Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec TFML-130-02-S-D-A-K-TR is a 60-contact board connector with 0.05" pitch, suitable for commercial applications. Features include 1.625" body length, 1000VAC dielectric voltage, and -65 to 125°C operating temperature range. Ideal for PCB connections requiring high insulation resistance and phosphor bronze contacts with tin finish.
Median Price
$11.240
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$8.121
1k+ parts
-
10k+ parts
Nova Conductors
$9.170
Vyrian
Bastille Electronics
$8.712
$8.161
Continental Prestige Electronics
$8.987
AZTECH Wire
$16.089
Authorized Procurement Solutions
Argo Parts USA
Close contact pitch allows for more contacts to be placed in a smaller space, increasing connectivity options.
Standard body length for easy integration into existing circuit designs.
High insulation resistance ensures minimal signal loss and interference.
Slim body width allows for space-saving design and efficient use of board space.
High dielectric strength ensures safe operation and protection against high voltage.
Tin finish with nickel barrier provides excellent conductivity and corrosion resistance.
Compact body depth is ideal for applications with limited space availability.
Liquid crystal polymer offers superior thermal and mechanical properties for reliable performance.
Dual rows loaded with contacts provide increased connectivity options.
Positioning pin ensures secure and accurate board mounting for stable connection.
High maximum operating temperature allows for use in a wide range of environments.
Optimal row spacing for efficient PCB layout and signal transmission.
Low minimum operating temperature ensures reliable performance in extreme cold conditions.
Thick plating thickness ensures durability and long-term performance.
Dual PCB rows provide redundancy and increase connectivity options.
Specifically designed for board-to-board connections, ensuring seamless integration.
Phosphor bronze contact material offers high conductivity and resistance to corrosion.
Gold-on-nickel mating contact finish ensures reliable and low-resistance connections.
Polarized housing prevents incorrect mating and ensures secure connections.
High-rated current signal capacity for efficient power transmission.
Black insulator color for easy identification and aesthetically pleasing design.
UL certification ensures the product meets industry safety standards.
Large number of contacts provide versatile connectivity options for various applications.
Single connector design for easy installation and streamlined connectivity.
Close mating contact row spacing for efficient signal transmission and reduced interference.
Board mounting type for secure and stable connection to PCBs.
Standard terminal pitch for compatibility with a wide range of applications.
Rectangular PCB contact pattern for efficient signal transmission and easy integration.
Surface mount termination type for easy and secure installation on PCBs.
Male contact gender for easy mating with female connectors.
Receptacle body style for secure and reliable connections.
Straight mounting style for easy installation and alignment on PCBs.
Round pin socket contact style for reliable and durable connections.
Locking mounting option ensures secure connection and prevents accidental disconnection.
Rectangular contact pattern for efficient signal transmission and easy alignment.
Commercial grade reliability for dependable performance in various applications.
Headers & Edge Type Connectors TFML-130-02-S-D-A-K-TR attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
Dielectric Withstanding Voltage (V):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
TFML-130-02-S-D-A-K-TR Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
4554
Jw Miller Magnetics
Other Semiconductors;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
Dc Components
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
280371-2
TE Connectivity 280371-2 is a BOARD CONNECTOR with 4 contacts, 0.1" pitch, and POLYETHYLENE insulator. It has a temperature range of -65 to 105°C and features BRASS contacts with Tin finish. Ideal for commercial applications requiring reliable connections in electrical systems.
78172-0004
Molex 78172-0004 is a board connector with 0.047" pitch, GOLD finish, and 100000000 ohm insulation resistance. Ideal for commercial applications, it has a temperature range of -25 to 85 °C and can handle up to 1.5A signal current in cable mounting setups.
FTSH-105-01-L-DV-K-P-FR
Samtec
The Samtec FTSH-105-01-L-DV-K-P-FR is a 2-row, 10-contact male board connector with tin finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications requiring straight mounting style.
10-11-2023
Molex 10-11-2023 is a board connector with 0.1" mating contact pitch, POLYAMIDE insulator, and 1000VAC dielectric voltage. It's ideal for commercial applications requiring a durable, polarized housing with 2 contacts and crimp termination for 22-30 AWG wires.
61300211121
Wuerth Elektronik & Kg
61300211121 by Wuerth Elektronik & Kg is a board connector with a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage of 500VAC. It is used in applications requiring a rated current of 3A, operating temperatures from -40 to 125°C, and UL94V-0 flammability compliance.
351-80-139-00-004101
Preci-dip Sa
351-80-139-00-004101 by Preci-dip Sa is a BOARD CONNECTOR with 39 contacts, BRASS material, and TIN finish. It has a terminal pitch of 2.54mm and UL Flammability Code of 94V-0. Ideal for applications requiring reliable male connectors on circuit boards with solder termination.
SFW12S-2STE1LF
Amphenol Communications Solutions
The Amphenol SFW12S-2STE1LF is a 12-contact FFC/FPC connector with 0.039" pitch, tin finish, and UL94V-0 flammability rating. It is designed for surface mount board applications, featuring female contacts in a straight mounting style. Ideal for compact electronic devices requiring reliable signal transmission.
09031646921
Harting Electronics & Kg
09031646921 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Body Length of 3.701", and Insulation Resistance of 1000000000000 ohm. Ideal for board connections in applications requiring high durability, it features a PCB Contact Row Spacing of 2.54mm, UL Flammability Code of 94V-0, and Rated Current - Signal at 2A.
BM06B-SRSS-TBT(LF)(SN)
J S T Mfg
BM06B-SRSS-TBT(LF)(SN) by J S T Mfg is a 6-contact board connector with copper alloy contacts and tin over copper finish. It is a straight mounting style, surface mount termination type suitable for applications requiring UL 94V-0 flammability code compliance in headers & edge type connectors.
853-87-054-30-001101
853-87-054-30-001101 by Preci-dip Sa is a BOARD CONNECTOR with 54 contacts, BERYLLIUM COPPER material, and TIN finish. It is ideal for surface mount applications in headers & edge type connectors, offering a terminal pitch of 1.27mm and UL Flammability Code of 94V-0.
5025700893
Molex 5025700893 is a PCB connector with 0.043" pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for board mounting applications, featuring liquid crystal polymer insulator material and right angle mounting style. Suitable for commercial use with 8 contacts, rated at 0.5A signal current and durability of 10000 cycles.
52271-1669
Molex 52271-1669 is a FFC/FPC connector with 16 contacts, mating pitch of 0.039", and body width of 0.118". It features TIN over nickel termination finish, polyamide insulator, and UL94V-0 flammability rating. Ideal for board mounting applications requiring surface mount termination in commercial settings.
B3B-PH-K-S(LF)(SN)
B3B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator, operates b/w -25 to 85 °C, and features TIN contact finish. Ideal for applications requiring reliable board-to-board connections in electronic devices.
DM3AT-SF-PEJM5(40)
Hirose Electric
The Hirose Electric DM3AT-SF-PEJM5(40) is a PCB connector with 0.043" mating contact pitch, GOLD finish, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a liquid crystal polymer insulator, operates b/w -25 to 85 °C, and offers durability of 10000 cycles.
BM04B-GHS-TBT(LF)(SN)(N)
BM04B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, 0.049" pitch, and 100000000 ohm insulation resistance. It has POLYAMIDE9T insulator material, operates b/w -25 to 85 °C, and features TIN/CU termination finish. Ideal for applications requiring a male contact gender in surface mount configuration with a rectangular PCB contact pattern.
796136-1
TE Connectivity 796136-1 is a PCB connector with Liquid Crystal Polymer insulator. It has 2 contacts, rated at 7A for signal current. With right-angle mounting style and compression contact, it's ideal for applications requiring a compact design and high operating temperatures up to 100°C.
VHR-5N
VHR-5N by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.156" pitch, 1500VAC voltage withstand, and 1000000000 ohm insulation resistance. Ideal for cable mounting applications, it features POLYAMIDE insulator material and operates b/w -25 to 85 °C.
DF11-8DP-2DSA(01)
DF11-8DP-2DSA(01) by Hirose Electric is a 2-row, 8-contact board connector with gold over nickel termination. Featuring a mating contact pitch of 0.079", it offers high insulation resistance of 1Gohm and withstands up to 650VAC. Ideal for commercial applications, this connector has a temperature range from -30°C to 85°C and boasts durability of 50 cycles.
TSW-103-07-T-D
Samtec's TSW-103-07-T-D is a 2-row, 6-contact board connector with a mating contact pitch of 0.1". Featuring matte tin finish and phosphor bronze contacts, it has a body width, depth, and terminal length of 0.1 inch each. Ideal for PCB applications requiring reliable male connectors with solder termination in a straight mounting style.
XAP-10V-1
XAP-10V-1 by J S T Mfg is a 10-contact BOARD CONNECTOR with FEMALE contacts, PLUG body style, and CRIMP termination. It has UL 94V-0 flammability rating and is used for CABLE mounting applications in Headers & Edge Type Connectors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TFML-105-01-L-D-RA
Samtec TFML-105-01-L-D-RA is a 10-contact board connector with 0.05" pitch, ideal for commercial applications. Features include tin termination finish, phosphor bronze contacts, and liquid crystal polymer insulator. Suitable for PCBs with 1.27mm terminal pitch in right-angle mounting configurations.
TFML-140-02-S-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
TFML-105-01-L-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
TFML-105-01-L-D-A
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Pitch (mm): 1.27; Minimum Operating Temperature: -55 Cel;
TFML-105-01-L-D-A-P
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mounting Type: BOARD; Terminal Pitch (mm): 1.27;
TFML-105-01-L-D-K
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; No. of PCB Rows: 2;
TFML-105-01-L-D-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Reference Standard: UL, CSA; No. of Rows Loaded: 2;
TFML-105-01-L-D-LC-P
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Filter Feature: NO; UL Flammability Code: 94V-0;
TFML-105-01-L-D-P
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; MIL Conformity: NO; IEC Conformity: NO;
TFML-107-02-S-D-LC
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: TIGER EYE, SHROUDED; Mixed Contacts: NO; JESD-609 Code: e3;
TFML-140-01-S-D-RA
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: .29 inch;
TFML-122-02-S-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: SHROUDED; Termination Type: SURFACE MOUNT; Mounting Type: BOARD;
TFML-122-02-S-D-LC-P-TR
Samtec's TFML-122-02-S-D-LC-P-TR is a 24-contact, 2-row board stacking connector with gold mating finish. Featuring solder termination and 1.27mm pitch, it is UL94V-0 rated for high flammability resistance. Ideal for board mounting applications requiring male contact gender in straight style configurations.
TFML-122-02-S-D-LC-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: .22 inch; Body Length: 1.225 inch;
TFML-107-02-S-D-LC-K
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 2; UL Flammability Code: 94V-0;
TFML-107-02-S-D-LC-P-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Total No. of Contacts: 14; Terminal Pitch (mm): 1.27;
TFML-110-02-S-D
Samtec's TFML-110-02-S-D header connector has a 0.05" contact pitch, matte tin finish with nickel barrier, and liquid crystal polymer insulator. With 20 contacts in 2 rows, it operates b/w -55°C to 125°C. Ideal for board connections in commercial applications requiring reliable surface mount termination.
TFML-110-01-S-D
TFML-110-01-S-D by Samtec is a 2-row, 20-contact board connector with a mating contact pitch of 0.05 inches. It features a liquid crystal polymer insulator and matte tin finish over nickel for termination contact. This connector is commonly used in commercial applications requiring reliable signal transmission at temperatures ranging from -55 to 125°C.
TFML-120-02-S-D-A
The Samtec TFML-120-02-S-D-A is a 40-contact board connector with a mating contact pitch of 0.05". It features tin termination finish, liquid crystal polymer insulator, and operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, polarized housing with straight mounting style.
TFML-120-02-S-D-A-K-TR
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE; Terminal Pitch (mm): 1.27;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved