Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec's TFML-122-02-S-D-LC-TR is a 44-contact board connector with 0.05" mating pitch, suitable for applications requiring high durability and signal current up to 3.2A. Featuring a liquid crystal polymer insulator, this male connector has a surface mount termination type and operates b/w -55°C to 125°C temperature range.
Median Price
$6.720
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Corohmni
$3.867
Aztec Data Supply Inc.
$6.100
Aranea Global
$6.586
$6.322
Continental Prestige Electronics
AZTECH Wire
$18.610
Argo Parts USA
Having a small mating contact pitch of 0.05 inch allows for high density connections, making this product suitable for applications requiring a large number of connections in a limited space.
The body length of 1.225 inch provides ample space for the connectors to securely hold the contacts and ensure proper functionality.
With a narrow body width of 0.225 inch, this connector can fit into tight spaces on a PCB without compromising on performance.
The tin with nickel barrier termination contact finish ensures reliable and enduring electrical connections, reducing the risk of corrosion and signal degradation over time.
The use of LIQUID CRYSTAL POLYMER as the insulator material offers excellent durability, resistance to heat, and electrical insulation properties to safeguard the contacts and improve overall product performance.
With two loaded rows, this connector provides multiple contact points for increased signal transmission capacity and reliability.
This connector can withstand high temperatures up to 125 °C, making it suitable for a wide range of industrial and electronic applications.
Having a UL Flammability Code of 94V-0 indicates that this product meets strict safety standards for fire resistance, ensuring reliable performance in hazardous environments.
With a rated current of 3.2 A for signal transmission, this connector can handle high electrical loads without compromising on signal integrity.
With a durability rating of 10000 cycles, this connector is built to withstand repeated insertions and removals, ensuring long-lasting performance in demanding applications.
Headers & Edge Type Connectors TFML-122-02-S-D-LC-TR attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Termination Contact Finish:
Contact Gender:
Contact Pattern:
Contact Style:
Durability:
Filter Feature:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
TFML-122-02-S-D-LC-TR Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
Protek Devices
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Eic Semiconductor
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
Bytesonic Electronics
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
New Jersey Semiconductor Products
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
Microsemi
53048-0210
Molex
Molex 53048-0210 is a board connector with 2 contacts, 0.049" pitch, and TIN finish. It has a polyamide insulator, operates b/w -40 to 85°C, and features right-angle mounting. Ideal for commercial applications requiring reliable male connectors with rectangular contact pattern.
351-10-139-00-004101
Preci-dip Sa
351-10-139-00-004101 by Preci-dip Sa is a BOARD CONNECTOR with GOLD contact finish. Featuring 39 contacts on a 2.54mm pitch, it is ideal for board mounting applications requiring male BRASS contacts. With UL Flammability Code of 94V-0, this STRAIGHT mounting style connector ensures reliable solder termination.
43025-1600
The Molex 43025-1600 is a board connector with 16 contacts, rated at 2.5A signal current. It has a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring reliable connections in tight spaces.
803-93-010-20-001000
Mill-max Mfg
Mill-max Mfg 803-93-010-20-001000 is a 10-contact, dual-row board connector with tin/lead finish. Featuring beryllium copper contacts on a right-angle socket, it's ideal for PCB mounting applications with 2.54mm terminal pitch and solder termination.
70553-0004
Molex 70553-0004 is a board connector with 0.1" pitch, ideal for commercial applications. Features TIN over nickel finish, UL94V-0 rated black polycarbonate insulator, and 15u plating thickness. Suitable for right-angle mounting on PCBs with rectangular contact pattern.
5-146281-2
TE Connectivity
TE Connectivity 5-146281-2 is a board connector with mating contact pitch of 0.1". Featuring matte tin finish, it has insulation resistance of 5000000000 ohm and operates b/w -65 to 105 °C. Ideal for commercial applications, this male connector has a rated current of 3A and UL flammability rating of 94V-0.
S3B-PH-SM4-TB(LF)(SN)
J S T Mfg
S3B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with surface mount termination and right angle mounting style.
M80-5002042
Harwin Plc
The Harwin PLC M80-5002042 is a 20-contact board connector with 0.079" mating contact pitch, suitable for PCB applications. Featuring tin finish with nickel barrier, it offers high insulation resistance of 100M ohm and operates b/w -55°C to 125°C. With a durable design rated for 500 cycles, this male plug connector is ideal for commercial use in electronics requiring reliable signal transmission.
MTCB2X-205-XXXCS061
BOARD CONNECTOR;
103
Keystone Electronics
103 by Keystone Electronics is a PCB connector with 2 contacts, made of POLYBUTYLENE TEREPHTHALATE. It has a body length of 1.13" and depth of 0.335", with terminal pitch of 20.49mm. Ideal for straight mounting on boards, it features male contact gender and leaf-style contacts in a rectangular pattern.
M50-3600542
The Harwin PLC M50-3600542 is a 10-contact board connector with 0.05" mating contact pitch, suitable for PCB applications. Featuring a 1A signal current rating, it has a durable design with 300 cycles lifespan and operates b/w -40°C to 105°C temperature range. The connector has tin finish contacts and polyethylene insulation material, meeting UL standards for reliability.
53253-0470
The Molex 53253-0470 is a board connector with a mating contact pitch of 0.079 inches and a body width of 0.144 inch. It features bright tin termination contact finish and is commonly used in commercial applications for its reliability and multiple mating parts availability.
22-03-5025
Molex 22-03-5025 is a board connector with 0.098" mating contact pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulation material, it offers 1000000000 ohm insulation resistance and operates b/w -40 to 105 °C. With a rated current of 3A, this connector has a durability of 30 cycles and is UL recognized for reliability in commercial applications.
5103309-1
TE Connectivity's 5103309-1 header connector features a mating contact pitch of 0.1", insulation resistance of 5G ohm, and operating temperatures from -65 to 105°C. Ideal for board connections in commercial applications requiring a male plug with solder termination and UL flammability rating of 94V-0.
SHR-07V-S-B
SHR-07V-S-B by J S T Mfg is a 1-row loaded board connector with 7 contacts. It has a UL flammability code of 94V-0 and uses crimp termination. This connector is commonly used in cable mounting applications.
EHR-3
EHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.098" pitch, 0.15"x.28" body size, and UL 94V-0 flammability rating. It is used for cable mounting with female contacts terminated via crimping, ideal for electronic applications requiring compact and reliable connections.
DF11-18DS-2C
Hirose Electric
DF11-18DS-2C by Hirose Electric is a 2-row board connector with 18 contacts, rated at 2A signal current. It features a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for commercial applications requiring durable connectors with crimp termination and black insulator color.
B2B-ZR(LF)(SN)
B2B-ZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" mating contact pitch, 500VAC dielectric voltage, and 1A signal current rating. Ideal for applications requiring a polarized housing, this connector features GLASS FILLED POLYAMIDE66 insulation material and solder termination for reliable performance in temperatures ranging from -25 to 85 °C.
22-05-2081
Molex 22-05-2081 is a board connector with 8 contacts, featuring brass contact material and matte tin finish. With a mating pitch of 0.1", it offers high insulation resistance of 1000000000 ohm. Ideal for commercial applications, this connector has a durable design with UL flammability rating of 94V-0.
S2B-PH-K-S(LF)(SN)
S2B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, 800VAC dielectric voltage, and 2A signal current rating. Ideal for applications requiring a male connector with press fit termination, right angle mounting style, and natural insulator color.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TFML-105-01-L-D-RA
Samtec
Samtec TFML-105-01-L-D-RA is a 10-contact board connector with 0.05" pitch, ideal for commercial applications. Features include tin termination finish, phosphor bronze contacts, and liquid crystal polymer insulator. Suitable for PCBs with 1.27mm terminal pitch in right-angle mounting configurations.
TFML-140-02-S-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
TFML-105-01-L-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
TFML-105-01-L-D-A
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Pitch (mm): 1.27; Minimum Operating Temperature: -55 Cel;
TFML-105-01-L-D-A-P
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mounting Type: BOARD; Terminal Pitch (mm): 1.27;
TFML-105-01-L-D-K
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; No. of PCB Rows: 2;
TFML-105-01-L-D-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Reference Standard: UL, CSA; No. of Rows Loaded: 2;
TFML-105-01-L-D-LC-P
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Filter Feature: NO; UL Flammability Code: 94V-0;
TFML-105-01-L-D-P
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; MIL Conformity: NO; IEC Conformity: NO;
TFML-107-02-S-D-LC
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: TIGER EYE, SHROUDED; Mixed Contacts: NO; JESD-609 Code: e3;
TFML-140-01-S-D-RA
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: .29 inch;
TFML-122-02-S-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: SHROUDED; Termination Type: SURFACE MOUNT; Mounting Type: BOARD;
TFML-122-02-S-D-LC-P-TR
Samtec's TFML-122-02-S-D-LC-P-TR is a 24-contact, 2-row board stacking connector with gold mating finish. Featuring solder termination and 1.27mm pitch, it is UL94V-0 rated for high flammability resistance. Ideal for board mounting applications requiring male contact gender in straight style configurations.
TFML-107-02-S-D-LC-K
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 2; UL Flammability Code: 94V-0;
TFML-107-02-S-D-LC-P-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Total No. of Contacts: 14; Terminal Pitch (mm): 1.27;
TFML-110-02-S-D
Samtec's TFML-110-02-S-D header connector has a 0.05" contact pitch, matte tin finish with nickel barrier, and liquid crystal polymer insulator. With 20 contacts in 2 rows, it operates b/w -55°C to 125°C. Ideal for board connections in commercial applications requiring reliable surface mount termination.
TFML-110-01-S-D
TFML-110-01-S-D by Samtec is a 2-row, 20-contact board connector with a mating contact pitch of 0.05 inches. It features a liquid crystal polymer insulator and matte tin finish over nickel for termination contact. This connector is commonly used in commercial applications requiring reliable signal transmission at temperatures ranging from -55 to 125°C.
TFML-120-02-S-D-A
The Samtec TFML-120-02-S-D-A is a 40-contact board connector with a mating contact pitch of 0.05". It features tin termination finish, liquid crystal polymer insulator, and operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, polarized housing with straight mounting style.
TFML-120-02-S-D-A-K-TR
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE; Terminal Pitch (mm): 1.27;
TFML-122-02-F-D-LC-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Reference Standard: UL; Total No. of Contacts: 44;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved