Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec's MMS-125-02-L-DV-P-TR is a 2-row, 50-contact board connector with phosphor bronze contacts and gold mating finish. Featuring tin termination with nickel barrier, it has a 2mm terminal pitch for surface mount applications. Ideal for various electronic devices requiring reliable female connectors in straight mounting style.
Median Price
$76.500
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$74.970
1k+ parts
$72.001
10k+ parts
$70.561
Vyrian
-
Nova Conductors
AZTECH Wire
$13.510
Netroflash
The use of Tin with Nickel barrier ensures better conductivity and corrosion resistance, making this product durable and reliable.
Having 2 rows loaded allows for more connectivity options and versatility in use.
Specifically designed for board connections, ensuring a secure and stable connection.
Phosphor Bronze is known for its excellent electrical conductivity and durability, providing a reliable connection.
Gold mating contact finish provides superior conductivity and ensures a longer lifespan for the connector.
With 50 contacts, this product offers ample connectivity for various applications.
Designed for board mounting, ensuring easy and secure installation.
A terminal pitch of 2mm allows for compact design and efficient use of space on the board.
Surface mount termination provides a more streamlined and compact design, suitable for modern electronic devices.
Female contact gender is commonly used for board-to-board connections, offering secure and stable connections.
Straight mounting style ensures easy alignment and installation on the board, making it user-friendly.
Headers & Edge Type Connectors MMS-125-02-L-DV-P-TR attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
MMS-125-02-L-DV-P-TR Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM358N
Kec
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STMicroelectronics
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2821
Singatron Enterprise
BOARD CONNECTOR; MIL Conformity: NO; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: 2821;
61201021621
Wuerth Elektronik & Kg
61201021621 by Wurth Elektronik is a board connector with 10 contacts, gold finish, and 3A signal current rating. It features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
SM04B-SRSS-TB(LF)(SN)(P)
J S T Mfg
SM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a 2-row BOARD CONNECTOR with 0.039" pitch, 1A signal current, and 100M ohm insulation resistance. Ideal for board mounting applications requiring a male contact gender, POLYAMIDE insulator material, and operating temperatures from -25 to 85°C.
20021111-00010T4LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 20021111-00010T4LF is a board connector with 10 contacts, rated for 1A signal current. It features a mating contact pitch of 0.05", insulation resistance of 100M ohm, and operates b/w -40°C to 125°C. Ideal for commercial applications requiring durable connectors with high mating cycles.
22-12-2061
The Molex 22-12-2061 is a board connector with mating contact pitch of 0.1", insulation resistance of 50G ohm, and dielectric voltage rating of 1500VAC. It is used in applications requiring a durable, right-angle mounting style for commercial reliability.
70107-0004
Molex 70107-0004 is a BOARD CONNECTOR with 5 contacts, UL 94V-0 rated. It features MALE gender, CRIMP termination, and CABLE mounting. Ideal for various applications requiring reliable edge type connectors.
87438-0443
The Molex 87438-0443 is a board connector with 4 contacts, featuring a mating contact pitch of 0.059" and insulation resistance of 1G ohm. It has a body length of 0.287", operates b/w -55 to 105°C, and is ideal for commercial applications requiring a durable, polarized housing with matte tin finish.
103956-9
TE Connectivity
TE Connectivity 103956-9 is a board connector with 10 contacts, 0.1" pitch, and 3A signal rating. It features tin/lead finish, polyethylene insulation, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable female connectors with polarization key in black color.
71600-006LF
71600-006LF by Amphenol is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. It features 50B ohm insulation resistance, 1414VAC dielectric voltage, and operates b/w -65 to 105°C. Ideal for commercial applications requiring a durable female receptacle with locking mounting option.
BM03B-SRSS-TB(LF)(SN)(P)
BM03B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 0.039" pitch, 0.197" body length, and 100000000 ohm insulation resistance. It operates b/w -25 to 85 °C, has a dielectric voltage of 500VAC, and features POLARIZED HOUSING for applications requiring high signal current in PCB mounting setups.
43645-0600
The Molex 43645-0600 is a board connector with 6 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for commercial applications requiring durable connections, this header connector has a polyester insulator and UL94V-0 flammability rating.
53261-1071
Molex 53261-1071 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications requiring male blade pin-skt contacts in right-angle mounting style with surface mount termination.
DF11-16DS-2C(20)
Hirose Electric
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
DTM04-12PA
TE Connectivity's DTM04-12PA is a 2-row board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 7.5A signal current. With dimensions of 1.72" x 0.796" x 1.575", it operates b/w -55°C to 125°C, suitable for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
SHF-105-01-L-D-SM-LC-TR
Samtec
BOARD CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
78171-0003
Molex 78171-0003 is a board connector with 0.047" pitch, 100M ohm insulation resistance, and 500VAC dielectric voltage. Ideal for commercial applications requiring a durable male plug with surface mount termination and black insulator color.
801-47-053-10-002000
Mill-max Mfg
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
104031-0811
104031-0811 by Molex is a PCB connector with 8 contacts, gold finish, and 0.043" pitch. It has a glass-filled liquid crystal polymer insulator, operates b/w -25°C to 85°C, and offers durability of 10k cycles. Ideal for commercial applications requiring male compression contacts in right-angle mounting on boards.
155222-2200-RA-WE
3m Electronic Products Division
3M Electronic Products Division's 155222-2200-RA-WE is a BOARD CONNECTOR with Matte Tin (Sn) finish. Featuring 22 contacts, it has GOLD (10) OVER NICKEL (50) mating finish. Ideal for surface mount applications with 2mm terminal pitch, this connector is UL 94V-0 rated.
B06B-PASK(LF)(SN)
B06B-PASK(LF)(SN) by J S T Mfg is a board connector with 6 contacts, 0.079" pitch, and 800VAC dielectric voltage. It features TIN finish, UL standard, and operates b/w -25 to 85 °C. Ideal for PCB applications requiring male connectors with press fit termination and rectangular contact pattern.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MMS-102-02-F-SH-TR
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER; Total No. of Contacts: 2;
MMS-110-01-L-SV
The Samtec MMS-110-01-L-SV is a board connector with 10 contacts, featuring a mating contact pitch of 0.079", TIN over nickel termination finish, and liquid crystal polymer insulator. It has a rated current of 3.9A and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
MMS-110-01-L-SV-01
The Samtec MMS-110-01-L-SV-01 is a board connector with 9 contacts, rated for 3.9A signal current. Featuring a mating contact pitch of 0.078", it has an insulation resistance of 5Gohm and operates b/w -55°C to 125°C. Ideal for applications requiring durable connectors with high insulation resistance and temperature tolerance.
MMS-110-01-L-SV-10
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 125;
MMS-114-02-L-SH-TR
Samtec's MMS-114-02-L-SH-TR is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. Featuring liquid crystal polymer insulator and tin finish with nickel barrier, it operates b/w -55°C to 125°C. With right-angle mounting and surface mount termination, this polarized housing connector offers reliable signal current of 3.9A.
MMS-107-02-L-DV
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Operating Temperature: -55 Cel;
MMS-125-01-L-DV
Samtec's MMS-125-01-L-DV is a 50-contact, 2-row board connector with a mating contact pitch of 0.079". Featuring matte tin termination and liquid crystal polymer insulator, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, polarized housing with gold finish contacts.
MMS-104-02-L-DV-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; JESD-609 Code: e3; Termination Type: SURFACE MOUNT;
MMS-104-02-L-DV-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Length: .338 inch;
MMS-104-02-L-DV-A-K
Samtec's MMS-104-02-L-DV-A-K is a 2-row, 8-contact board connector with phosphor bronze contacts and gold mating finish. It features surface mount termination, tin contact finish with nickel barrier, and a terminal pitch of 2mm. Ideal for applications requiring straight mounting style in headers & edge type connectors.
MMS-104-02-L-DV-A-K-FR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
MMS-104-02-L-DV-A-M-TR
Samtec's MMS-104-02-L-DV-A-M-TR is a 2-row, 8-contact board connector with gold mating finish. With a dielectric voltage of 1050VAC and insulation resistance of 5Gohm, it suits applications requiring high current signal ratings up to 3.9A. The surface-mount termination type and phosphor bronze contact material make it ideal for straight mounting on PCBs with a pitch of 2mm.
MMS-104-02-F-DV-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; No. of Connectors: ONE; Mixed Contacts: NO;
MMS-110-02-S-SV-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
MMS-120-01-L-DV
Samtec MMS-120-01-L-DV is a 40-contact, dual-row board connector with 0.079" pitch, ideal for commercial applications. Features include liquid crystal polymer insulator, gold mating contact finish over nickel, and tin termination with nickel barrier. Operating temperature range from -55 to 125°C makes it versatile for various PCB designs.
MMS-121-02-L-DV
Samtec's MMS-121-02-L-DV is a 2-row, 42-contact board connector with a mating contact pitch of 0.079". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, polarized housing design and surface mount termination.
MMS-121-02-L-DV-K-TR
Samtec's MMS-121-02-L-DV-K-TR is a 2-row, 42-contact board connector with phosphor bronze contacts and gold mating finish. It features surface mount termination with tin contact finish and nickel barrier. Ideal for board mounting applications requiring a pitch of 2mm, especially in electronics and telecommunications industries.
MMS-103-02-L-DV-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Width: .157 inch;
MMS-104-01-L-SH-01
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; No. of Connectors: ONE; No. of Rows Loaded: 1;
MMS-104-02-F-DV-A-K
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Filter Feature: NO; DIN Conformance: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved