Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Samtec MTSW-112-28-L-T-930 is a 3-row board stacking connector with 36 contacts. It features TIN over nickel termination, gold over nickel mating contact finish, and phosphor bronze contact material. Ideal for board mounting applications with a terminal pitch of 2.54mm, suitable for male connectors in straight mounting style.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
AZTECH Wire
$13.460
Argo Parts USA
Continental Prestige Electronics
Netroflash
The TIN over nickel finish ensures a durable and reliable connection, making this product a good choice for long-term use.
Having 3 rows loaded allows for multiple connections to be made easily, making this product suitable for complex circuit designs.
The board stacking connector type enables efficient stacking of multiple boards, making this product ideal for compact and space-saving designs.
The use of phosphor bronze as the contact material ensures good electrical conductivity and corrosion resistance, making this product reliable in various environments.
The gold over nickel mating contact finish provides low contact resistance and high durability, making this product a reliable choice for mating connectors.
With a total of 36 contacts, this product allows for multiple connections to be made simultaneously, making it suitable for applications requiring numerous connections.
The board mounting type offers secure and stable mounting, making this product ideal for applications where stability is important.
The 2.54mm terminal pitch allows for easy and precise connections, making this product user-friendly and suitable for various applications.
The solder termination type ensures a strong and reliable connection, making this product suitable for applications where connections need to withstand mechanical stress.
The male contact gender ensures compatibility with female connectors, making this product versatile and suitable for a wide range of applications.
The straight mounting style offers easy and straightforward installation, making this product convenient to use in various applications.
Headers & Edge Type Connectors MTSW-112-28-L-T-930 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
MTSW-112-28-L-T-930 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
ROHM
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
826634-3
TE Connectivity 826634-3 is a 2-row board connector with 0.1" contact pitch, suitable for commercial applications. With insulation resistance of 5G ohm and operating temperature range from -65 to 105°C, it features POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for PCB mounting with right-angle plug style, rated at 5A signal current.
VHR-2N
J S T Mfg
VHR-2N by J S T Mfg is a 2-contact BOARD CONNECTOR with POLYAMIDE6 insulator. Featuring mating pitch of 0.156", it has 0.309" x 0.244" x 0.413" dimensions. Ideal for CABLE mounting, CRIMP termination, and applications requiring FEMALE SQ PIN-SKT contacts.
26-60-4040
Molex
Molex 26-60-4040 is a board connector with 4 contacts, 0.156" pitch, and 1500VAC dielectric voltage. Ideal for commercial applications, it features polyester insulation, brass contacts, and -40 to 105°C operating temperature range.
FTSH-107-01-L-DV-K-P-TR
Samtec
Samtec FTSH-107-01-L-DV-K-P-TR is a 14-contact board connector with 0.05" pitch, ideal for commercial applications. Features include liquid crystal polymer insulator, phosphor bronze contact material, and gold mating finish over nickel. With a temperature range of -55 to 125°C, it offers reliable signal current up to 3.3A.
FTSH-110-01-L-DV-K-TR
Samtec's FTSH-110-01-L-DV-K-TR is a 2-row, 20-contact board connector with a contact pitch of 1.27mm and body dimensions of 0.5" x 0.135" x 0.241". It features phosphor bronze contacts with gold finish, suitable for commercial applications requiring a temperature range of -55 to 125°C.
2-5767004-2
Tyco Electronics Amp
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 5767004; Mounting Style: STRAIGHT; Total No. of Contacts: 38;
801-43-030-10-013000
Mill-max Mfg
The Mill-max Mfg 801-43-030-10-013000 is a board connector with 30 contacts, gold over nickel finish. It has a terminal pitch of 2.54mm and UL flammability code of 94V-0. Ideal for applications requiring reliable female socket connections on circuit boards.
B2B-ZR-SM4-TF(LF)(SN)
B2B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
DF13-3S-1.25C
Hirose Electric
DF13-3S-1.25C by Hirose Electric is a 3-contact board connector with 0.049" pitch, 500VAC voltage resistance, and 85°C max operating temp. Ideal for commercial applications, it features female contacts, beige insulator color, and UL94V-0 flammability rating for reliable signal transmission in various environments.
61303211021
Wuerth Elektronik & Kg
61303211021 by Wurth Elektronik is a BOARD CONNECTOR with 32 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.1", it has gold (Au) - nickel (Ni) finish and operates b/w -40 to 125 °C. Ideal for commercial applications requiring high insulation resistance and UL certification.
MEC1-130-02-F-D-RA1-SL
Samtec's MEC1-130-02-F-D-RA1-SL is a 2-row, 60-contact card edge connector with a mating contact pitch of 0.039". It features tin termination finish and gold flash over nickel mating finish. Ideal for commercial applications requiring a right-angle, surface-mount female socket connector on PCBs.
853-93-010-20-001000
Mill-max Mfg 853-93-010-20-001000 is a 10-contact, dual-row board connector with tin/lead finish. Featuring beryllium copper contacts, it's ideal for right-angle mounting on boards. This socket connector has a pitch of 1.27mm and is suitable for various electronic applications.
929665-04-36-EU
3m Electronic Products Division
3m Electronic Products Division's 929665-04-36-EU is a 72-contact, 2-row board connector with gold over nickel termination. It features copper alloy contacts, UL94V-0 flammability rating, and male gender. Ideal for straight mounting on boards, this connector has a terminal pitch of 2.54mm and is suitable for headers & edge type applications.
FTSH-110-01-L-DV-K-A-P
Samtec's FTSH-110-01-L-DV-K-A-P is a 2-row, 20-contact board connector with a contact pitch of 1.27mm. It features gold mating contacts over nickel, suitable for commercial applications with an operating temperature range from -55 to 125°C. The connector has a straight mounting style and uses liquid crystal polymer insulator material.
39-53-2165
Molex 39-53-2165 FFC/FPC Connector features 16 contacts with 0.049" pitch, 0.197" body width, and 0.386" depth. Ideal for PCB applications requiring a 1.9812mm row spacing, this UL-certified connector offers reliable solder termination in commercial settings.
70543-0002
Molex 70543-0002 is a board connector with 0.1" pitch, suitable for applications requiring 3A signal current. Featuring matte tin finish, it offers high durability with 50 cycles and operates b/w -40 to 105°C temperature range. Ideal for commercial use, this connector has a polarization key and UL94V-0 flammability rating.
154763-E
TE Connectivity's 154763-E header connector features a mating contact pitch of 0.05", insulation resistance of 10^10 ohm, and dielectric voltage rating of 707VAC. Ideal for board mounting applications in electronics, this male connector with liquid crystal polymer insulator offers durability up to 500 cycles at temperatures ranging from -55°C to 125°C.
SIM8066-6-1-14-01-A
Global Connector Technology
SIM8066-6-1-14-01-A by Global Connector Technology is a PCB connector with 2 rows, 6 contacts, and insulation resistance of 1000000000 ohm. It has a dielectric voltage of 500VAC, operates b/w -40 to 85 °C, and is ideal for applications requiring a durable female connector with right-angle mounting.
1025
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
SHF-105-01-L-D-SM
SHF-105-01-L-D-SM by Samtec is a 2-row board connector with a mating contact pitch of 0.05". Featuring gold over nickel finish, it has a rated signal current of 1.75A and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MTSW-102-07-G-S-240
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; JESD-609 Code: e4;
MTSW-102-07-F-S-170
The Samtec MTSW-102-07-F-S-170 is a board stacking connector with 2.54mm terminal pitch and TIN over nickel termination. It features gold flash mating contacts, phosphor bronze contact material, and is ideal for male contact gender applications requiring solder termination on boards.
MTSW-102-07-F-S-155
The Samtec MTSW-102-07-F-S-155 is a board stacking connector with 0.1" mating contact pitch, suitable for applications requiring male contacts. Featuring gold flash over nickel finish and glass-filled polyester insulator, it operates b/w -55°C to 125°C. Ideal for PCB mounting with 2.54mm terminal pitch and solder termination.
MTSW-103-07-G-S-135
Samtec's MTSW-103-07-G-S-135 is a 3-contact board stacking connector with gold over nickel termination. Featuring a 0.1" mating contact pitch, it uses phosphor bronze contacts and glass-filled polyester insulator for durability. Ideal for commercial applications requiring reliable male connectors on PCBs.
MTSW-102-07-L-S-200
The Samtec MTSW-102-07-L-S-200 is a board stacking connector with 0.1" mating contact pitch, TIN over nickel termination finish, and glass-filled polyester insulator. It has gold over nickel mating contacts, 2.54mm terminal pitch, and solder termination for commercial applications in electronics.
MTSW-102-07-F-S-190
MTSW-102-07-F-S-190 by Samtec is a board stacking connector with 2.54mm terminal pitch. It has a single row loaded with male contacts made of phosphor bronze and finished with gold flash. This connector is commonly used in applications requiring reliable solder termination for headers and edge type connectors.
MTSW-102-07-L-S-110-RA
The Samtec MTSW-102-07-L-S-110-RA is a board stacking connector with 2.54mm terminal pitch. It features gold over nickel mating contact finish and solder termination for male contacts. Ideal for applications requiring right angle mounting in headers & edge type connectors category.
MTSW-102-07-L-S-189
Samtec's MTSW-102-07-L-S-189 is a board stacking connector with 2.54mm terminal pitch. Featuring gold over nickel mating contact finish, it uses solder termination for male contacts. Ideal for headers & edge type connectors in various electronic applications.
MTSW-102-07-L-S-160
The Samtec MTSW-102-07-L-S-160 is a board stacking connector with 2.54mm terminal pitch. It features gold over nickel mating contact finish and solder termination for male contacts. Ideal for applications requiring high-quality edge type connectors in electronic devices.
MTSW-103-07-G-S-240
MTSW-103-07-G-S-240 by Samtec is a 1-row, 3-contact board stacking connector with a mating contact pitch of 0.1 inches. It features gold (Au) termination contact finish and is commonly used in commercial applications requiring reliable connections.
MTSW-102-07-G-S-100-RA
Samtec's MTSW-102-07-G-S-100-RA is a board stacking connector with 2.54mm terminal pitch. Featuring gold over nickel finish, it has 2 male contacts and right-angle mounting style. Ideal for applications requiring reliable connections in compact spaces.
MTSW-102-07-F-S-210
Samtec's MTSW-102-07-F-S-210 is a BOARD STACKING CONNECTOR with 2.54mm Terminal Pitch, Tin (Sn) finish. Ideal for board mounting applications, it features 2 male contacts and solder termination, making it suitable for various electronic devices.
MTSW-102-07-L-S-130
Samtec's MTSW-102-07-L-S-130 is a 1-row board stacking connector with 2 contacts, featuring phosphor bronze contact material and gold over nickel mating finish. It has a terminal pitch of 2.54mm, solder termination, and male contact gender. Ideal for board mounting applications requiring reliable connections in electronic devices.
MTSW-102-07-F-S-150
Samtec's MTSW-102-07-F-S-150 is a BOARD STACKING CONNECTOR with 2.54mm Terminal Pitch, Tin (Sn) finish. Ideal for board-to-board connections in electronics applications.
MTSW-102-07-G-S-175
The Samtec MTSW-102-07-G-S-175 is a board stacking connector with 2.54mm terminal pitch. It features gold over nickel termination contact finish and phosphor bronze contact material. Ideal for applications requiring male connectors in straight mounting style on boards.
MTSW-102-07-G-S-213
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Mixed Contacts: NO; Termination Type: SOLDER;
MTSW-103-07-G-S-170
The Samtec MTSW-103-07-G-S-170 is a board stacking connector with 3 contacts. It features gold over nickel termination, phosphor bronze contact material, and a pitch of 2.54mm. Ideal for applications requiring male connectors in straight mounting style on boards.
MTSW-105-11-F-D-228
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Termination Contact Finish: TIN OVER NICKEL; No. of Rows Loaded: 2;
MTSW-102-07-F-S-130-RA
The Samtec MTSW-102-07-F-S-130-RA is a board stacking connector with 2 contacts, featuring a mating contact pitch of 0.1" and termination finish of Tin (Sn) with Nickel (Ni). It has a temperature range from -55 to 125°C, ideal for applications requiring right angle mounting on PCBs.
MTSW-120-08-T-D-100
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Mounting Style: STRAIGHT; Total No. of Contacts: 40;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved