Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DF19-20S-1C by Hirose Electric is a 20-contact FFC/FPC connector with 0.039" pitch, 300VAC dielectric voltage, and -35 to 85°C operating range. Ideal for commercial applications, it features a polarized housing, bellowed contact design, and crimp termination for reliable signal transmission in cable assemblies.
Median Price
$0.406
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$0.322
100+ parts
-
1k+ parts
$0.268
10k+ parts
$0.252
Interstate Connecting
$0.389
$0.339
$0.304
Mouser Electronics
$0.600
$0.385
$0.341
$0.293
DigiKey
$0.430
$0.366
$0.343
Master Electronics
$0.423
$0.354
$0.332
Verical
$0.456
Element14
$0.357
$0.337
RS (Exports)
$0.305
$0.219
Newark
$0.564
$0.358
Farnell
$0.197
$0.177
Chip1Stop
Nova Conductors
Maritex
$0.618
$0.398
$0.313
Electro Sonic
$0.386
$0.320
$0.233
Vyrian
IBS Electronics
$0.506
$0.417
$0.394
Prism Electronics
Ampacity Inc.
$0.186
Semicontronic
$0.181
$0.180
Corohmni
$0.265
Argo Parts USA
$0.266
$0.259
Netroflash
$0.255
$0.249
Advanced Electronics
$0.273
Aztec Data Supply Inc.
$1.790
Kepictronics
EMSNET (Excess)
Authorized Procurement Solutions
Continental Prestige Electronics
$0.306
Assy Fe
The small contact pitch allows for high-density connections, making this product suitable for applications where space is limited.
The appropriate body length ensures compatibility with various devices and allows for secure connections.
High insulation resistance helps prevent electrical leakage and ensures reliable performance.
The compact body width allows for easy installation in tight spaces and enhances the overall versatility of the connector.
The high dielectric voltage withstand capability ensures safety and reliability in different voltage environments.
The high maximum operating temperature makes this connector suitable for a wide range of applications, including those with elevated temperatures.
Polyamide is a durable and heat-resistant material, providing excellent insulation properties for safe and reliable connections.
The high rated current capacity allows for efficient signal transmission, making this connector ideal for signal applications.
Low contact resistance ensures minimal signal loss and reliable electrical conductivity for optimal performance.
The locking mounting option ensures secure and stable connections, reducing the risk of accidental disconnections.
Headers & Edge Type Connectors DF19-20S-1C attributes and parameters. Explore more Headers & Edge Type Connectors devices from Hirose Electric
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Minimum Insulation Diameter:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
Minimum Withdrawal Force (N):
DF19-20S-1C Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
BAV99-7-F
Multicomp Pro
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
FDLL4148
National Semiconductor
Sangdest Microelectronics (Nanjing)
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
Continental Device India
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
XHP-4-R
J S T Mfg
XHP-4-R by J S T Mfg is a 4-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts, CABLE mounting, and CRIMP termination. Ideal for applications requiring secure cable connections in electronic devices.
09-50-3041
Molex
Molex 09-50-3041 is a board connector with 0.156" mating pitch, 0.62"x.25"x.625" body dimensions, and POLYAMIDE insulator material. It has 4 contacts, FEMALE gender, PLUG shell style, and CRIMP termination type for CABLE mounting applications in commercial settings.
78171-0003
Molex 78171-0003 is a board connector with 0.047" pitch, 100M ohm insulation resistance, and 500VAC dielectric voltage. Ideal for commercial applications requiring a durable male plug with surface mount termination and black insulator color.
51021-0900
The Molex 51021-0900 is a board connector with 9 contacts, 0.049" pitch, and 0.512" body length. It has a female contact gender, crimp termination type, and operates b/w -40°C to 85°C. Ideal for commercial applications requiring reliable cable mounting with locking option.
68612214122
Wuerth Elektronik & Kg
68612214122 by Wurth Elektronik is a FFC/FPC connector with 22 contacts, 0.039" pitch, and 1A signal current rating. Ideal for board mounting applications, it features polyphenylene sulfide insulation material and tin over nickel contact finish. Operating b/w -25°C to 85°C, it offers high durability with 25 cycles and meets UL standards for reliability.
DTM06-2S
TE Connectivity
TE Connectivity's DTM06-2S is a 2-contact board connector with 0.157" pitch, rated for 7.5A signal current at 250V. Its glass-filled polyamide insulator and UL94V-0 flammability rating make it ideal for cable mounting applications requiring a polarized housing and wire termination.
71918-140LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 71918-140LF is a 40-contact board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a 707VAC dielectric voltage rating and operates b/w -65°C to 125°C temperature range. With matte tin over nickel finish, it offers reliable signal current of up to 3A.
71922-220LF
Amphenol's 71922-220LF header connector features a 0.1" pitch, 2 rows with 20 contacts, and matte tin over nickel finish. Ideal for board connections in commercial applications, it offers high insulation resistance of 105M ohm and operates b/w -65°C to 125°C temperature range.
XHP-3
XHP-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.098" pitch, suitable for CABLE mounting. Featuring POLYAMIDE6 insulator and UL94V-0 flammability rating, it operates b/w -25 to 85°C. With 1000VAC dielectric voltage and 3A signal current, it's ideal for applications requiring FEMALE SQ PIN-SKT contacts.
B14B-PUDSS-1(LF)(SN)
B14B-PUDSS-1(LF)(SN) by J S T Mfg is a 1-row loaded board connector with 14 contacts. It has a terminal pitch of 2mm and uses solder termination. This connector is commonly used in applications requiring male contact gender and straight mounting style.
B8B-PH-SM4-TB(LF)(SN)
B8B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 8 contacts, made of COPPER ALLOY. It features Tin/Copper (Sn/Cu) termination finish and has a terminal pitch of 2mm. Ideal for surface mount applications in headers & edge type connectors.
TMM-106-01-L-S
Samtec
The Samtec TMM-106-01-L-S is a board connector with 6 contacts, featuring a mating contact pitch of 0.079", matte tin termination finish, and phosphor bronze contact material. It has a max operating temperature of 125°C and min of -55°C, making it suitable for commercial applications requiring reliable signal transmission on PCBs with rectangular contact patterns.
801-43-030-10-003000
Mill-max Mfg
801-43-030-10-003000 by Mill-max Mfg is a GOLD-finished BOARD CONNECTOR with 30 contacts on a 2.54mm pitch. It features FEMALE contacts in SOCKET style for STRAIGHT mounting on the board. Ideal for high-quality solder connections in electronic applications.
DT06-3S-EP06
TE Connectivity's DT06-3S-EP06 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125°C. Ideal for cable mounting applications, it has a polarization key and UL 94V-0 flammability code.
B4B-PH-K-S(LF)(SN)
B4B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator material and BRASS contact material. Ideal for applications requiring a male SQ PIN-SKT contact style on a RECTANGULAR PCB pattern.
09032966825
Harting Electronics & Kg
09032966825 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Insulation Resistance of 1000000000000 ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for board connections in commercial applications due to its durability, UL Flammability Code rating of 94V-0, and rated current signal capacity of 2A.
1-1473005-1
TE Connectivity 1-1473005-1 is a PCMCIA connector with 200 contacts, rated at 0.5A. It features POLYETHYLENE insulator, UL94V-0 flammability code, and operates b/w -55 to 85°C. Ideal for board mounting applications requiring a right angle socket with surface mount termination.
BM02B-GHS-TBT(LF)(SN)(N)
BM02B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a 1-row, surface mount board connector with tin termination contact finish. It has 2 contacts and a terminal pitch of 1.25mm. This connector is commonly used in headers & edge type connectors for various applications.
BM15B-SRSS-TB(LF)(SN)
BM15B-SRSS-TB(LF)(SN) by J S T Mfg is a 15-contact board connector with 0.039" pitch, suitable for PCB mounting. Featuring TIN finish, it has an insulation resistance of 100M ohm and operates b/w -25 to 85°C. Ideal for applications requiring male contacts, such as in electronics or telecommunications equipment.
22-14-2104
The Molex 22-14-2104 is a board connector with 10 contacts, rated at 2.5A signal current and featuring a mating contact pitch of 0.1". With a body length of 0.996", it is designed for PCB edge locking hook mounting applications, offering durability of 25 cycles and insulation resistance of 500000000000 ohm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DF19G-20P-1H(52)
Hirose Electric
DF19G-20P-1H(52) by Hirose Electric is a 20-contact FFC/FPC connector with 0.93"x.065"x.224" dimensions, POLYAMIDE insulator, and UL 94V-0 flammability rating. Ideal for board mounting in applications requiring right angle receptacle connectors with square pin sockets.
DF19G-20P-1H(54)
DF19G-20P-1H(54) by Hirose Electric is a 20-contact board connector with 0.039" mating pitch, 0.943" body length, and 500M ohm insulation resistance. Ideal for surface mount termination in applications requiring a durable, right-angle mounting style with male contact gender and phosphor bronze material.
DF19G-20S-1C(05)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: PLUG;
DF19G-20S-1C(06)
DF19G-20S-1C(06) by Hirose Electric is a FFC/FPC connector with 0.039" pitch, 500M ohm insulation resistance, and 300VAC dielectric voltage. Ideal for applications requiring a durable, female socket connector with 20 contacts, UL-rated at 94V-0 flammability for temperatures ranging from -35 to 85°C.
DF19G-20S-1C
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Operating Temperature: -35 Cel; Additional Features: LOW PROFILE;
DF19G-20P-1H(56)
DF19G-20P-1H(56) by Hirose Electric is a 20-contact board connector with gold finish, suitable for commercial applications. Featuring a mating contact pitch of 0.039", insulation resistance of 500MΩ, and operating temperatures from -35°C to 85°C, it is ideal for surface mount termination on PCBs in various electronic devices.
DF19G-20P-1H(59)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE;
DF19G-20P-1H
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; MIL Conformity: NO; Termination Type: SURFACE MOUNT;
DF19G-20P-1H(55)
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.039;
DF19G-30S-1C(05)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 300VAC; Filter Feature: NO;
DF19G-8S-1C(05)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Termination Type: CRIMP; Mating Contact Finish: NOT SPECIFIED;
DF19G-30P-1H(54)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE; JESD-609 Code: e2;
DF19G-20S-1F(05)
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Terminal Pitch (mm): 1; Termination Contact Finish: Tin (Sn); IEC Conformity: NO;
DF19G-14S-1C(06)
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE; Reference Standard: UL;
DF19G-30S-1C(06)
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 300VAC; No. of Connectors: ONE; Mounting Option-1: LOCKING;
DF19G-14S-1C
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: CABLE; Termination Contact Finish: GOLD;
DF19G-14S-1C(05)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Total No. of Contacts: 14; Mating Contact Finish: NOT SPECIFIED;
DF19G-30P-1H(56)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
DF19G-14P-1H(52)
DF19G-14P-1H(52) by Hirose Electric is a FFC/FPC connector with 0.039" pitch, 500M ohm insulation resistance, and 300VAC dielectric voltage. Ideal for board mounting applications in electronics, it features a polarized housing, black insulator color, and right-angle mounting style.
DF19-14S-1C
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Additional Features: LOW PROFILE; Insulation Resistance: 500000000 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved