Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
USB-A-S-RA by Multicomp Pro is a USB connector with 4 contacts, right-angle mounting style, and solder termination. It features nickel shell finish and polybutylene terephthalate insulator material. Ideal for telecom & datacom applications requiring female contact gender and board mounting type.
Median Price
$0.354
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Arrow
1+ parts
$0.341
100+ parts
$0.281
1k+ parts
$0.240
10k+ parts
-
Mouser Electronics
$0.480
$0.348
$0.289
$0.268
DigiKey
$0.510
$0.365
$0.311
$0.291
Element14
$1.050
$0.769
$0.568
Newark
$1.130
$0.718
$0.660
Future Electronics
$0.235
$0.220
Verical
$0.319
Heilind Electronics
$0.372
$0.302
Master Electronics
$0.340
$0.231
$0.214
Powell Electronics
$0.280
Interstate Connecting
$0.379
$0.324
$0.252
Chip1Stop
Farnell
$0.339
Nova Conductors
$0.284
TME
$0.471
$0.322
$0.265
IBS Electronics
$0.358
$0.344
$0.323
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
NAC Semi
$0.464
Vyrian
Rutronik
$0.316
$0.305
Electro Sonic
$0.304
$0.236
$0.209
Bristol Electronics
Speed Components Ltd
EMSNET
ComSIT Distribution GmbH
Argo Parts USA
$0.275
Continental Prestige Electronics
$0.560
Aztec Data Supply Inc.
$2.160
Authorized Procurement Solutions
EMSNET (Excess)
TIN finish provides excellent conductivity and corrosion resistance, ensuring reliable connections.
Polybutylene terephthalate is a durable and heat-resistant material, making the connector suitable for high temperature environments.
Nickel finish offers good durability and resistance to oxidation, enhancing the longevity of the connector.
USB connector is a widely used standard, ensuring compatibility with various devices and applications.
Phosphor bronze provides excellent electrical conductivity and durability, ensuring high performance in data transmission.
Having 4 contacts allows for multiple data connections, making the connector versatile and suitable for various applications.
Board mounting type enables secure and stable installation on circuit boards, ensuring reliable connectivity.
Using phosphor bronze for the shell material ensures durability and resistance to wear and tear, increasing the lifespan of the connector.
Solder termination provides a strong and permanent connection, enhancing the reliability of the connector.
Female contacts are typically more reliable for maintaining connection integrity, making this connector a dependable choice for data transmission.
Receptacle style allows for easy plugging and unplugging of devices, offering convenience and user-friendly design.
Right-angle mounting style saves space and provides flexibility in design layouts, making the connector suitable for compact devices.
Telecom & Datacom Connectors USB-A-S-RA attributes and parameters. Explore more Telecom & Datacom Connectors devices from Multicomp Pro
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
USB-A-S-RA Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Gulf Semiconductor
Vishay Telefunken
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Diodes Incorporated
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Solid State Devices
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
2012670005
Molex
Molex 2012670005 USB connector features POLYETHYLENE insulator, 24 contacts, and 105°C max operating temp. Ideal for telecom/datacom applications with BOARD MOUNTING FLANGE option and FEMALE contact gender. Designed for durability with STAINLESS STEEL shell material and rated at 5A signal current.
1734366-1
Tyco Electronics Amp
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Minimum Operating Temperature: -40 Cel; No. of Rows Loaded: 1;
471554001
Molex 471554001 is a Telecom & Datacom Connector with 0.05" pitch, gold termination finish, and 1.5A signal current rating. Ideal for board mounting applications in telecom and datacom systems, featuring glass-filled polyethylene insulator material and UL reference standard compliance.
440500003
Molex 440500003 is a telecom & datacom connector with dielectric voltage of 1000VAC. It features matte tin over nickel termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for board and panel mounting applications in telecommunications and data communication systems.
897-43-004-90-000000
Mill-max Mfg
897-43-004-90-000000 by Mill-max Mfg is a USB connector with 0.474" body length, 1000000000 ohm insulation resistance, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, it features matte tin over nickel termination finish and polyethylene insulator material.
5520258-3
TE Connectivity
TE Connectivity 5520258-3 is a Telecom & Datacom Connector with 0.635" body length, 0.655" width, and 0.65" depth. It has an insulation resistance of 500M ohm and uses POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for telecom applications, it features a split board lock mounting option and solder termination type.
7499010211A
Wuerth Elektronik & Kg
7499010211A by Wurth Elektronik is a Telecom & Datacom Connector with Filter Feature, Polyethylene Insulator, and Tin over Nickel Termination. It has 8 contacts, right angle mounting style, and solder termination type. Ideal for telecom and datacom applications requiring reliable connectivity in board-mounted configurations.
ZX62D-B-5P8(30)
Hirose Electric
The Hirose Electric ZX62D-B-5P8(30) USB connector has gold termination finish, 5 contacts, and rated current of 1.8A. With operating temperatures from -30 to 85°C, it is ideal for telecom & datacom applications requiring a male surface mount USB 2.0 connector with right angle mounting and locking option.
RJHSE-3381
Amphenol
RJHSE-3381 by Amphenol is a telecom & datacom connector with 8 contacts, made of copper alloy. It features matte tin termination finish, gold mating contact finish over nickel, and polarization key for polarized housing. Ideal for board and panel mounting in commercial applications with operating temperatures from -55°C to 85°C.
2-6339191-1
TE Connectivity 2-6339191-1 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and 500M ohm insulation resistance. Ideal for telecom applications, it features a right-angle jack body style and surface mount termination for durability in commercial settings.
472720024
Telecom and Datacom Connectors; Termination Contact Finish: MATTE TIN OVER NICKEL;
2169900003
TELECOM AND DATACOM CONNECTOR;
USB-RS485-WE-1800-BT
FTDI USB-RS485-WE-1800-BT features 85°C max and -40°C min operating temp, USB connector, CE/FCC/UL standards. Ideal for telecom/datacom connectors with male contact gender, one connector, cable mounting.
95503-2881
Molex 95503-2881 is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 0.594" body width. It features GLASS FILLED LCP insulator material and MATTE TIN over NICKEL termination contact finish. Ideal for telecom and datacom applications due to its durability, UL certification, and solder termination type.
1689064
Phoenix Contact
Phoenix Contact 1689064 is a Telecom & Datacom Connector with GOLD OVER NICKEL finish. Featuring 8 FEMALE contacts, it is a RIGHT ANGLE SOCKET type UL 94V-0 rated connector. Ideal for telecommunications and data communication applications.
10033526-N3212MLF
Amphenol Communications Solutions
Amphenol's 10033526-N3212MLF is a USB connector with matte tin finish, rated at 1A signal current. Featuring a dielectric voltage of 100VAC, it has a durability of 5000 cycles and insulation resistance of 100M ohm. Ideal for telecom/datacom applications, this right-angle receptacle offers reliable performance in commercial settings.
DX07S024JJ2R1300
Japan Aviation Electronics Industry
DX07S024JJ2R1300 by Japan Aviation Electronics Industry is a USB connector with 24 contacts. It features gold flash over nickel termination, palladium over nickel mating contact finish, and stainless steel shell material. Ideal for telecom & datacom applications requiring female right angle receptacle mounting on board using solder or surface mount termination.
ZX62R-AB-5P(30)
Hirose Electric's ZX62R-AB-5P(30) USB connector features gold termination, liquid crystal polymer insulator, and tin shell finish. With 5 contacts, it is ideal for telecom/datacom applications requiring a 94V-0 flammability code. The surface mount receptacle has a stainless steel shell and right-angle mounting style for board installation.
1734510-1
TE Connectivity's 1734510-1 USB connector features POLYBUTYLENE TEREPHTHALATE insulator, 100000000 ohm insulation resistance, and 29.92u TIN plating. Ideal for telecom applications, this right-angle receptacle has a rated current of 1A and operates b/w -40 to 85 °C temperatures.
UJ31-CH-3-MSMT-TR-67
Cui
Cui's UJ31-CH-3-MSMT-TR-67 USB connector features 24 contacts, POLYAMIDE46 insulator, and NICKEL shell finish. Ideal for telecom/datacom applications with a 100VAC dielectric voltage, -40 to 80°C operating range, and UL94V-0 flammability rating. Suitable for board mounting with a right-angle design and locking option for durability up to 10k cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
USB-A-S-RA-TSMT
Adam Tech
USB-A-S-RA-TSMT by Adam Tech is a telecom/datacom connector with 4 contacts, rated at 1A signal current. It features right-angle mounting, surface mount termination, and a polarization key for easy connection. Ideal for commercial applications requiring a reliable USB connector with gold over nickel mating contact finish.
USB-AM-S-F-B-TH-R
Samtec
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Finish: NICKEL; DIN Conformance: NO; Filter Feature: NO;
USB-A-S-RA-TSMT-T/R
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Insulation Resistance: 1000000000 ohm;
USB-A-S-RA-TSMT-NP
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Mounting Option-1: LOCKING;
USB-A-S-VT
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE;
Multicomp Pro
USB CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 30VAC; No. of Connectors: ONE; Total No. of Contacts: 4; Rated Current - Signal: 1 A;
USB-A1HSW6
On Shore Technology
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Reference Standard: UL; Contact Resistance: 30 mohm;
USB-A-S-VT-WT
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
USB-A-S-VT-HT
USB-A-S-VTA
USB-AM-S-F-B-TH
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Shell Material: COPPER ALLOY;
USB-A-S-RA
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Termination Contact Finish: Tin (Sn);
USB-AP-S-RA-SMT
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Mating Contact Finish: AU ON NI;
USB-A-S-S-B-TH
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
USB-A-S-S-B-TH-R
Samtec's USB-A-S-S-B-TH-R is a right angle USB connector with 4 contacts, matte tin finish, and polybutylene terephthalate insulator. It has a durability of 1500 cycles and operates b/w -50 to 85°C. Ideal for telecom/datacom applications, it features a nickel shell finish and brass shell material for reliability in commercial settings.
USB-A-S-F-W-TH
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-1: LOCKING;
USB-A-D-S-W-TH
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: TIN;
USB-A-S-F-B-SM2-TR
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD FLASH; DIN Conformance: NO; IEC Conformity: NO;
USB-A-D-F-B-TH-R
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Filter Feature: NO; Empty Shell: NO;
USB-A-S-S-W-VU-RC
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved