Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TW-06-03-F-S-200-110 by Samtec is a board stacking connector with 6 contacts, featuring a mating contact pitch of 0.079", termination finish in Tin (Sn) with Nickel (Ni) barrier, and rated current of 5.2A. Ideal for applications requiring a reliable male connector with straight mounting style and solder termination, operating within -55 to 125°C temperature range.
Median Price
$1.210
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.770
1k+ parts
$0.550
10k+ parts
$0.250
Vyrian
-
Nova Conductors
AZTECH Wire
$15.450
Netroflash
The close contact pitch allows for a secure and reliable connection between the devices, reducing the risk of disconnection or signal interference.
The compact body length helps in saving space on the circuit board and makes the overall design more compact and efficient.
The tin finish with nickel barrier provides excellent corrosion resistance and ensures long-term durability of the connectors.
Liquid crystal polymer is known for its high thermal stability and excellent electrical properties, ensuring reliable performance even under extreme conditions.
The high operating temperature allows for the connectors to be used in a wide range of environments without the risk of overheating or malfunction.
The flash plating provides a thin but effective layer of protection and ensures good conductivity for smooth signal transmission.
Phosphor bronze is known for its excellent electrical conductivity and durability, making it a reliable choice for maintaining signal integrity.
The UL 94V-0 flammability rating indicates that the connectors are flame-retardant, adding an extra layer of safety in case of fire hazards.
Headers & Edge Type Connectors TW-06-03-F-S-200-110 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
Filter Feature:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
TW-06-03-F-S-200-110 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Fairchild Semiconductor
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bourns
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Sensitron Semiconductor
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
Renesas Electronics
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
22-05-2071
Molex
Molex 22-05-2071 is a board connector with 7 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring durable connectors with a mounting style of right angle and solder termination type.
B4P-VH(LF)(SN)
J S T Mfg
B4P-VH(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.156" pitch, 1500VAC voltage withstand, and 10A signal current rating. Ideal for PCB applications requiring POLARIZED HOUSING, it features BRASS contacts with TIN finish and WHITE insulator color.
02T-JWPF-VSLE-S
BOARD CONNECTOR; DIN Conformance: NO; Contact Material: NOT SPECIFIED; MIL Conformity: NO; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
803-93-010-20-001000
Mill-max Mfg
Mill-max Mfg 803-93-010-20-001000 is a 10-contact, dual-row board connector with tin/lead finish. Featuring beryllium copper contacts on a right-angle socket, it's ideal for PCB mounting applications with 2.54mm terminal pitch and solder termination.
XF2M-3015-1A-R100
Omron
Omron XF2M-3015-1A-R100 is a FFC/FPC connector with 30 contacts, rated at 0.5A signal current. It features gold (Au) - nickel (Ni) finish, 0.020" pitch, and liquid crystal polymer insulator. Suitable for board mounting applications with durability of 20 cycles and operating temperature range from -30 to 85°C.
22-05-3021
Molex 22-05-3021 is a board connector with 2 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.2"x0.25"x0.442". It uses matte tin/copper termination finish, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right-angle mounting style with solder termination.
52746-1071
Molex 52746-1071 FFC/FPC connector with 10 contacts, gold finish, and white insulator. Suitable for board mounting with a mating pitch of 0.020", operating from -40 to 85°C. Ideal for commercial applications requiring a durable, surface-mountable connector with UL certification.
1-1761606-3
TE Connectivity
TE Connectivity 1-1761606-3 is a 2-row, 40-contact board connector with a mating contact pitch of 0.1". Featuring POLYBUTYLENE TEREPHTHALATE insulator material and rated for up to 1A signal current, it is ideal for commercial applications requiring reliable connections in temperatures ranging from -65°C to 105°C.
10-11-2023
Molex 10-11-2023 is a board connector with 0.1" mating contact pitch, POLYAMIDE insulator, and 1000VAC dielectric voltage. It's ideal for commercial applications requiring a durable, polarized housing with 2 contacts and crimp termination for 22-30 AWG wires.
DF11-16DP-2DSA(01)
Hirose Electric
DF11-16DP-2DSA(01) by Hirose Electric is a 16-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and gold finish. It is used in applications requiring a durable, high-current signal connection with UL and CSA standards compliance. The connector has a straight mounting style, black insulator color, and operates b/w -30 to 85°C temperatures.
BM04B-SRSS-G-TB(LF)(SN)
BM04B-SRSS-G-TB(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with Tin (Sn) finish. Made of copper alloy, it has UL 94V-0 flammability rating and surface mount termination. Ideal for straight board mounting applications in electronics.
834-47-053-10-001000
BOARD CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD;
1-826656-0
TE Connectivity 1-826656-0 is a board connector with 20 contacts, rated at 5A. It features tin termination finish, PBT insulator, and phosphor bronze contact material. With UL certification and green insulator color, it is ideal for applications requiring high insulation resistance and operating temperatures from -65 to 105°C.
EHF-110-01-F-D
Samtec
The Samtec EHF-110-01-F-D header connector features a 0.05" contact pitch, suitable for PCBs with 1.27mm row spacing. With gold flash over nickel contacts and liquid crystal polymer insulator, it offers reliable performance in commercial applications at temperatures ranging from -55°C to 125°C. This polarized housing connector has a total of 20 contacts and is ideal for board mounting with solder termination.
154763-E
TE Connectivity's 154763-E header connector features a mating contact pitch of 0.05", insulation resistance of 10^10 ohm, and dielectric voltage rating of 707VAC. Ideal for board mounting applications in electronics, this male connector with liquid crystal polymer insulator offers durability up to 500 cycles at temperatures ranging from -55°C to 125°C.
3220-10-0100-00
Cnc Tech
Cnc Tech's 3220-10-0100-00 is a board connector with 2 rows, 10 contacts made of brass with gold flash finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for applications requiring male connectors on boards with straight mounting style.
5-146280-2
TE Connectivity 5-146280-2 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring matte tin over nickel finish, it has an insulation resistance of 5000000000 ohm and operates b/w -65 to 105°C. Ideal for use in electronics requiring a reliable male receptacle connection with solder termination.
TSW-106-17-T-S
Samtec TSW-106-17-T-S is a 6-contact board connector with 0.1" pitch, ideal for commercial applications. Featuring tin contact finish and polybutylene terephthalate insulator, it operates b/w -55°C to 105°C. With a rectangular PCB pattern and solder termination, this male connector offers reliable performance in various electronic devices.
QSH-030-01-L-D-A-TR
Samtec's QSH-030-01-L-D-A-TR is a 60-contact, 2-row stacking connector with 0.02" pitch. It features tin finish with nickel barrier, operates b/w -55°C to 125°C, and supports up to 1A signal current. Ideal for board-to-board applications requiring high reliability in commercial settings.
473882001
Molex 473882001 is a PCB connector with 0.1" pitch, GOLD NICKEL finish, and GLASS FILLED LCP insulator. It has 6 contacts, rated for 0.5A signal current, and operates b/w -40 to 85°C. Ideal for commercial applications requiring durable surface mount connectors on boards with 16.764mm row spacing.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TW-06-03-S-S-310-095
Samtec TW-06-03-S-S-310-095 is a 6-contact, board stacking connector with a mating contact pitch of 0.079 inches. It has a max operating temperature of 125°C and insulation resistance of 5GΩ. This connector is commonly used in commercial applications requiring reliable connections on PCBs.
TW-06-04-L-S-170-SM
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER; Filter Feature: NO;
TW-06-12-G-D-600-375
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO; Reference Standard: UL;
TW-06-01-T-S-150-085
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Style: STRAIGHT;
TW-06-06-L-D-300-100
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Finish: GOLD (10) OVER NICKEL (50); PCB Contact Pattern: RECTANGULAR;
TW06-03-F-S-250-150
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Plating Thickness (inch): FLASH;
TW-06-03-F-S-250-SM-P
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Plating Thickness (inch): 3u;
TW-06-03-F-S-250-SM-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0;
TW-06-03-F-S-250-SM
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Additional Features: STAGGERED CONFIGURATION;
TW-06-03-F-S-265-090
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Body Length: .474 inch;
TW-06-03-F-S-270-090
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: PHOSPHOR BRONZE; Maximum Operating Temperature (Cel): 125;
TW-06-03-F-S-275-090
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Insulator Color: BLACK; MIL Conformity: NO;
TW-06-03-F-S-280-090
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; MIL Conformity: NO; Total No. of Contacts: 6;
TW-06-03-F-S-285-090
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 1; Termination Type: SOLDER;
TW-06-03-F-S-290-090
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR; UL Flammability Code: 94V-0;
TW-06-03-F-S-295-090
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; MIL Conformity: NO; Mounting Style: STRAIGHT;
TW-06-03-F-S-205-118
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mounting Type: BOARD; JESD-609 Code: e3;
TW-06-03-F-S-295-SM-P-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 2; Filter Feature: NO;
TW-06-03-F-S-220-130
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1050VAC; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.079;
TW-06-03-F-S-265-050
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1050VAC; No. of Connectors: ONE; Body Depth: .265 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved