Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 54104-4031 is a FFC/FPC connector with 40 contacts, 0.020" pitch, and gold termination finish. Ideal for board mounting applications with a temperature range of -20 to 85°C. Features include polyamide insulator, 250VAC voltage rating, and UL94V-0 flammability code.
Median Price
$1.995
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.450
100+ parts
$1.900
1k+ parts
$1.730
10k+ parts
$1.600
Mouser Electronics
$3.010
$2.180
$1.850
$1.760
DigiKey
$3.270
$2.290
-
Newark
$3.360
$2.510
$2.160
Adafruit Industries
$10.161
$9.653
Master Electronics
$1.750
Verical
$1.990
$1.840
Powell Electronics
$2.000
Arrow
Avnet
$1.637
Sager
PEI Genesis
Farnell
$1.921
TTI Europe
TTI
$1.570
Element14
$2.420
Heilind Electronics
$1.934
Distrelec
Interstate Connecting
Digiode
$1.273
TME
$1.910
$1.470
$1.400
TestEquity
$2.030
Nova Conductors
$2.320
Maritex
$2.374
$1.772
$1.559
Chip Stock
Flip Electronics
IBS Electronics
$0.996
$0.926
NAC Semi
$2.100
Vyrian
Rutronik
$0.830
Connect4Technologies Inc.
ComSIT Distribution GmbH
ComSIT USA
Component Sense
$2.213
$1.950
VNN
R&J Components
Classic Components Corporation
North Shore Components
Prism Electronics
Semi Source
J2 Sourcing AB
Speed Components Ltd
Semicontronic
$1.190
$1.160
$1.154
Corphita
$1.206
Aztec Data Supply Inc.
$2.076
Argo Parts USA
Netroflash
Andel Nordic
$5.566
$5.343
Advanced Electronics
Modulus Dynamics
$10.409
RC Electronics
$1.980
$1.940
Kepictronics
GreenTree Electronics
Authorized Procurement Solutions
Perfect Parts
Assy Fe
Continental Prestige Electronics
$1.260
Infinite Electronics LLP (Excess)
Abacus Technologies
EMSNET (Excess)
Robosynatics
$3.431
$3.361
Lucentia Tech
Cyclops Electronics Ltd (Excess)
Futuretech Components
The tight pitch allows for high density connections, making it suitable for compact applications.
The longer body length provides ample space for secure PCB mounting, ensuring stability.
The high insulation resistance prevents electrical leakage, ensuring reliable performance.
The slim body width is ideal for space-constrained designs without sacrificing functionality.
The high voltage rating ensures safe and stable operation even in fluctuating power conditions.
The gold finish offers excellent conductivity and corrosion resistance for long-lasting connections.
The durable polyamide material provides insulation and protection, increasing the product's lifespan.
The fitting nail mounting option simplifies installation and enhances the product's durability.
With a high temperature tolerance, this product can withstand demanding operating conditions.
The low minimum operating temperature ensures reliable performance in cold environments.
The thick plating offers enhanced durability and conductivity, making it an optimal choice for long-term use.
This flexible connector type allows for easy cable routing and reliable connections in varied applications.
The UL94V-0 flammability rating ensures fire safety compliance, making it a secure choice for electronic devices.
The high signal current rating allows for efficient data transmission and reliable signal integrity.
The white insulator color provides visibility and clarity for easy installation and maintenance.
Compliant with UL standards, this product meets industry safety and quality requirements.
With a high number of contacts, this product supports complex circuit connections for versatile applications.
The board mounting type offers secure attachment and stable connections for reliable performance.
The small terminal pitch allows for high density connections, ideal for space-saving designs.
The rectangular contact pattern enables easy alignment and secure connections for efficient PCB assembly.
The surface mount termination type simplifies PCB assembly and offers space-saving benefits.
The low withdrawal force design of ZIF ensures easy and quick removal, making maintenance hassle-free.
The female contact gender provides reliable mating with complementary connectors, ensuring secure connections.
The low contact resistance minimizes signal loss and ensures efficient data transmission.
The right angle mounting style offers versatile installation options for different PCB layouts.
The bellows style contact design provides flexibility and durability for reliable connections in varying conditions.
The ZIF insertion force ensures secure and easy connection, enhancing the product's user-friendly design.
The locking mounting option provides additional security and stability, preventing accidental disconnections.
The rectangular contact pattern ensures precise alignment and secure connections for optimal electrical performance.
This product's commercial reliability makes it a trusted choice for a wide range of industrial and consumer applications.
Headers & Edge Type Connectors 54104-4031 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
54104-4031 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Yangzhou Yangjie Electronics
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
1042240820
Molex
Molex 1042240820 is a PCB connector with 0.1" pitch, 500VAC voltage withstand, and 1000000000 ohm insulation resistance. Ideal for board mounting applications requiring a durable, polarized housing with right-angle socket style connectors.
341-054-500-101
Edac
Edac 341-054-500-101 is a CARD EDGE CONNECTOR with 54 contacts at 0.1" pitch. It has an insulation resistance of 5Gohm, rated for 3A signal current, and operates b/w -40 to 105°C. Ideal for wire wrap termination in applications requiring high contact reliability and low withdrawal force.
TMM-106-01-L-S
Samtec
The Samtec TMM-106-01-L-S is a board connector with 6 contacts, featuring a mating contact pitch of 0.079", matte tin termination finish, and phosphor bronze contact material. It has a max operating temperature of 125°C and min of -55°C, making it suitable for commercial applications requiring reliable signal transmission on PCBs with rectangular contact patterns.
XAP-10V-1
J S T Mfg
XAP-10V-1 by J S T Mfg is a 10-contact BOARD CONNECTOR with FEMALE contacts, PLUG body style, and CRIMP termination. It has UL 94V-0 flammability rating and is used for CABLE mounting applications in Headers & Edge Type Connectors.
292171-9
TE Connectivity's 292171-9 is a board connector with 0.079" mating contact pitch, 1000000000 ohm insulation resistance, and 125V rated voltage. Ideal for commercial applications, it features GLASS FILLED POLYAMIDE insulator material and supports wire sizes from 28 AWG to 22 AWG.
GHR-05V-S
GHR-05V-S by J S T Mfg is a 5-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure electrical connections in compact spaces.
52271-1669
Molex 52271-1669 is a FFC/FPC connector with 16 contacts, mating pitch of 0.039", and body width of 0.118". It features TIN over nickel termination finish, polyamide insulator, and UL94V-0 flammability rating. Ideal for board mounting applications requiring surface mount termination in commercial settings.
61302821121
Wuerth Elektronik & Kg
Wurth Elektronik 61302821121 is a 28-contact board connector with gold over nickel finish. It has a pitch of 0.1 inch, rated for 3A signal current, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable male connectors on PCBs with rectangular contact patterns at a spacing of 2.54mm.
DF40C-80DP-0.4V(51)
Hirose Electric
DF40C-80DP-0.4V(51) by Hirose Electric is a 2-row, 80-contact board stacking connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.016", it offers high insulation resistance of 50M ohm and withstands up to 100VAC. Ideal for PCB applications requiring reliable signal transmission in commercial environments at temperatures ranging from -35°C to 85°C.
693071010811
PCB CONNECTOR; Termination Contact Finish: GOLD; JESD-609 Code: e4; Mating Contact Finish: GOLD; Contact Material: COPPER ALLOY;
ZHR-8
ZHR-8 by J S T Mfg is a board connector with 8 contacts, 0.059" pitch, and 500VAC dielectric voltage. It is ideal for applications requiring a polarized housing, such as cable mounting with crimp termination. With a temperature range of -25 to 85°C, it offers reliable performance in various environments.
FTSH-110-01-L-DV-K-A-P
Samtec's FTSH-110-01-L-DV-K-A-P is a 2-row, 20-contact board connector with a contact pitch of 1.27mm. It features gold mating contacts over nickel, suitable for commercial applications with an operating temperature range from -55 to 125°C. The connector has a straight mounting style and uses liquid crystal polymer insulator material.
834-47-053-10-001000
Mill-max Mfg
BOARD CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD;
M50-3600542
Harwin Plc
The Harwin PLC M50-3600542 is a 10-contact board connector with 0.05" mating contact pitch, suitable for PCB applications. Featuring a 1A signal current rating, it has a durable design with 300 cycles lifespan and operates b/w -40°C to 105°C temperature range. The connector has tin finish contacts and polyethylene insulation material, meeting UL standards for reliability.
BM08B-SRSS-TBT(LF)(SN)
BM08B-SRSS-TBT(LF)(SN) by J S T Mfg is a 8-contact BOARD CONNECTOR with 0.039" pitch, 0.039" row spacing, and 100000000 ohm insulation resistance. It features POLYAMIDE insulator, tin finish, and operates b/w -25 to 85 °C. Ideal for applications requiring a polarized housing with UL94V-0 flammability rating.
M50-3600542P
M50-3600542P by Harwin Plc is a 10-contact, surface mount board connector with a terminal pitch of 1.27mm. It features tin contact finish with a nickel barrier and is suitable for applications requiring UL flammability code 94V-0 compliance.
5-534998-6
TE Connectivity's 5-534998-6 board connector features insulation resistance of 5000000000 ohm, dielectric voltage of 750VAC, and tin finish with nickel barrier. With UL flammability rating of 94V-0, it is ideal for applications requiring a rated current of 2A in temperatures ranging from -65 to 125 °C.
831-43-025-10-001000
831-43-025-10-001000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, TIN finish, and 2mm pitch. Ideal for board-to-board connections in various electronic applications due to its FEMALE contact gender, SOLDER termination, and STRAIGHT mounting style.
B5B-PH-SM4-TB(LF)(SN)
B5B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, suitable for applications requiring 2A signal current. Features include POLYAMIDE66 insulator, 800VAC dielectric voltage, and TIN (Sn) finish over COPPER contacts. Ideal for PCB mounting with RECTANGULAR contact pattern and WHITE insulator color.
51952-283LF
AMPHENOL ICC
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
54101-G08-02
Amphenol Communications Solutions
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
54104-4033
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 250VAC; Body Depth: .22 inch; Board Mounting Option: FITTING NAIL; Body Width: .079 inch;
54104-5031
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; JESD-609 Code: e4;
54104-5033
Molex 54104-5033 FFC/FPC connector with 50 contacts, 0.020" pitch, and 50000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings with operating temperatures from -20 to 85°C. Features tin/silver/bismuth contact finish and glass-filled polyamide insulator material.
54104-3031
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Termination Type: SURFACE MOUNT;
54101
Amphenol Icc
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Terminal Pitch (mm): 2.54; Mixed Contacts: NO;
5410
Erni Electronics
BOARD CONNECTOR; Manufacturer Series: 5410; MIL Conformity: NO; DIN Conformance: NO; IEC Conformity: NO;
Maxconn
BOARD CONNECTOR; MIL Conformity: NO; Manufacturer Series: 5410; IEC Conformity: NO; DIN Conformance: NO;
54101-G1000LF
Fci
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Mounting Style: STRAIGHT; Termination Contact Finish: TIN OVER NICKEL;
54101-S0500LF
54101-S0500LF by Fci is a board connector with TIN over nickel finish. Featuring phosphor bronze contacts, it has gold over nickel mating finish. With 2.54mm terminal pitch, it's ideal for male contact gender in straight mounting applications.
54101-T06-00
The Amphenol Icc 54101-T06-00 is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 5G ohm. It is commonly used in commercial applications, has a max operating temperature of 130°C, and features a tin/lead finish with nickel barrier for termination contact.
54101-T08-00LF
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: TIN (160) OVER NICKEL; Terminal Pitch (mm): 2.54; MIL Conformity: NO;
54101-T10-00LF
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mounting Type: BOARD; Mating Contact Finish: TIN (160) OVER NICKEL;
54102-T0503LF
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 2;
54102-T0504LF
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: .1 inch;
54101-G05-04LF
Amphenol 54101-G05-04LF is a board connector with 0.1" contact pitch, 3A signal current rating, and -65 to 125°C operating temperature range. Ideal for commercial applications requiring high insulation resistance, UL flammability rating, and gold mating contact finish over nickel/palladium.
54101-G08-03LF
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; No. of Connectors: ONE;
54101-S08-04
54102-T0501LF
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Style: SQ PIN-SKT;
54104-4096
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved