single-phase EMI filtering in through-hole mounting setups.
SSR21NH-031810
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Length: 23 mm; Width (mm): 23; Rated Voltage: 250 V; Height: 14.5 mm;
RN112-0.5-02-15M
RN112-0.5-02-15M by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and current of 0.5A. Operating at temperatures from -40°C to 100°C, it has dimensions of L17.7xB17.1xH12.6mm and is ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
SU9VF-02100
KEMET Corporation's SU9VF-02100 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.2A rated current. With a temperature range of -25 to 120°C, it is ideal for EMI mains filtering applications. This filter, measuring 11mm in width and 17mm in length and height, can be mounted through hole.
1000APS12P
TE Connectivity
TE Connectivity's 1000APS12P is a UL-approved EMI mains filter with a rated voltage of 690V. This three-phase filter has a max operating temperature of 50°C and rated current of 1000A. Ideal for panel mounting, it ensures efficient filtering in industrial applications.
UU9LFBNP-B-B163
Sumida
Sumida UU9LFBNP-B-B163 is a SINGLE PHASE EMI FILTER with 4 terminals, rated at 0.16A. Its compact size of L16.5xB11.0xH16.5 (mm) makes it ideal for through-hole mounting applications requiring effective EMI mains filtering in limited space environments.
SC-08-E075J
KEMET Corporation's SC-08-E075J is a UL approved EMI mains filter with 250V rated voltage and 8A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a high pot rating of 500V. Ideal for single-phase applications, this filter is mounted through hole and measures 16mm in width by 25mm in length at a height of 25.5mm.
RTEN-5030
Tdk-lambda
THREE PHASE EMI FILTER; Rated Current: 30 A; Dimensions: L140.0XB70.0XH42.0 (mm)/L5.512XB2.756XH1.654 (inch); Minimum Insulation Resistance: 100 Mohm; Length: 140 mm; Mounting Type: PANEL MOUNT;
SSR21NV-M20125
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Height: 27 mm; Width (mm): 16; Minimum Insulation Resistance: 100 Mohm;
SCF20-05-550
KEMET Corporation's SCF20-05-550 is a single-phase EMI mains filter with 4 terminals, rated for 250V and 5A. Operating b/w -25°C to 70°C, it has dimensions of L25.0xB15.5xH25.0 mm and is designed for through-hole mounting applications at 50Hz frequency. Ideal for noise suppression in electronic equipment requiring EMI filtering in compact spaces.
RTEN-2020
TDK
RTEN-2020 by TDK is a THREE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It offers approvals from UL, EN, and ENEC-14 for various applications. With a wide operating temperature range (-25 to 85 °C) and compact dimensions (140x70x42 mm), it is ideal for panel mount installations in industrial settings.
RTEN-5030D
TDK's RTEN-5030D is a 3-phase EMI filter with 30A rated current and 500V voltage. It offers approvals from UL and EN, operates b/w -25°C to 85°C, and has a high pot of 2500V. Ideal for panel mounting applications requiring effective mains filtering in industrial settings.
SCF29XV-250-2R2A008JH
SINGLE PHASE EMI FILTER;
SCR22-060-1R0A075JH
KEMET's SCR22-060-1R0A075JH is a UL-approved EMI mains filter with 250V rated voltage and 6A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and is a single-phase filter. Ideal for through-hole mounting applications in various industries.
FN351H-50-33
Schaffner Holding Ag's FN351H-50-33 is a 3-phase EMI filter with approvals from CSA and ENEC-14. It has a rated voltage of 520V, rated current of 57.7A, and operates at temperatures ranging from -25°C to 100°C. This panel mount filter is designed for applications requiring effective electromagnetic interference suppression in industrial settings.
SC-06-10JS
KEMET Corporation's SC-06-10JS is a UL approved SINGLE PHASE EMI FILTER with 250V rated voltage and 6A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 105°C, and measures 26mm x 29mm x 12mm. Ideal for EMI mains filtering applications with through hole mounting.
SINGLE PHASE EMI FILTER; Rated Current: 5 A; No. of Terminals: 4; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50Hz; Width (mm): 15.5;
SSRH7HS-M15036
KEMET Corporation's SSRH7HS-M15036 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 1.5A. This single-phase filter operates b/w -25°C to 120°C, making it ideal for UL-approved applications requiring effective electromagnetic interference suppression.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3-103-675
Schurter Ag
The Schurter Ag 3-103-675 EMI Mains Filter is a single-phase filter with approvals from CSA, EN, IEC, and UL. It has a rated voltage of 250V, rated current of 6A, and max operating temperature of 100°C. Ideal for panel mounting applications in various industries requiring effective EMI filtering at frequencies of 50/60Hz.
3-103-676
Schurter Ag's 3-103-676 EMI Mains Filter is a single-phase filter with approvals from CSA, EN, IEC, and UL. It has a rated voltage of 250V, rated current of 10A, and max operating temperature of 100°C. Ideal for panel mounting applications requiring effective filtering at frequencies of 50/60Hz.
3-103-678
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Mounting Type: PANEL MOUNT; Length: 85 mm; Maximum Operating Temperature: 100 Cel; Maximum Leakage Current: .5 mA;
3-103-705
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Minimum Operating Temperature: -40 Cel; Operating Frequency (Hz): 50/60Hz; Length: 85 mm; Rated Voltage: 250 V;
3-103-706
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Maximum Leakage Current: .5 mA; Width (mm): 25; Approvals (V): CSA; EN; IEC; UL; Height: 89.5 mm;
3-103-708
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Maximum Leakage Current: .5 mA; Rated Voltage: 250 V; Approvals (V): CSA; EN; IEC; UL; Mounting Type: PANEL MOUNT;
3-103-709
Schurter Ag's 3-103-709 EMI Mains Filter is a single-phase filter with 240V rated voltage and 3A current. With approvals from CSA, EN, IEC, and UL, it operates b/w -40°C to 100°C. Ideal for panel mounting applications due to its compact size of 25mm x 85mm x 89.5mm.
3-103-715
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Maximum Operating Temperature: 100 Cel; Mounting Type: PANEL MOUNT; Operating Frequency (Hz): 50/60Hz; Length: 104 mm;
3-103-982
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Maximum Operating Temperature: 100 Cel; Approvals (V): CSA; EN; IEC; UL; Minimum Operating Temperature: -40 Cel; Height: 82.6 mm;
3-103-983
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 82.6 mm; Rated Voltage: 250 V; Length: 104 mm; Mounting Type: PANEL MOUNT;
3-103-985
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Maximum Operating Temperature: 100 Cel; Maximum Leakage Current: .005 mA; Approvals (V): CSA; EN; IEC; UL; Minimum Operating Temperature: -40 Cel;
3-103-700
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Height: 89.5 mm; Mounting Type: PANEL MOUNT; Approvals (V): CSA; EN; IEC; UL; Maximum Operating Temperature: 100 Cel;
3-103-704
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Operating Frequency (Hz): 50/60Hz; Width (mm): 25; Minimum Operating Temperature: -40 Cel; Length: 85 mm;
3-103-707
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Maximum Operating Temperature: 100 Cel; Maximum Leakage Current: .5 mA; Width (mm): 25; Approvals (V): CSA; EN; IEC; UL;
3-103-711
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Width (mm): 25; Mounting Type: PANEL MOUNT;
3-103-719
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Maximum Operating Temperature: 100 Cel; Width (mm): 25; Length: 104 mm; Height: 82.6 mm;
3-103-736
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Minimum Operating Temperature: -40 Cel; Mounting Type: PANEL MOUNT; Length: 104 mm; Maximum Operating Temperature: 100 Cel;
3-103-738
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Height: 82.6 mm; Maximum Leakage Current: .5 mA; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -40 Cel;
3-103-753
SINGLE PHASE EMI FILTER; Rated Current: 12 A; Maximum Leakage Current: .5 mA; Width (mm): 25; Operating Frequency (Hz): 50/60Hz; Height: 82.6 mm;
3-103-754
SINGLE PHASE EMI FILTER; Rated Current: 15 A; Height: 82.6 mm; Maximum Operating Temperature: 100 Cel; Rated Voltage: 240 V; Maximum Leakage Current: .5 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved