Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec USB-A-S-F-B-SM2-TR is a telecom/datacom connector with 4 gold flash contacts. Features include polybutylene terephthalate insulator, tin lead termination finish, and right angle mounting style. Ideal for applications requiring surface mount USB connectors in electronic devices.
Median Price
$1.973
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.490
100+ parts
$1.330
1k+ parts
$1.040
10k+ parts
$0.708
DigiKey
$2.100
$1.519
-
Samtec
$2.110
$0.890
$0.490
Sager
$2.200
$1.380
$0.926
$0.842
Powell Electronics
$0.930
Verical
$1.325
Master Electronics
$1.323
$0.862
$0.709
RS (Exports)
$1.846
$1.692
Electro Sonic
$2.173
$1.370
$0.917
$0.505
IBS Electronics
$2.207
$1.303
$1.196
Nova Conductors
Argo Parts USA
Authorized Procurement Solutions
Continental Prestige Electronics
Aranea Global
Kepictronics
GreenTree Electronics
Tin lead termination contact finish provides a reliable and durable connection, ensuring optimal performance.
Polybutylene terephthalate insulator material offers excellent electrical insulation properties and heat resistance, making the connector suitable for demanding applications.
Front tin and rear nickel shell finish provides corrosion resistance and enhances the overall durability of the connector.
USB connector type ensures compatibility with a wide range of devices and allows for easy plug-and-play connectivity.
UL 94V-0 flammability rating indicates that the connector meets stringent safety standards and can be used in fire-prone environments with confidence.
Gold flash mating contact finish ensures low contact resistance, reliability, and longevity of the connector.
Having 4 contacts allows for multiple connections or data transfer channels, making the connector versatile and suitable for various applications.
Board mounting type offers stable and secure attachment to circuit boards, ensuring a stable electrical connection in electronic devices.
Phosphor bronze shell material provides good conductivity and mechanical strength, making the connector robust and reliable.
Surface mount termination type simplifies the assembly process and allows for efficient soldering onto the circuit board, saving time and effort.
Female contact gender ensures proper mating with male connectors, reducing the risk of mismatches and ensuring a secure connection.
Right-angle mounting style offers flexibility in installation and allows for space-saving in cramped electronic devices.
Telecom & Datacom Connectors USB-A-S-F-B-SM2-TR attributes and parameters. Explore more Telecom & Datacom Connectors devices from Samtec
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
USB-A-S-F-B-SM2-TR Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
EU2B-YS3203F
Idec
ROTARY SWITCH;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
87824-0015
Molex 87824-0015 is a Telecom & Datacom Connector with 29 contacts, TIN finish, and glass-filled LCP insulator. It's a female receptacle connector for surface mount applications on boards.
2013595-1
TE Connectivity
TE Connectivity's 2013595-1 is a Telecom & Datacom Connector with EMI shielding and UL 94V-0 flammability rating. Featuring polarized design, it has 8 contacts, copper alloy shell, and polyethylene insulator. Ideal for telecom applications with operating temperatures from -40 to 85°C.
1546413-3
TE Connectivity 1546413-3 is a Telecom & Datacom Connector with EMI shielding, ABS insulator, and 30u plating. It has 8 contacts, rated for 1.5A signal current, suitable for panel mounting in applications requiring reliable data transmission at temperatures ranging from -20 to 80°C.
47018-2001
Molex 47018-2001 is a Telecom & Datacom Connector with 22 contacts, 0.05" pitch, and 1.592" body length. It has an insulation resistance of 1Gohm and operates b/w -35°C to 85°C. Ideal for commercial applications requiring a reliable right-angle board mount connector with surface mount termination option.
RJHSE-5384-04
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; PCB Contact Pattern: STAGGERED;
292304-5
TE Connectivity's 292304-5 USB connector features gold termination, polyethylene insulator, and phosphor bronze contacts. With a rated current of 1A, it is ideal for telecom applications requiring high durability and reliability in commercial settings. The connector has a right-angle mounting style with solder termination and operates within a temperature range of -55 to 85°C.
5-2301996-1
TE Connectivity 5-2301996-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and supports board mounting. Ideal for applications requiring high-speed data transmission in telecommunications and data communication systems.
48409-0003
Molex 48409-0003 USB connector with gold nickel finish, glass-filled polyethylene insulator, and solderable retention clips. Ideal for telecom & datacom applications due to its 2+2 rows loaded design, straight board mounting option, and durability of 5000 cycles. Rated for commercial reliability with a signal current of 1.8A and operating temperatures from -20°C to 85°C.
1-1546405-1
TE Connectivity 1-1546405-1 is a Telecom & Datacom Connector with ABS insulator, 8 contacts, and 2 PCB rows. It operates b/w -20°C to 80°C, rated at 1.5A for signal current. Ideal for telecom applications requiring polarized housing and solder termination on panel mounting.
67298-3090
The Molex 67298-3090 USB connector features a body size of 0.547" x 0.614" x 0.681", with glass-filled PBT insulator and tin plating. It has 8 contacts, right-angle mounting, solder termination, and is suitable for telecom/datacom applications. The connector is UL94V-0 rated, with a stainless steel shell and locking mounting option.
1734035-1
Tyco Electronics Amp
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Empty Shell: NO; DIN Conformance: NO;
RJMG2012211A0FR
RJMG2012211A0FR by Amphenol is a Telecom & Datacom Connector with 0.79" body length, 0.507" width, and 0.95" depth. Featuring Pure Tin termination finish, POLYETHYLENE insulator, and GOLD mating contact finish. Ideal for board and panel mounting in telecom and datacom applications due to its polarized housing and staggered PCB contact pattern.
54602-908LF
54602-908LF by Amphenol is a telecom & datacom connector with 0.602" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for board mounting in applications requiring a durable, right-angle female jack connector with solder termination and UL certification.
6339082-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 64; Additional Features: 8 PORTS 8 POSITION EACH; Contact Material: PHOSPHOR BRONZE;
53462-0629
53462-0629 by Molex is a Telecom & Datacom Connector with 0.531" body length, 100M ohm insulation resistance, and 125VAC dielectric voltage. Ideal for board mounting in telecom/datacom applications due to its matte tin finish, glass-filled polyamide insulator, and right-angle mounting style.
USB3075-30-A
Global Connector Technology
USB3075-30-A by Global Connector Technology is a USB connector with 5 contacts, rated for 1A signal current. It features gold over nickel termination finish, liquid crystal polymer insulator material, and stainless steel shell. Ideal for telecom/datacom applications, it has a dielectric voltage of 500VAC and operates b/w -30°C to 85°C.
RJHSE-3081
Amphenol
RJHSE-3081 by Amphenol is a Telecom & Datacom Connector with POLYETHYLENE insulator. Featuring 8 contacts, it has a 94V-0 UL Flammability Code and FEMALE contact gender. Ideal for BOARD mounting, this TELECOM AND DATACOM CONNECTOR is commonly used in applications requiring STRAIGHT mounting style and TELCOM, MODULAR contact style.
1-2295018-2
TE Connectivity 1-2295018-2 USB Connector has 24 contacts, rated at 5A for signal current. With a durable stainless steel shell and polyethylene insulator, it operates b/w -30 to 85°C. Ideal for telecom/datacom applications with surface mount termination and nickel finish.
GSB3211311WEU
GSB3211311WEU by Amphenol is a USB connector with 9 contacts, featuring matte tin termination finish. It has a body length of 0.472", width of 0.507", and depth of 0.722". Ideal for telecom/datacom applications, it offers high insulation resistance (100M ohm) and operates b/w -55°C to 85°C.
GSB343133HR
GSB343133HR by Amphenol is a USB connector with 10 contacts, gold over nickel finish, and liquid crystal polymer insulator. Ideal for telecom/datacom applications, it features female contact gender, surface mount termination, and stainless steel shell material in a right-angle receptacle design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
USB-A-S-RA-TSMT
Adam Tech
USB-A-S-RA-TSMT by Adam Tech is a telecom/datacom connector with 4 contacts, rated at 1A signal current. It features right-angle mounting, surface mount termination, and a polarization key for easy connection. Ideal for commercial applications requiring a reliable USB connector with gold over nickel mating contact finish.
USB-AM-S-F-B-TH-R
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Finish: NICKEL; DIN Conformance: NO; Filter Feature: NO;
USB-A-S-RA-TSMT-T/R
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Insulation Resistance: 1000000000 ohm;
USB-A-S-RA-TSMT-NP
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Mounting Option-1: LOCKING;
USB-A-S-VT
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE;
Multicomp Pro
USB CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 30VAC; No. of Connectors: ONE; Total No. of Contacts: 4; Rated Current - Signal: 1 A;
USB-A1HSW6
On Shore Technology
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Reference Standard: UL; Contact Resistance: 30 mohm;
USB-A-S-VT-WT
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
USB-A-S-VT-HT
USB-A-S-VTA
USB-AM-S-F-B-TH
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Shell Material: COPPER ALLOY;
USB-A-S-RA
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Termination Contact Finish: Tin (Sn);
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NICKEL; Termination Type: SOLDER; Total No. of Contacts: 4;
USB-AP-S-RA-SMT
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Mating Contact Finish: AU ON NI;
USB-A-S-S-B-TH
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
USB-A-S-S-B-TH-R
Samtec's USB-A-S-S-B-TH-R is a right angle USB connector with 4 contacts, matte tin finish, and polybutylene terephthalate insulator. It has a durability of 1500 cycles and operates b/w -50 to 85°C. Ideal for telecom/datacom applications, it features a nickel shell finish and brass shell material for reliability in commercial settings.
USB-A-S-F-W-TH
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-1: LOCKING;
USB-A-D-S-W-TH
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: TIN;
USB-A-D-F-B-TH-R
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Filter Feature: NO; Empty Shell: NO;
USB-A-S-F-B-SM2
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; No. of PCB Rows: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved